Národní úložiště šedé literatury Nalezeno 2 záznamů.  Hledání trvalo 0.00 vteřin. 
Pizúrová, Naděžda ; Hlaváček, A. ; Kavčiaková, Zuzana ; Roupcová, Pavla ; Kuběna, Ivo ; Buršík, Jiří ; Sokovnin, S. Y.
Cerium oxide nanoparticles (nanoceria) are currently one of the most investigated nanomaterials because of their attractive properties used in biomedical applications, catalysis, fuel cells, and many others. These attractive properties are connected with the Ce3+ and Ce4+ valency state ratio. In the nanoparticle form, cerium oxides contain a mixture of Ce3+ and Ce4+ on the nanoparticle surfaces. Switching between these two states requires oxygen vacancies. Therefore, nanoceria's inherent ability to act as an antioxidant in an environmentally-dependent manner and a “redox switch” to confer auto-regenerating capabilities by automatically shifting between Ce4+ and Ce3+ oxidation states is significantly affected by surface morphology. Regarding this demanded behavior, we aimed to characterize synthesized nanoparticle surface quality and its influence on the cerium oxidation states. The received results were used to evaluate the synthesis method's suitability for suggested utilization. We used nanoparticles prepared by electron beam evaporation. This unique physical method includes nanoparticle creation through the fast cooling process followed by breaking radiation damaging nanoparticle surfaces to create surface off-stoichiometry. We prepared a sample containing clusters of a mixture of ultra-small nanoparticles and approximately 100 nm particles. X-ray diffraction confirmed the CeO2 phase in both components. To extract the finest component, we used centrifugal size fractionation. We received 200 nm clusters of 2-10 nm nanoparticles. Nanoparticle shapes and facet types were analyzed using transmission electron microscopy methods. We found out most nanoparticles were formed with truncated octahedrons containing {1,1,1} and {1,0,0} facet types and truncated cuboctahedrons containing {1,1,1}, {1,0,0}, and additional {1,1,0} facets. No octahedron (without truncation) containing only {1,1,1} facets was observed. Nanoparticle shapes containing {1,1,0} and {1,0,0} are suitable for redox activity. Some amount of irregular shapes, beneficial for redox activity, was also observed. Spectroscopy methods confirmed Ce3+ content.
Polsterová, S. ; Všianská, Monika ; Friák, Martin ; Pizúrová, Naděžda ; Sokovnin, S. ; Šob, Mojmír
Motivated by our experimental research related to silver nanoparticles with various morphologies, we have employed quantum-mechanical calculations to provide our experiments with theoretical insight. We have computed properties of a 181-atom decahedral silver nanoparticle and two types of internal extended defects, -5(210) grain boundaries (GBs) and quadruple junctions (QJs) of these GBs. We have employed a supercell approach with periodic boundary conditions. Regarding the thermodynamic stability of the decahedral nanoparticle, its energy is higher than that of a defect-free face-centered cubic (fcc) Ag by 0.34 eV/atom. As far as the -5(210) GB is concerned, its energy amounts to 0.7 J/m2 and we predict that the studied GBs would locally expand the volume of the lattice. Importantly, the system with GBs is found rather close to the limit of mechanical stability. In particular, the computed value of the shear-related elastic constant C66 is as low as 9.4 GPa with the zero/negative value representing a mechanically unstable system. We thus predict that the -5(210) GBs may be prone to failure due to specific shearing deformation modes. The studied GBs have also the value of Poisson’s ratio for some loading directions close to zero. Next, we compare our results related solely to -5(210) GBs with those of a system where multiple intersecting -5(210) GBs form a network of quadruple junctions. The value of the critical elastic constant C66 is higher in this case, 13 GPa, and the mechanical stability is, therefore, better in the system with QJs.

Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.