|
|
Apartment house in Šlapanice
Špinar, Adam ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The subject of the Bachelor‘s thesis was to create a project documentation for the construction of the new residential building in Šlapanice with almost zero energy consumption. Object is designed as three-storey house non-basement. The new building is situated on a corner of two streets and is connected to the buildings from the southeast side. On the first floor there are three establishments, technical rooms and garage parking. On the second floor there are four residential units with a terrace. The third floor has three residential units with a balcony. The foundation structure consists of reinforced concrete belts on drilled piles. The construction system is longitudinal, made of large-format lime-sand blocks for machine bricklaying. Ceiling structures are designed as monolithic reinforced concrete. The roof structure is made of prefabricated wooden trusses. Deep foundation is used to obtain thermal energy from the subsoil using a ground-to-water heat pump. The piles are designed to be energy efficient.
|
|
| |
|
|
Building in Vacant Site in Brno
Švajda, Radim ; Kalivoda, Tomáš (referee) ; Kalousek, Lubor (advisor)
The aim of this thesis is to create a multifunctional four-storey building without an attic. This is a free vacant buildings in Brno. The house is designed for residential and Administration. On the ground floor are located shops and offices are located in the 2nd floor only offices and facilities for staff, top two floors are intended only for housing. Vertical support structure is brick Heluz system in combination with monolithic reinforced concrete. The horizontal structure is predominantly made up of reinforced concrete slabs Spiroll. The house is covered with a flat roof.
|
|
|
Block of flats, Brno - Slatina
Přichystal, Jan ; Macků, Michal (referee) ; Müller, Jan (advisor)
In intention of investor is to build on land number 2194/1 single apartment house for 13 families in location Slatina, city Brno. Apartment house is designed as a four-storey building, without basement. Ground plan has the shape of letter T. The maximum dimensions of 16,82 x 30,32 m. The roof is planned single-layer flat roof.The apartment building is designed as a walled insulated. The apartment building created thirteen apartment units.
|
|
|
Office building in Karvina
Bogocz, Adam ; Dohnal, Jakub (referee) ; Fuciman, Ondřej (advisor)
Diplom thesis is about design of an office building. Building floor plan is designed as a rectangle. The building consists of four floors. Roofing the object is solved by a flat roof with strips of m-PVC. The purpose of the internal arrangement is to be able to lease office space to individual firms on the floor. On the first floor is situated an entrance hall with space for the doorman and staircase area. At the hall is also a personal elevator and utility room. These spaces are common to all tenants. In the space for offices are located toilets for women, for men and one toilet for the disabled. Kitchen with lounge and six offices. These spaces are connected with single corridor. The other floors are connected to administrative with hall, which houses a staircase and an elevator. In office spaces 2.NP. 3.NP and 4.NP are located toilets for women, for men and one toilet for the disabled. Kitchen with lounge, utility room and nine offices. These spaces are connected with single corridor. From these levels, there is also access to the evacuation staircase, which is designed according to the requirements for fire protection. On the 4.NP in the utility room is located auditing roof ascent. The project was developed in the educational version of ArchiCAD 17 and processed in accordance with the requirements of a layout, architectural design, structural design, proper and safe use of the building.
|
|
|
Administration building with a library
Jakeš, Václav ; Švehla, Alois (referee) ; Donaťáková, Dagmar (advisor)
The main topic of this thesis is the detailed design of new building in a secluded state administration buildings with a flat roof single shell. The building has two floors and no basement. Structural system used is brick. Vertical structures are made of Porotherm system and horizontal structures are made of monolithic reinforced concrete. The load is transferred to the monolithic strip foundation.
|
|
| |
|
|
Semi-detached house, Brno - Lisen
Žižková, Martina ; Majsniar, Michal (referee) ; Bečkovský, David (advisor)
The objective of the bachelor thesis was to design a semi-detached house where each part of the house is built as a separate dwelling unit. The semi-detached house is located on plots no. 5136/4, 5136/7 and 1395/1, 1395/2 in Brno, district Lisen. The house is free-standing, with no basement and it has two floors. The entrance and access road is located on the eastern side of the property. The supporting construction is designed from the Velox system. The roofing is divided into two aisle roofs with various inclinations. The house offers accommodation for 4-5 family members.
|
|
|
Multifunctional House
Hantscherová, Lucie ; Kňourková, Lucie (referee) ; Čuprová, Danuše (advisor)
This Diploma thesis deals with the topic of multifunctional house. The building is situated on the street Pod Studánkou in Pardubice. This house is brand new building, four-storey, basementless, with a single layered flat roof. Height of the house is 13,580 meters. On the first floor there is technical hinterland and commercial places for a rent. On the second, third and fourth floor there are situated thirteen flats for a living. The foundations of the house are made of concrete C16/20. The bearing walls are made of masonry Porotherm. The external bearing walls are combined with the contact thermal-insulation. Windows and doors are triple glazed with a thermal-insulation.
|
|
|
Mixed-use Building in Ledeč nad Sázavou
Nevím, Tomáš ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The master thesis designs a mixed-use building in Ledeč nad Sázavou. The thesis consists of three parts. First part presents the project documentation of architectural-construction. Second part proposes the technical equipment of the building. Third part is assessment of the designed building by methodology for multicriteria evaluation of buildings SBToolCZ. The building is located in undeveloped and slightly sloping land. The building has three above-ground floors. There are three different operations in the building, which are a café and an electrical shop and an office part. There is a café, an electrical shop, technical and storage facilities on the first floor. The second and third floor is an office part and company apartment. Structurally, the building is solved by a two-wax load bearing system. The building is founded on footing and foundation slab. Load bearing vertical elements are walls, columns and posts. Externall wall is designed from ceramics block with and mineral insulation. Horizontal load-bearing structures are designed as cast-in-place reinforced slabs. The building has a flat roof. In the building is air condition and cooling system and heating. Part of electricity demand is covered by photovoltaics on the roof. All drawings and visualization are designes in software ArchiCAD.
|
guest ::
