|
|
Economic evaluation of wood buildings
Gáliková, Eva ; Aigel, Petr (referee) ; Výskala, Miloslav (advisor)
The bachelor thesis deals with comparison of a timber frame construction and a masonry building in the third and fourth part of building life cycle. Constructions are compared in thermal properties, acoustic properties, fire resistence, lifetime and it’s effect on the environment. Also, the thesis deals with demands on new constructions and it’s demolition involving it’s costs, time demands and it’s masses.
|
|
|
Detached house with photographic studio
Kladiva, František ; Julinová, Patricie (referee) ; Bečkovský, David (advisor)
The subject of this bachelor thesis is a non-detached new building of a family house with a residential attic in the village Bošovice, cadastral area Bošovice. The construction is largely designed as a timber, with a brick garage for two vehicles. The building is divided into a housing section, photo studio and a garage.The wooden structure consists of walls made of wooden frame, filled with thermal insulation and covered with gypsum fiber and cement-fiber boards, the ceilings are made of Posi-Joist beams with blow-in insulation. The wooden structure is built above the crawlspace. The residential part with the photo studio is covered with a gabled roof, the garage is covered with a flat roof. AutoCAD software was used to draw the drawing documentation.
|
|
|
Apartment house
Lauko, Marek ; Šoulová, Eva (referee) ; Utíkalová, Ivana (advisor)
The aim of this bachelor thesis is creation of design documentation for notification of structures said in Paragraph 104 (1) (a - e) of the building act, or for issuing of building permission for apartment building in cadaster unit of city Brno-Bystrc. The building is located on the outskirts of city to be built-up are set for habitation. The chosen parcel of land number 2632/3 is relatively flat. The apartment building will be built in where are the apartment buildings from second half of 20th century are standing. Most of the buildings were modernized lately. The new building is place in the middle of the parcel and won’t intrude original development look. The object is designed as apartment building with seven above – ground floors without cellar. In the building there are 14 apartments, two flats on each floor. Twelve flats are defined for three or four membered families, remaining two flats located on the ground floor are designed as accessible apartment for two people with reduced mobility and orientation. These two flats have reserved parking space in garage. Because it is necessary to have enough parking spaces for whole apartment building there will be create car park with pavement on the parcel. Structural system of the building is wall masonry system made up of clay bricks. Floor structure is designed from large-dimensioned filigree floor slabs because of low time requirement.
|
|
|
Detached house in Libáň
Kubínová, Veronika ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
This bachelors thesis is focused on design of family house in Libáň. It is designed as a detached, two-storey house with cellar under technical part. It will be in service as permanent residence for a family with four members. The roof of the house will be designed as a flat roof with green roof system. Perpendicular constructions are made of Porotherm systems and precast floor slab is made of prestressed concrete floor slab from company Spiroll. The house plan contains also a two-car garage. The project was designed in ArchiCad and 3D model was made in Lumion. All the conctructions are in Czech Technical standarts.
|
|
|
Detached house with hairdresser's saloon in Hořice
Hamplová, Adéla ; Hofman, Petr (referee) ; Struhala, Karel (advisor)
THE SCOPE OF THIS BACHELOR´S THESIS IS A NEW BUILDING OF A HOUSE WITH BUSINESS PREMISES IN HOŘICE. THIS DETACHED HOUSE IS SITUATED ON A SLOPE AND HAS THREE STOREYS. BUSINESS PREMISES ARE IN THE BASAMENT AND HAVE THEIR OWN ENTRANCE. THE OTHER STOREYS MAKE A LIVING AREA. THE BUILDING IS INTENDED FOR PERNAMENT HOUSING OF FOUR PERSONS. EXTERNAL LOADBEARING STRUCTURES ARE MADE OF CLAY BLOCKS. EXTERNAL WALLS IN THE BASEMENT ARE MADE OF CONCRETE BLOCKS. SPIROLL PANELS ARE USED FOR STRUCTURE OF CEILING. ROOFING IS MONO-PITCHED MADE OF TRUSS GIRDERS. THE DESIGN WAS PROCESSED IN 3D PROGRAM ARCHICAD.
|
|
|
Technical Background with Accommodations in Litohoř, Superstructure
Kopečková, Martina ; Řihák, Pavel (referee) ; Šlanhof, Jiří (advisor)
Subject of this bachelor´s thesis is solution of technological phase rough superstructure newly-built technical background with accommodation in Litohoř. This thesis involves engineering report, situation of wider transport relations, site plan drawing, design of the machine´s assembly, technological regulation, control and test plan, safety, time schedule and calculation.
|
|
|
Restoration of masonry building
Hubený, Radim ; Pulec, Vladimír (referee) ; Perla, Jan (advisor)
The final thesis is focused on restoration masonry building. Concretely assessment of resistance joist's floors, design alternative's strengthening and impact of surcharge on pronounces constructions. The choice one of alternatives strengthening, design and check of floor structure over the second floor.
|
|
|
Kindergarten
Přibyl, Jan ; Klubalová, Pavlína (referee) ; Bečkovská, Tereza (advisor)
The subject of this thesis is the documentation for construction of kindergarten in Pacov. The building is designed like two-storey wall system from ceramic hollow blocks and ceiling construction is of prestressed ceiling panels. There are four departments, each for 20 children, social hall, kitchen, technical and administrative facilities. The roof is designed as warm flat roof. The building is equipped with ventilated facade from colored aluminum fins. To ensure a healthy environment is designed mechanical ventilation.
|
|
|
Fire station
Wrana, Lukáš ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The subject of this thesis is to create a project documentation of the design of new construction of fire station in Šumperk. The fire station is designed according to ČSN 73 5710 as a C type station that will be used by professional fire brigade of Olomouc district. The object is structurally divided into two parts - a masonry building, and a reinforced concrete frame. The administrative part of the building together with the base of the fire brigade, technical room, and a fire tower are designed as a masonry building made of Ytong cellular concrete units. One of the parts is designed as a two-level object, while the technical room and the fire tower are designed as a sigle-level object. The circumferential masonry is insulated by contact thermal insulation system. The floor construction is made of Spiroll prestressed floor slabs. The roof is designed as a warm flat roof. The garage is a single-level building with built-in structure of storerooms in part of the garage. The precast reinforced concrete frame is set on foundation pads and foundation sills. The horizontal and vertical supporting structure consists of reinforced concrete parts – columns, Spiroll floor slabs, floor girders, sway frames, purlins and small purlins. The whole object is covered by a warm flat roof. The external cladding consists of PUR isolating sanwich panels.
|
|
|
Kindergarten school
Muňko, Matej ; Hudec, Mojmír (referee) ; Sedlák, Jiří (advisor)
The subject of this work is new building of a kindergarten in Brno, district Brno – Slatina. The aim of this work is to create documentation for realization of the building of the kindergarten with all-day operation, with projected capacity of 60 children divided into three classes. Object is situated in calm, suburb part of the city. The terrain is flat. Object has two overground floors, is without basement and has a single-layer flat roof. Building is founded on foundation strips from plain concrete. The masonry of the building is from ceramic blocks from the Heluz system. The ceiling is made from ceramic-concrete ceiling beams with Miako filling blocks and from prefabricated prestressed concrete ceiling panels Spiroll.
|
guest ::
