|
|
Use of renewable resources for a multifunctional house
Andrš, Matěj ; Počinková, Marcela (referee) ; Formánek, Marian (advisor)
Master thesis deals with the design of a new multifunctional building. The theoretical part introduces heat sources, discussing their basic properties and types. The computational part describes a specific heating system design for the extended building permit and the design of individual components in the heating system. A ground/watter source heat pump is proposed as the heat source, with heat extracted from the ground through deep wells. The building will be heated using underfloor heating. The technical report then outlines the requirements and technical specifications. The project documentation is provided in the attachments. The experimental part of master thesis focuses on the operation of an air/water heat pump, aiming to investigate how the heat pump performs in relation to outdoor temperatures compared to supply temperatures. The operating times of individual parts of the heat pump were then evaluated. This section includes graphs and the results obtained.
|
|
|
Heating and cooling systems in a multifunctional building
Fuksa, Lukáš ; Horák, Petr (referee) ; Formánek, Marian (advisor)
The master´s thesis is about the design of heating and cooling of a multifunctional house. The building is functionally divided into parts of shops, administration and apartments. Thesis describes various cooling options and basic types and functions of air conditioning systems. Three variants of the system at the level for expanded building permits and their evaluation are developed. The selected variant is developed at the project level for the construction.
|
|
| |
|
|
Ventilation catering operations
Havlátová, Kristýna ; Rubinová, Olga (referee) ; Formánek, Marian (advisor)
The master’s thesis deals with design of heat recovery and dehumification for the hotel´s kitchen. The design is made to fullfill functional, hygienic and operational ruqirements for the internal microclimate. The main task of air-conditioning systems is to drain away heat gains and intake of requirement minimum of fresh air. The theoretical part is about analysis of internal microclimate.
|
|
|
Optimization of cooling of a family house by using a geothermal system
Buchta, Jan ; Formánek, Marian (referee) ; Šikula, Ondřej (advisor)
The master’s thesis deals with optimization of cooling system of family house using borehole heat exchanger as a single cooling source. In the experimental part of the thesis was carried out long-term mearurements. The main part of the master’s thesis is the development and verification mathematical and physical model of thermal behavior chilled room. The result are computer simulations and evaluation of individual scenarios and design requirements for a potential optimization of measurement and control system. The theoretical part generally deals with radiant cooling systems.
|
|
|
Design and optimization of a heat source for resort
Valek, Ondřej ; Počinková, Marcela (referee) ; Formánek, Marian (advisor)
This Master’s thesis deals with design of heating source and heating system in the model object. Design is based on three variants of sources and heating systems. The first option is a heating pump air/water, the second option is pellet boiler and the third option is heating pump ground/water. At first heating losses are determined. Then heating systems and related heating sources are designed. The fundamental part of these free options is a design of alternative source for central heat and and hot water and heat storage. The last part is comparison of all variants.
|
|
|
Heating and hot water of pension
Beneš, Josef ; Formánek, Marian (referee) ; Počinková, Marcela (advisor)
The Bachelor thesis deals with heating system and preparation of hot water for a boarding house building. In the thesis is introduced fundamental systematics of heat line water systems and heating distribution. By the most frequently used materials are identified advantages, disadvantages and possibilities of application. Piping joints are divided according to disassembleability and single options are furthermore described. In the calculating part is analyzed the particular building based on its characteristics. According to this analysis is the building classified from the viewpoint of energetic demands and therefore was determined its “Building envelope energy label”. Based on those and additional data was designed the heating system in correspondence with national regulations. Suggested solution takes in account efficiency, comfort, acquisition and operating costs.
|
|
|
Cooling systems for polyfunctional object.
Milatová, Adriána ; Blasinski, Petr (referee) ; Formánek, Marian (advisor)
The diploma thesis deals with the design of cooling devices of a fourteen-storey polyfunctional building with administration part and housing units. The thesis describes the physical nature of cooling, the basic types and functions of cooling systems and legislation related to cooling devices. Two types of cooling systems are selected and developed for the assigned object at the building permit design level. The work includes calculations of all elements of individual systems. The purpose of this diploma thesis is the comparison of these variants and the evaluation of suitability for use on the individual parts of the assigned building. The variant chosen is elaborated at the level of the rea-lization project, including the drawing documentation.
|
|
|
Heating of the nursing home
Michalíčková, Iveta ; Formánek, Marian (referee) ; Počinková, Marcela (advisor)
Theme of this bachelor´s thesis are problems of condensing gas boilers in the theoretical part and project of heating of nursing home is solved in the calculation part. This building has four floors and it is situated in Chotěboř. There is accommodation for patients in three floors. In one floor there is medical centre with surgeries, waiting rooms and pharmacy. Condensing boiler is source of heat. Heating of rooms is solved by panel radiators. Natural ventilation is designed in whole building.
|
|
|
Indoor environment in residential buildings
Hudcová, Nikola ; Formánek, Marian (referee) ; Počinková, Marcela (advisor)
The master‘s thesis deals with the design of heating and hot water preparation for the panel house G57 in Brno. The thesis consists of three parts, namely theoretical, computational and experimental. The theoretical part deals with the indoor environment of buildings. The calculation part deals with the complete design of the building's heating. Two variants of the design of the heat source are made, the first variant is a central heat supply and the second is a cascade of three heat pumps. Hot water preparation, fittings, circulation pumps, security devices and other equipment are designed for both heat source variants. The experimental part contains the measurement of selected parameters of the indoor environment in 3 different objects for housing. The task of the measurement was to find out whether the criteria of the indoor environment of the objects for living are met.
|
guest ::
