|
|
Thin layers TiO2 prepared by electrochemical way
Janov, Pavel ; Zatloukal, Miroslav (referee) ; Sedlaříková, Marie (advisor)
This work deals with issue of preparation active electrochromic film of titanium dioxide and intercalation properties. By electrodeposition was created active film on glass substrates covered with transparent conductive thin-film In2O3:Sn (ITO). The active films prepared by electrolytic way were compared with active films prepared by vacuum methods. Then has been studied theirs electrode properties in electrolytes containing lithium.
|
|
|
Electrodeposition of thin layers TiO2
Jakubis, Ivan ; Vondrák, Jiří (referee) ; Sedlaříková, Marie (advisor)
This work deals with issues of electrochromism and making active electrochromic film of titanium dioxide. By using various precursors consisting titanium element active film was electrodeposited on glass substrates covered with transparent conductive thin-film In2O3:Sn (ITO). Electrochromic characteristics of these substrates that were electrodeposited for different times and with different voltage have been studied. Than there has been studied the impact of various annealing temperatures on electrochromic characteristics.
|
|
|
Surface treatment of aluminum alloys
Petr, Jiří ; Konečný, Tomáš (referee) ; Zmrzlý, Martin (advisor)
The thesis is focused on the surface treatment used for the preparation of aluminium alloys for the adhesive bonding. The theoretical part can be divided into three chapters. The first of them deals with aluminium alloys, the second one speaks about the adhesive bonding. The surface treatment itself, especially the conversion coating issues, is discussed in the last chapter. The experimental part is focused on the optimalization of a two-step titanium and zirconium based conversion coating technology. In the first part, the aluminium alloy is analysed by the glow discharge optical emission spectroscopy. The second part of the experiment deals with the first step of the technology, acidic deoxidation. The objective was to examine the influence of the exposure time on the morphology of the alloy surface and the shear strength of adhesive joints. In the last part of the experiment, the conversion coatings are prepared and characterised by the scanning electron microscopy and energy dispersive spectroscopy.
|
|
|
Reaction synthesis of bulk intermetallic materials in Ti Ni system form kinetic spraying deposits
Dyčka, Martin ; Moravčík, Igor (referee) ; Jan, Vít (advisor)
Bachelor’s thesis deals with intermetallic compounds which are formed in nickel-titanium binary system. The theoretical part of this thesis deals with the best known titanium based intermetallics, diffusion and possible processing technologies of intermetallic materials. In experimental part, a nickel-titanium coating created by cold spray technique was used. The changes in microstructure depending on annealing temperature were analysed. The results contain photographs of microstructure and fractures, values of microhardness and results of chemical analyses.
|
|
|
Biocompatible titanium alloys and theirs application
Hofírek, Michal ; Kohout, Jan (referee) ; Věchet, Stanislav (advisor)
This thesis presents use of titanium alloys in medical applications in form of literature research. In first part the basic properties of titanium as element are discussed as well as its behavior in alloys. Next part focuses on proper explanation of term biocompatibility and sums up specific requirements for alloys used in orthopaedic applications. These properties are shown on alloy Ti-6Al-4V ELI and other selected titanium based alloys which are currently being developed.
|
|
|
Applications of titanium alloys
Košťál, Jan ; Kaštyl, Jaroslav (referee) ; Němec, Karel (advisor)
This bachelor thesis will deal with titanium and titanium alloys, their properties and appropriate application in mechanical engineering and other branches. The first part is devoted to the pure titanium, describes technology of production, there are also briefly mentioned physical, chemical and mechanical properties, and according to them the position of titanium among other elements. The main part is focused on the different types of titanium alloys, their properties, production and processing. The conclusion is devoted to the use of pure titanium and its alloys in different industries.
|
|
|
Stress-strain analysis of skull implant
Hřičiště, Michal ; Borák, Libor (referee) ; Marcián, Petr (advisor)
Lebeční implantáty se používají jako náhrady částí lebečních kosti, které v důsledku zranění nebo nemoci ztratili svou funkci. Důležitým faktorem, který ovlivňuje funkci celé soustavy implantátu, jsou jeho mechanické projevy. Tato práce stručně shrnuje současné znalosti v oblasti rekonstrukce lebečních defektů a popisuje srovnání různých tvarů stěn implantátu vytvořených z různých materiálů, na základě deformační napěťové analýzy modelu neurocrania s umístěným implantátem, zatíženým nitrolebečním tlakem a vnějším zatížením.
|
|
| |
|
|
Machining of titanium alloys
Kinc, Jiří ; Humár, Anton (referee) ; Píška, Miroslav (advisor)
This thesis describe titanium and titanium alloys from the perspective of charakter, production and use. Thesis gives information about difficulty connected with machining titanium by basic machining methods. Titanium alloy Ti6A14V was turned in practical part. Intention was to measure cutting force and specific cutting force.
|
|
|
Titanium, Alloys and Intermetallics for Biological and Industrial Applications
Vespalec, Vítězslav ; Jech, David (referee) ; Čelko, Ladislav (advisor)
The creation of this Bachelor´s thesis was performed as a search retrieval, which includes basic information about titanium and its alloys. In the first chapter is stated history of titanium manufacturing. Following chapter include the most important property of pure titanium, such as alotropic modifications of the crystal grid, chemical, physical and technological characteristics, there is also space, that is assigned for using contemporary division of titanium alloys, detrimental effect of impurity, shape memory effect and intermetallics instance. Third part concern about selected application in industry. The conclusion pursue about biocompatibility factor and possibility use titanium and its alloys in implantology and dental applications.
|
guest ::
