|
|
Experimental study on the release of active ingredients from gel matrices
Volhinava, Anastasiya ; Enev, Vojtěch (referee) ; Sedláček, Petr (advisor)
This thesis deals with the characterization of hydrogels containing humic substances and salicylic acid. Experimental study of the transport of active substances was performed from the gel matrix over the skin and synthetic membranes. During this work was writing literature review focused on the use of gels with humic substances in cosmetic, medical and pharmaceutical industries. The model humic hydrogels was prepared with salicylic acid and their characterization by basic methods of material analysis. These basic methods were and visual assessment of consistency during the preparation and rheology. The study of the release of active and humic substances was performed due to the vertical diffusion cells. The amount of released humic substance was characterized by UV-VIS method and the amount of released salicylic acid from gel matrix was determined by HPLC.
|
|
|
Automotive plastics with increased scratch resistance
Vida, Mikuláš ; Kučera, František (referee) ; Jančář, Josef (advisor)
The aim of this bachelor thesis was the investigation of changes of mechanical and rheological properties of nanocomposites based on PMMA, where filler was fumed silica of four types (different surface area and producer). The thesis focuses on the theoretical part of the current state of research, preparation and properties of nanocomposites. The solvent method was chosen for the preparation of nanocomposites, where silica was mixed with dissolved PMMA. Tensile mechanical properties were measured below Tg, while viscoelastic response was measured above Tg. Silica had not significant influence on the modulus below Tg, but above Tg (180 °C) both modulus, storage and loss, have increased with increasing silica content and with increasing frequency (0,1–100 Hz). The particle size and surface area of silica in a content of 1 % influenced storage modulus of nanocomposites more with respect to the content of 2 %. For samples containing 1 % showed that the significant role played particle size and surface area of silica. The greatest increase of storage and loss modulus of PMMA was reached for silica M-5 in content 1 %. All type of silica decreased tensile strength and strain with increasing silica content in the same way.
|
|
|
Thermoplastic extrusion of ceramic materials with ionic and mixed conductivity
Kaštyl, Jaroslav ; Matoušek, Aleš (referee) ; Trunec, Martin (advisor)
In the bachelor thesis, an overview of the existing literature focused on thermoplastic extrusion method was worked out and based on the findings; the conditions for extrusion of mixtures with zirconia were optimized in order to produce rods. Great attention was paid to dimensional and shape precision of ceramic parts. Two methods were applied when preparing the ceramic mixtures – mixing and dissolving. These methods have been compared on the basis of the results achieved in rheological measurements of flow properties, microstructure and dimensional accuracy of the sintered rods. Having verified the efficiency of mixture dissolving, this method was used to prepare mixtures with different contents of cellulose and binder.
|
|
|
High Pressure Viscometer
Skalický, Lukáš ; Hartl, Martin (referee) ; Křupka, Ivan (advisor)
The master´s thesis describes design of falling ball high pressure viscometer for measurements of rheological properties of liquids under high pressure and in the wide temperature range. The design is based on similar apparatuses, which are described in literature. The speed of falling sinker is measured by two optical senzors. Apparatus allows measuring of viscosity, density and optical observing structure of liquid. There was developed extensive program for the evaluation of measurement in Matlab. Apparatus is placed in the laboratory of the Institute of Machine and Industrial Design FME BUT and is used for research and creative activities.
|
|
|
Utilzation of physico-chemical analyses in study on microbial stress-response
Slaninová, Eva ; Pekař, Miloslav (referee) ; Sedláček, Petr (advisor)
This diploma thesis deals with the utilization of physico-chemical analysis in study on microbial stress–response. The main content of this work was to propose and optimize techniques and methods which are generally used in different industries. Two bacterial strains, Cupriavidus necator H16 and its mutant strain Cupriavidus necator PHB-4 producing polyhydroxyalkanoates (PHA) under certain conditions, were used as model microorganisms. Initially, microscopic teques such as transmission electron microscopy (TEM), cryo scanning electron microscopy (cryo SEM) and atomic force microscopy (AFM) were proposed and tested for the characteriozation of morphological differences of bacteria. Furthermore, viscoelastic properties of bacteria were determined and compared by the oscillatory tests of the rheology method considering another type of samples. Thermal analysis methods, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) in particular, focused on water transport and behavior of intracellular water influenced by presence of the granules of PHB in bacteria. The last technique, utilized in the study, was dynamic and electrophoretic light dispersion during pH changes for characterization of the surface properties of bacteria such as size, zeta potential and the isoelectric point.
