|
Industrial cooling systems
Doležal, Jan ; Horák, Petr (referee) ; Formánek, Marian (advisor)
This thesis describes the design of cooling ice rink. Cooling system design is based on a physical nature, measured data and observations from practice. The result is a proposal cooling system with the highest possible cooling factor, which uses waste heat for technology needs snow pit and hot water, in order to achieve the lowest cost of operation ice rink.
|
|
Warm air heating and cooling the house
Rodková, Daniela ; Kašpar, Antonín (referee) ; Šikula, Ondřej (advisor)
This bachelor thesis deals with the inner climate optimalization of one - family house to which is associated private swimming - pool hall. In the one - family house there is designed air conditioning for hygienical air exchange, coller system for thermal stress removal during summer period and for heat losses coverage during winter period. In the private swimming - pool hall there is designed air conditioning for dehumidification and warm air heating of the hall. In addiction, there is designed floor heating in selected rooms.The source of heat for floor heating and TV heating - up is solved by new technology, which is, compared to classical boilers, environmentally friendly due to lowering CO2 emissions.
|
|
Air conditioning in the theater
Lenhart, Marek ; Vlček, Petr (referee) ; Blasinski, Petr (advisor)
The Bachelor’s dissertation is divided into three parts: theoretical, computational and design. The theoretical part is focused on heat recovery systems in air condition. The computational and project part deal with the design of air ventilation, heating and air conditioning theater.
|
|
Ventilation Control Unit with Radio Time Synchronization
Barták, Jiří ; Šimek, Václav (referee) ; Tříska, Vít (advisor)
Project's primary objective was to create ventialtion control unit, which synchronizes its time through radio signal. Delivering power into fans is based on dew points calculated from data obtained on both sides of circumferential wall. The most important parts of this unit are microcontroller MC9S08DZ60, sensor SHT11 and DCF77 receiver. There is SD card socket on the inner printed circuit board for data recording purposes. I am working with the card on file system layer. The control unit uses USB socked as well to be able to communicate with PC. I have decomposed firmware of control unit into small modules at the start of development. Those modules are: MCU to MCU communication, USB communication, measuring temperature and relative humidity using SHT11 and extracting time information from DCF77 signal, all written in C. After these modules were tested, i have put them together. I have also written a PC application in Java. It is used to communicate with control unit and to process recorded data. Benefits of the control unit cannot be evaluated without long-term observation.
|
|
Design and optimization of the control valve for EHRS exchanger
Rada, Jakub ; Svída, David (referee) ; Beran, Martin (advisor)
This diploma thesis deals with the design and optimization of the control valve for EHRS exchanger. The first part of the thesis contains a research describing the historical development of internal combustion engines, their impact on the environment and especially the possible ways of waste heat recovery. The second part focuses on the design of the control valve and experimental measurement to verify its functionality. The final part contains an analysis of pressure losses of the designed valve to improve its construction disadvantages.
|
|
Renewal energy in HPV
Bittner, Ivo ; Vorel, Pavel (referee) ; Kaplan, Zdeněk (advisor)
This thesis deals with comprehensive study and design of recovery system of a road vehicle powered by human power. It contains an overview of different types of heat recovery devices, their characteristics, advantages, disadvantages and applicability in the construction of such a vehicle.
|
|
Renewal energy in HPV
Bittner, Ivo ; Kloss, Ondřej (referee) ; Kaplan, Zdeněk (advisor)
This thesis deals with comprehensive study and design of recovery system of a road vehicle powered by human power. It contains an overview of different types of heat recovery devices, their characteristics, advantages, disadvantages and applicability in the construction of such a vehicle.
|
|
Hydromobil - design of mechanical-hydraulic recovery of car kinetic energy
Stodolák, Michal ; Robenek, Dětřich (referee) ; Nevrlý, Josef (advisor)
This diploma thesis deals with the structural design of a vehicle powered by pressure fluid that is stored in a hydraulic-pneumatic accumulator. The first part described the types of energy recovery, especially hydraulic recovery. Furthermore there are outlined basic parameters of the design of the vehicle driving mechanism. The second part describes the design of hydromobile with emphasis on the chassis, especially the driving and braking system. Additional information on the individual parts of the chassis, that are put through the stress analysis. The final part deals with the actual manufacturing of the hydromobile and is followed by the resume of the thesis.
|
|
Test bench for analysis of energy recovery in experimental vehicle
Indruch, Jiří ; Čermák, Jan (referee) ; Nevrlý, Josef (advisor)
The diploma thesis deals with design of an experimental test bench for recovery energy simulation at machines with hydrostatic energy transmission. This work describes choice of connection and selection of hydrostatic and other components. A first part of the thesis deals with calculation and design of the flywheel whose is its rotational kinetic energy corresponds in a certain scale to translational kinetic energy of the experimental vehicle. The thesis outlines the efficiency of transformation of rotational kinetic energy to pressure energy its accumulation and subsequent conversion back to rotational kinetic energy. Precise determination of the effectiveness of hydrostatic recovery is one of the objectives of experiments that will be implemented at the test bench. The task of the measurement and physical-technical analysis to be conducted at the manufactured test bench is primarily to obtain data at for the precise control of the hydrostatic energy recovery system to maximize its efficiency.
|
|
Heat and mass balance of up-to-date laundry premise
Galčáková, Alena ; Kšenzuliak, Vladimír (referee) ; Bobák, Petr (advisor)
This diploma thesis is solving a problem of energy intensity evaluation of professional laundry process. It presents computational model of tumble dryer and calender. There are described factors in calender model, which influence energy intensity of drying process. Verification of the model has been done according to measured data from real professional laundry premise.
|