National Repository of Grey Literature 106 records found  beginprevious97 - 106  jump to record: Search took 0.01 seconds. 
SCADA/HMI systems in process control
Sobotka, Lubomír ; Máša, Vítězslav (referee) ; Chlápek, Petr (advisor)
The aim of the bachelor thesis is to make sommary basic principles of automatic control in process and power industry and describe chosen software, which is used in process and power industry. This thesis describes basic problems of automatic control and is engaged in theory of making vizualization screen and software know as SCADA/HMI.
Development of UHV STM/AFM
Pavelec, Jiří ; Neuman, Jan (referee) ; Kalousek, Radek (advisor)
The main focus of the thesis is on the actuator, which is used for nanopositioning of laser beam in-site AFM (Atomic Force Microscopy). The appropriate shape of supply pulse and frequencies were searched and optimized. They make slip-stick motion of the piezo actuator. Possibilities of solving troubles with UHV (Ultra High Vacuum) are described on the basis of experiment and simulation.
Wire Electrode DBD Actuator
Procházka, Pavel P. ; Uruba, Václav ; Šonský, Jiří
The new actuator working on DBD principle is presented. Results on both electrical characteristics and resulting flow ar show.
Experimental investigation of synthetic jet array
Dančová, Petra ; Vít, Tomáš ; Kotek, M.
Paper deals on an experimental investigation of a synthetic jet array. This investigation focuses on a partial problem of the general task “a synthetic jet array interacting with a channel flow”. The experiments have been performed with water as a working fluid using hot-wire anemometry, laser Doppler vibrometry and particle image velocimetry methods.
Frekvenční charakteristika generátoru anulárního syntetizovaného proudu s velkým vnitřním průměrem
Krejčí, A. Petr ; Trávníček, Zdeněk ; Tesař, Václav ; Kordík, Jozef ; Pavelka, Miroslav
An annular synthetic jet actuator of large inner/outer diameter ratio of the nozzle has been developed, and four variants were designed, manufactured, and tested. The resonance frequency was estimated theoretically, based on the mechanical energy balance, and then measured by the pneumometric method. The resultant value was found to be 40 Hz. The nozzle geometry effect on the resonance frequency and on the velocity was quantified; both effects were concluded to be surprisingly small, less than 5%.
Provozní parametry a charakteristiky aktuátorů s dilatačním prvkem
Doležel, Ivo ; Karban, P. ; Ulrych, B. ; Barglik, J. ; Pantelyat, M. ; Matyukhin, Y. ; Gontarowskiy, P.
In specific applications one needs actuators characterized by very high forces at small shifts. As actuators of classical constructions mostly cannot satisfy these requirements, the authors designed another arrangement with an inductively heated dilatation element. But huge mechanical strains and stresses of thermoelastic origin acting in its structural parts could lead to its damage or destruction. The paper deals with mathematical modeling of the device that is solved numerically in the combined formulation (while the electromagnetic field is solved independently, the thermal and thermoelastic effects are solved in the hard-coupled formulation). The algorithm is illustrated on a typical example whose results are discussed.
Temperature correction for a hot wire concentration measurements in a gas mixture
Mazur, Oton ; Jonáš, Pavel ; Uruba, Václav
The method of simultaneous flow velocity and concentration measurement by means of a constant temperature anemometer with two parallel hot wires probe in a binary gas mixture has been recently described. A special attention is paid to temperature calibration of the probe.
On Physics of a Synthetic Jet
Uruba, Václav
Velocity field of a synthetic jet has been investigated experimentally. The synthetic jet is generated by electro-dynamical system designed for control of free shear layer. To catch unsteady periodical structures the phase average method is applied to time series of instantaneous velocities.
Syntetizovaný proud - návrh generátoru a ověření jeho funkce
Trávníček, Zdeněk ; Vít, T. ; de Boer, P. ; Maršík, František
A zero-net-mass-flux actuator was designed, and a synthesis of an air jet was investigated. The operating parameters were suggested near the resonance frequency. The proper actuation was experimentally tested by smoke visualization and hot-wire anemometry. Two typical synthetic jets are presented, namely the so-called "long" and "short" extruded fluid column cases. The maxima of the centerline local and the time-mean velocities reached approximately 27 m/s and 8.7 m/s, respectively.
Návrh generátoru syntetizovaného paprsku
Uruba, Václav
A coupled fluid-structural model of a synthetic jet actuator is introduced. Sensitivity analysis to various actuator design parameters is presented.

National Repository of Grey Literature : 106 records found   beginprevious97 - 106  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.