|
|
|
Effect of sub-micrometer structural features on rheology of polymer nanocomposites
Lepcio, Petr ; Chodák,, Ivan (referee) ; doc.Ing.Marián Lehocký, Ph.D. (referee) ; Jančář, Josef (advisor)
Polymerní nanokompozity (PNCs) mají slibnou budoucnost jako lehké funkční materiály zpracovatelné aditivními výrobními technologiemi. Jejich rychlému rozšíření však brání silná závislost jejich užitných vlastností na prostorovém uspořádání nanočástic (NP). Schopnost řídit disperzi nanočástic je tak klíčovým předpokladem pro jejich uplatnění ve funkčních kompozitech. Tato práce zkoumá přípravu polymerních nanokompozitů v modelové sklotvorné polymerní matrici roztokovou metodou, technikou schopnou vytvářet prostorové uspořádání nanočástic řízené strukturními a kinetickými parametry přípravného procesu. Prezentované výsledky popisují rozdíly mezi změnami rheologického chování roztoku polystyrenu při oscilačním smyku s vysokou amplitudou (LAOS) vyvolanými nanočásticemi. Výsledky vedou k závěru, že vysoce-afinní OP-POSS nanočástice při nízkých koncentracích dobře interagují s PS a tvoří tuhé agregáty, zatímco nízko-afinní OM-POSS nanočástice za těchto podmínek neovlivňují deformační chování polymerních řetězců. Dále byla pozornost zaměřena na vliv použitého rozpouštědla na uspořádání nanočástic v SiO2/PMMA a SiO2/PS nanokompozitech, který je v literatuře prezentován jako parametr řídící prostorové uspořádání nanočástic v pevném stavu. Důraz byl kladen na kvalitativní rozdíly mezi „špatně dispergovanými“ shluky nanočástic, které byly na základě rheologie a strukturální analýzy (TEM, USAXS) identifikovány jako polymerními řetězci vázané nanočásticové klastry a dva typy agregátů, jeden termodynamického a druhý kinetického původu. Jednotlivé druhy agregátů se vyznačují odlišnými kinetikami vzniku a rozdílnými vlastnostmi jak mezi sebou, tak v porovnání s dispergovanými nanočásticemi. Pozorované typy disperze nanočástic byly kvantitativně posouzeny podle svých rheologických vlastností během roztokové přípravy, podle kterých byla vyhodnocena míra adsorpce polymeru na povrch nanočástic a atrakce ve vypuzeném objemu. Výsledky byly porovnány s teorií PRISM. Důležitost uspořádání nanočástic byla demonstrována na porovnání teplot skelných přechodů různých struktur při stejném chemickém složení.
|
|
|
Preparation, characterization and evaluation of application potential of semiIPN hydrogels
Papežíková, Hana ; Pekař, Miloslav (referee) ; Sedláček, Petr (advisor)
Aim of this thesis os to optimize set up of hydrogel based on semi-interpenetrated polymer networks. Polyhydroxyethylmethyl acrylate was chosen as an model example of hydrogel due to its common use in biomedicine. At first, thermoiniciation was used for preparation and changed to photoiniciation afterwards. Following the optimisation of the hydrogel set up with proper qualities, the polyelectrolyte sodium polystyrene sulfonate was implanted. Object of research was its impact on structure, flowing and transport features of hydrogels. All qualities were tested by drying, rheology, and fluorescence correlation spectroscopy. Results clearly validate influence of hydrogel features by polyelectrolytes.
|
|
|
Development of Material Based on Hyaluronic Acid s Hydrogels for Myocardial Regeneration
Kovářová, Lenka ; Kubala,, Lukáš (referee) ; Prokš,, Vladimír (referee) ; Pekař, Miloslav (advisor)
The thesis is focused on material development based on hyaluronic acid usable in regenerative medicine, especially for heart tissue regeneration after myocardial infarction. The object of the study is the oxidized form of hyaluronic acid (HA-Ox) and hydroxyphenyl derivative of HA (HA-TA). HA-Ox can be crosslinked with a bifunctional alkoxyamine POA and HA-TA undergoes an enzymatic reaction in the presence of hydrogen peroxide catalysed by horseradish peroxidase leading to gel formation. To describe the materials, chemical and physical properties, gelation kinetics and conditions of crosslinking reactions were studied. Hydrogels were characterized by mechanical and viscoelastic properties, degradability or stability in simulated body fluids. These hydrogels serve as scaffolds for the selected cell type. To promote cell adhesion and viability, an RGD sequence has been bonded to the structure of HA-TA. This resulting material is also compatible with selected applicators. Its viscosity and extrusion force are low enough to allow application with a catheter with a very small internal diameter. The applicability of the material through the supply tube to the hydrogel reservoir of the second SPREADS device showed good homogeneity, cell distribution and viability. Finally, the material was applied in vivo using these devices during a preclinical study.
|
|
|
Preparation of humic hydrogels for appliaction in cosmetics
Pavlicová, Renata ; Mravec, Filip (referee) ; Sedláček, Petr (advisor)
This bachelor´s thesis is focused on the preparation and characterization of hydrogels containing humic substances and assessment of their potential usefulness in cosmetic practice. Main objective of the work was to develop a literature review focusing on the potential use of humic substances in the cosmetics and pharmaceutical industries. Furthermore, the aim was to prepare model hydrogels addition of soluble humic substances in traditional cosmetic compositions and their characterization by basic methods of analysis parameters. The main investigated parameters were consistency resulting gels (assessed subjectively and subsequently by rheology), their internal pH and dry matter. The experimental results showed that incorporation of humic substances into hydrogels resulting gels acceptable characteristics for further use in cosmetic applications.
|
|
|
Derivatization of Sodium Hyaluronate as a Possible Tool for Increasing of the Stability of Model Artificial Synovial Fluid
Hrochová, Eliška ; Mravec, Filip (referee) ; Kalina, Michal (advisor)
This master thesis deals with the optimization of the procedure of modification of hyaluronic acid structure for the use in the artificial synovial liquids. Based on the literature research, the amino acid alanine was used for the modification of carboxylic group in the glucuronic acid. The main subject of study is the improvement of the stability and mechanical properties of synovial liquid. DLS microrheology, macrorheology, thermogravimetric analysis (TGA), multi-angle light scattering with flow-field flow fractionation (AF4-MALS) and infrared spectroscopy (FTIR) were used for characterization. The theoretical part of this theses submits review of the musculoskeletal system, role of hyaluronic acid in metabolism and summary of synovial liquid. The experimental part focuses on the measurement of the stability and mechanical properties of three artificial samples (first with no modification, second with modified hyaluronic acid and third with modified hyaluronic acid and chondroitin sulphate). These samples were compared with real horse synovial fluid and artificial viscosupplement Orthovisc®.
|
guest ::
