|
|
Development of pelletization conditions for secondary energy products
Burešová, Eliška ; Batelka,, Michal (referee) ; Sokolář, Radomír (advisor)
This thesis deals with the use of secondary energy products. The teorethical part describes methods of separation of fine particles, characteristics and properties of secondary energy products and equipment suitable for pelletizing. On the basis of the theoretical part, the practical part designed and created suitable conditions for pelletizing two types of secondary energy products, namely brick dust and fly ash. These suggestions have been verified and both feedstocks and resulting pellets were tested. In accordance with the results, it is possible to say that the pelletized raw material has better properties than the raw material in its original powder state.
|
|
|
Construction of demagnetizing device of MR dampers for Hyundai
Batelka, Jiří ; Kubík, Michal (referee) ; Strecker, Zbyněk (advisor)
The aim of this thesis in to find a suitable way of demagnetizing MR damper. To achieve this goal, a device based on Arduino DUE was assembled and the effects of adjustable parameters are examinated. Decrease of remanence from original 12 mT before demagnetizing to the resulting 0,23mT was reached. It is possible to use the found effects of adjustable parameters and the device to find suitable ways of demagnetizing other devices.
|
|
|
THE USE OF SINTERED ARTIFICIAL AGGREGATES PRODUCED FROM SOLID ENERGETIC WASTE FOR CONCRETE.
Batelka, Michal ; Stehlík, Michal (referee) ; Kolář,, Karel (referee) ; Cigánek,, Jindřich (referee) ; Adámek, Jiří (advisor)
This work deals with issues aimed at the possibility of treating the material which has not been used yet – coal tailings. The work includes among others the production, its optimalization and utilization of a new type of lightweight artificial aggregate in the process of production of concrete. The possibility of manufactured the artificial aggregate is dealt with the principle of self-burning of the raw material's batch at the agglomerative grate. The optimalization of the burning process was performed both with the homogenous and the layered batch. Further part of the work focuses on the fabrication of diverse types of concrete and determination of their parametres. This section is significantly extended with the comparison of basic physical and specific properities of the new type of concrete with those of the commonly produced types. The last part of presented work deals with the ecological - economic situation of these issues. The proposed solution points to the possibility of utilization of the coal tailings which are put to the tailings heaps. It was managed to optimize the burning process and to find the most convenient system for storing the raw material's batch at the agglomerative grate. Next, it was proved that the types of concrete produced with a new sort of aggregate are also suitable for fabricating the construction concrete with the strength above the border of 50 MPa, which are applicable even in harder conditions. These sorts of concrete also have a lower volume weight and very good bending properties. The major finding, which underlines the contribution of this work, is that the up to now unused material is suitable for fabrication of relatively high-quality and thermally stable aggregate of strength on the border of 5 MPa, which can be use for fabricating concrete with very good results even in this field. Another great contribution of this work can surely be the fact, that a preliminary economic balance of the manufacturing pr
|
|
|
Construction of demagnetizing device of MR dampers for Hyundai
Batelka, Jiří ; Kubík, Michal (referee) ; Strecker, Zbyněk (advisor)
The aim of this thesis in to find a suitable way of demagnetizing MR damper. To achieve this goal, a device based on Arduino DUE was assembled and the effects of adjustable parameters are examinated. Decrease of remanence from original 12 mT before demagnetizing to the resulting 0,23mT was reached. It is possible to use the found effects of adjustable parameters and the device to find suitable ways of demagnetizing other devices.
|
|
|
Development of pelletization conditions for secondary energy products
Burešová, Eliška ; Batelka,, Michal (referee) ; Sokolář, Radomír (advisor)
This thesis deals with the use of secondary energy products. The teorethical part describes methods of separation of fine particles, characteristics and properties of secondary energy products and equipment suitable for pelletizing. On the basis of the theoretical part, the practical part designed and created suitable conditions for pelletizing two types of secondary energy products, namely brick dust and fly ash. These suggestions have been verified and both feedstocks and resulting pellets were tested. In accordance with the results, it is possible to say that the pelletized raw material has better properties than the raw material in its original powder state.
|
|
|
THE USE OF SINTERED ARTIFICIAL AGGREGATES PRODUCED FROM SOLID ENERGETIC WASTE FOR CONCRETE.
Batelka, Michal ; Stehlík, Michal (referee) ; Kolář,, Karel (referee) ; Cigánek,, Jindřich (referee) ; Adámek, Jiří (advisor)
This work deals with issues aimed at the possibility of treating the material which has not been used yet – coal tailings. The work includes among others the production, its optimalization and utilization of a new type of lightweight artificial aggregate in the process of production of concrete. The possibility of manufactured the artificial aggregate is dealt with the principle of self-burning of the raw material's batch at the agglomerative grate. The optimalization of the burning process was performed both with the homogenous and the layered batch. Further part of the work focuses on the fabrication of diverse types of concrete and determination of their parametres. This section is significantly extended with the comparison of basic physical and specific properities of the new type of concrete with those of the commonly produced types. The last part of presented work deals with the ecological - economic situation of these issues. The proposed solution points to the possibility of utilization of the coal tailings which are put to the tailings heaps. It was managed to optimize the burning process and to find the most convenient system for storing the raw material's batch at the agglomerative grate. Next, it was proved that the types of concrete produced with a new sort of aggregate are also suitable for fabricating the construction concrete with the strength above the border of 50 MPa, which are applicable even in harder conditions. These sorts of concrete also have a lower volume weight and very good bending properties. The major finding, which underlines the contribution of this work, is that the up to now unused material is suitable for fabrication of relatively high-quality and thermally stable aggregate of strength on the border of 5 MPa, which can be use for fabricating concrete with very good results even in this field. Another great contribution of this work can surely be the fact, that a preliminary economic balance of the manufacturing pr
|
|
|
Graduates on the Labour Market in the Czech Republic
Vondráčková, Zdeňka ; Kaczor, Pavel (advisor) ; Batelka, Michal (referee)
The aim of my theses is to introduce to readers the current theme of graduate employment in the Czech Republic, through the analyses of current status, identification of problem areas in the employment of graduates and possible solutions. The practical part focuses on the comparison between the expectations of graduates entering the labor market and potential employers. I have used the questionnaires method. The output of my theses are recommendation proposals for graduates for smoother entry into the labor market and recommendation for potential employers.
|
guest ::
RSS feed.