|
|
Deposition and characterization of SA layers from vinyltriethoxysilane
Veverka, Miroslav ; Veselý, Michal (referee) ; Čech, Vladimír (advisor)
Development of composite material is very much progressive sector and leads to evolution of material with new property. This type of material has one, but important deficiency. It is small adhesion armature to matrix. My study is sight on improvement adhesion the surface by deposition self assembled (SA) monolayer from organosilanes. Property of this layer, like thickness, surface tension, homogenity and wettability, was evaluated by the contact angle measurement and spektroscopical elipsometri.
|
|
|
Study of plasma species by mass spectroscopy
Bureš, Michal ; Čáslavský, Josef (referee) ; Čech, Vladimír (advisor)
Plasma polymer films of tetravinylsilane and mixture of tetravinylsilane and oxygen gas were deposited on silicon wafers. Oxygen gas was mixed in tetravinylsilane to improve the compatibility of thin films on glass substrates. Mass spectroscopy was employed during the cleaning of the deposition chamber to check residual gases and process gases, during plasma deposition to monitor neutral plasma species and to follow plasma stability.
|
|
|
The influence of surface modification of glass fibers on mechanical response of the GF/polyester composite
Janeček, Pavel ; Richtera, Lukáš (referee) ; Čech, Vladimír (advisor)
The diploma thesis is aimed at an influence of surface modifications of fibrous reinforcements on mechanical properties at the fiber-matrix interface in fiber reinforced composites. Glass fibers were used as reinforcements and polyester resin was the matrix. The sample of composite consisted of polymer matrix in a form of cylindrical body placed on bundle of glass fibers. The design of the sample was constructed with respect to results of Finite Element Analysis (FEA). The tensile test using a materials testing machine (Zwick) was employed to evaluate adhesion at the fiber-matrix interface. Untreated glass fibers, fibers with commercial sizing, and fibers modified by deposition of plasma polymer film using Plasma-Enhanced Chemical Vapor Deposition (PECVD) at different deposition conditions were used for fabrication of composite samples. The fibers and composite samples were analyzed by Scanning Electron Microscopy (SEM) and Confocal Laser Scanning Microscopy (CLSM).
|
|
| |
|
|
Adhesion of plasma polymer films deposited from tetravinylsilane monomer
Plichta, Tomáš ; Salyk, Ota (referee) ; Čech, Vladimír (advisor)
This bachelor thesis deals with the characterization of thin films of plasma polymers prepared from monomers of tetravinylsilane (TVS) and deposited on planar silicon substrates. Plasma enhanced chemical vapor deposition (PE CVD) was used as a method of thin films preparation. Three power series were prepared from pure TVS and two mixtures TVS with argon and oxygen. The main characterization methods were scratch tests and atomic force microscopy (AFM) is used to assess the adhesion degree of the layers and topography of scratches. To assess the characteristics and context the layer thickness was measured by spectroscopic ellipsometry (ELL) and elastic modulus using nanoindentation. The collected data were used to assess the reproducibility of the results with the regard to the purity of substrates and adhesion layers, depending on the deposition conditions and layers aging.
|
|
|
Adhesion of a-SiOC:H films on planar substrates
Lepcio, Petr ; Salyk, Ota (referee) ; Čech, Vladimír (advisor)
This bachelor thesis deals with preparation of thin films of plasma polymers prepared by plasma-enhanced chemical vapor deposition. Tetravinylsilane was used as a monomer. Two sets of samples were prepared. Samples of the first set were prepared at different effective powers from pure tetravinylsilane and samples of the second set were prepared from deposition mixture of tetravinylsilane with different oxygen content at constant effective power. The film thickness was evaluated by spectroscopic ellipsometry and chemical structure by infrared spectroscopy. A scratch test was used to determine adhesion characterized by the critical normal load. An appearance of performed scratches was obtained by atomic force microscopy (AFM). Film adhesion influenced by the effective power and oxygen content in deposition mixture was discussed based on the received data.
|
|
|
Analysis of a-SiOC:H films by selected spectroscopic techniques
Ondreáš, František ; Zmeškal, Oldřich (referee) ; Čech, Vladimír (advisor)
This bachelor thesis deals with preparation of thin plasma polymer films on the basis of tetravinylsilane by plasma-enhanced chemical vapour deposition and film characterization by selected spectroscopic techniques. The theoretical part is a background research about plasma chemistry and spectroscopic methods of characterisation of thin plasma polymer films. The practical part consisted of preparation of two series of samples and their characterization. Prepared thin plasma polymer films were characterized by selected spectroscopic techniques. Thickness and optical constants were determined by spectroscopic elipsometry. Chemical structure was characterized by infrared spectroscopy. The results indicate the possibility of managing physico-chemical properties of thin plasma polymer films on the basis of tetravinylsilane by deposition conditions and thus possibility of preparation materials tailored to a variety of applications.
|
|
|
Fiber reinforcements for polymer composites
Knob, Antonín ; Grégr, Jan (referee) ; Čech, Vladimír (advisor)
The bachelor thesis is concerned with an influence of surface modification of fibrous reinforcements on mechanical properties at the fiber-matrix interface in fiber-reinforced polymer composites. Polyester resin was used as a matrix, glass and carbon fibers were the reinforcements. The composite sample consisted of polymer matrix in a form of cylindrical body placed on a bundle of fibers. Untreated fibers and fibers with a commercial sizing were used for fabrication of composite samples. The tensile test using a materials testing machine (Zwick) was employed to evaluate adhesion at the fiber-matrix interface.
|
|
|
Deposition of plasma polymer films
Malá, Michaela ; Brablec, Antonín (referee) ; Čech, Vladimír (advisor)
This bachelor thesis is focused on the characterization and preparation of thin polymer layers deposited by plasma-enhanced chemical vapor deposition on silicon wafer. The main part of the work is a literature review about the plasma polymerization and methods of characterization of thin polymer layers. In the experimental section were prepared thin layers of polymer from the monomer vapor of tetravinylsilane. Prepared thin films were characterized by microscopic and spectroscopic techniques. The physical and chemical properties of deposited films were studied with respect to the deposition conditions in low-temperature plasma.
|
|
|
Preparation of glass fiber/polyester composites
Horská, Pavlína ; Richtera, Lukáš (referee) ; Čech, Vladimír (advisor)
The bachelor thesis is aimed at an influence of surface modifications of fibrous reinforcements on mechanical properties at the fiber-matrix interface in fiber reinforced composites. Glass fibers were used as reinforcements and polyester resin was the matrix. The sample of composite consisted of polymer matrix in a form of cylindrical body placed on a bundle of glass fibers. The tensile test using a materials testing machine (Zwick) was employed to evaluate adhesion at the fiber-matrix interface. Untreated glass fibers and fibers with commercial sizing were used for fabrication of composite samples.
|
guest ::
