|
|
Proposal of Business Processes in Services
Červinka, Jan ; Štěrba, Martin (referee) ; Jurová, Marie (advisor)
The work deals with the description of business processes in the area of services, based on the relevant theoretical knowledge, followed by analysis of the required resources, their securing as well as analysis of market environment and competition. The result of the work is my own proposal of concept and determination the conditions for its introduction in operation, which allows to realize modern service concepts in a globalized environment. Proposal of business processes in services is specified in the business plan he establishment of a fast food restaurant Subway. The thesis is focused on solving specific conditions in Hustopece.
|
|
|
Crop flow improvements at the Power Flow header
Štelcl, Michael ; Červinka, Jan (referee) ; Kašpárek, Jaroslav (advisor)
The master's thesis is focused on a design of optimal working speed of auger and belt transporter which are parts of Power Flow header for standard type of combine harvester. In the master's thesis author suggest a new simplified theory of crop flow inside the Power Flow header. The thesis contain the factors which can affect the crop flow and comparison between the Power Flow and competitor's header. The thesis also contain geometrical characteristics of crop for four types of cereal.
|
|
|
Risk in Construction Projects
Dufek, Jakub ; Ing.Jan Červinka (referee) ; Nováková, Jana (advisor)
This thesis deals with risk rating in building projects. It provides information on the entire process of management, which includes risk factors identification, their analyses, defence strategies, risk assessment, monitoring and supervision. The experimental part describes high risk situations in a selected building project and their possible solutions, including preventive measures.
|
|
|
Threshing system of combines harvester
Štelcl, Michael ; Červinka, Jan (referee) ; Škopán, Miroslav (advisor)
This bachelor thesis is about evaluation of maximum throughput of straw and grain together, in various types of threshing units which are used in combine harvesters. It provides basic informations about two types of combine field-test procedures. In the end of work is shortly describe current development of combine harvesters and contain two proposals of alternative constructions of threshing units according to author of this bachelor thesis.
|
|
|
Backhoe for tractor
Jurák, Pavel ; Červinka, Jan (referee) ; Škopán, Miroslav (advisor)
The aim of this thesis is a design of an additional excavator with side shift for agricultural tractor with power from 50 to 70 kW. The excavator is controlled by a hydraulic circuit. The main element here is an independent pump with a 40l / min supply, which is driven by a gearbox using a cardan shaft. The hydraulic circuit has been designed so that the temperature of the hydraulic fluid does not exceed the allowable limit. An important role is played by the connection to the tractor where was used a modified three-point hitch. This coupling of the tractor with the frame of excavator ensures sufficient rigidity when performing excavation work. When calculating the excavation resistance, was considered the soil of the 4th class, this is hard-to-disconnect soil or clay. The calculation implies that the machine can be used with backhoe buckets up to 500 mm wide. Strength analysis of boom was performed in Ansys Workbench 2019. Safety coefficients were determined for individual components. The overall safety coefficient is equal to 1.7.
|
|
|
Comparison of selected methods of valuation for residential and commercial units in the district of Žďar nad Sázavou
Dufek, Jakub ; Červinka, Jan (referee) ; Hlavinková, Vítězslava (advisor)
This diploma thesis is focused on the comparison of selected methods of apartment and commercial units valuation in the district of Žďár nad Sázavou. The theoretical part describes the basic notions connected with valuation, describes the methods of valuation and also the valuated location itself. The practical part deals with the apartment and commercial units valuation using these metods – the metods according to price provision, specifically comparative technice, then the komparative method itself byt not according to price provision and finály using the yield method for an assessment of the current price. In the conclusion there is comparison of all of these used methods.
|
|
|
Interaction between Mobile Working Machines and Rolled Surfaces
Pokorný, Jan ; Hrabovský, Leopold (referee) ; Červinka, Jan (referee) ; Škopán, Miroslav (advisor)
This dissertation thesis is concerning with an interaction between mobile working machines and rolled surfaces. Machines and their constructions parts behavior were observed. There are some machines that can change state of surface. And due to these change of surface the machine is in different conditions for drive and also for works. The interaction of working machines and rolled surfaces was categorized in this work and for each category here is a methodic work flow for solution of various cases. Three examples are described in this work. Some simulating programs were used for all cases and therefore there is a methodic work flow for creating and simulating of models. Three described examples include a complex solution of hydraulic drive for vibration exciter of vibration roller, small cleaner of canalizations with aim on load case to frame of this cart. The third example describes solution of undercarriage frames of agricultural semi-trailers. This example is the most extensive chapter from this work due to including of marketing research at the beginning of development and also verification of simulated results with results from real prototype tests at the end of development of these undercarriage frames.
|
|
|
Backhoe for tractor
Jurák, Pavel ; Červinka, Jan (referee) ; Škopán, Miroslav (advisor)
The aim of this thesis is a design of an additional excavator with side shift for agricultural tractor with power from 50 to 70 kW. The excavator is controlled by a hydraulic circuit. The main element here is an independent pump with a 40l / min supply, which is driven by a gearbox using a cardan shaft. The hydraulic circuit has been designed so that the temperature of the hydraulic fluid does not exceed the allowable limit. An important role is played by the connection to the tractor where was used a modified three-point hitch. This coupling of the tractor with the frame of excavator ensures sufficient rigidity when performing excavation work. When calculating the excavation resistance, was considered the soil of the 4th class, this is hard-to-disconnect soil or clay. The calculation implies that the machine can be used with backhoe buckets up to 500 mm wide. Strength analysis of boom was performed in Ansys Workbench 2019. Safety coefficients were determined for individual components. The overall safety coefficient is equal to 1.7.
|
|
|
Crop flow improvements at the Power Flow header
Štelcl, Michael ; Červinka, Jan (referee) ; Kašpárek, Jaroslav (advisor)
The master's thesis is focused on a design of optimal working speed of auger and belt transporter which are parts of Power Flow header for standard type of combine harvester. In the master's thesis author suggest a new simplified theory of crop flow inside the Power Flow header. The thesis contain the factors which can affect the crop flow and comparison between the Power Flow and competitor's header. The thesis also contain geometrical characteristics of crop for four types of cereal.
|
|
|
Valuation of the company KRPA PAPER, a.s.
Červinka, Jan ; Brabenec, Tomáš (advisor) ; Lepič, Lukáš (referee)
The subject of the thesis is the market value of the company KRPA PAPER, a.s. as of December 31st, 2014. The aim of the thesis is an aplication of teoretical knowledge in a particular example. The purpose is to determine the net market value of the company. The thesis is divided into chapters which represent the typical phases of the valuation of a company. At the beginning of each chapter there is a brief description of its purpose in a business valuation. In the introduction part the basic aspects of the valuation are described. The financial and strategic analysis, the value drivers, the financial plan and the valuation chapters follow. For the valuation itself the DCF Entity method is used. The discount on the entity level is applied.
|
guest ::
RSS feed.