|
|
Compact datalogger with flash memory
Vágner, Martin ; Hynčica, Ondřej (referee) ; Bradáč, Zdeněk (advisor)
This thesis deals with design of small datalogger with flash memory card. At first are discussed parameters, functions and features of dataloggers. The second part deals with a problem of digital measurement of analog signals. The rest of this thesis gives attention to main goal which is design of datalogger. It consists of circuit diagram, layout of printed circuit board, firmware for microcomputer and software for PC.
|
|
|
System for Precise Measurement of Electrical Length of Coaxial Cables
Podr, Michal ; Polívka,, Milan (referee) ; Šebesta, Jiří (advisor)
This thesis describes a study of the measuring methods determining the electrical length of coaxial cable without using a vector network analyzer. First, a general theory of management and its various parameters is briefly discussed. This section is focused more specifically on the coaxial cable and its parameters. The next part is graphically analyzed process considerations in the design of measurement methods and outlined the block structure of the system. The third section describes the working process, prototype testing of the bridge, its measurement and design of the measuring system. In the fourth part the software is described. In conclusion, the results of the work are discussed, accuracy of the measurement system, the obtained parameters chosen with regard to the principle of the measurement system and the overall evaluation of the applicability in practice.
|
|
|
FM receiver and radio data system processing using FPGA
Petr, Ondřej ; Pirochta, Ondřej (referee) ; Maršálek, Roman (advisor)
This term paper is the second part of the dissertation FM RDS signal processing using FPGAs. In the first half of the work is processed the information needed before the actual design and implementation. These can be divided into three themes. The first theme is the received signal VHF / FM + RDS, the second one handles the problem of software radio and last topic concerns FPGAs. The second half deals with the solution implementation and receiver radio VHF / FM and bitrate optional RDS to digital form and its implementation on FPGA. This section also includes the measurement of results.
|
|
|
Digital AM / FM transmitter
Kováč, Marek ; Strašil, Ivo (referee) ; Pavelka, Ondřej (advisor)
This master thesis is focused on the theoretical description and practical implementation of software defined transmitter. The main aim of this thesis was made the prototype of software defined transmitter in FM band. Theoretical part is determined to description of basic parts of equipment and working principles to understand the basic principle of digital transmitters and define the appropriate component base for construction. Discussed are used types of A/D and D/A converters, blocks of digital signal processing and the roles, which these components performs. The second part is focused practical. Specified are suitable types of components and block diagram is proposed for following electrical connection and printed circuit board in Eagle program as a plug-in modul for developmental platform Arduino. The main point is program, which sets and controls the transmitter. Next important part is impedance match and antenna tuning, which is explain in practical part of thesis. The result is prototype of software defined transmitter compatible with Arduino Uno platform.
|
|
|
Front end for software receiver
Slezák, Jakub ; Horský, Pavel (referee) ; Šrámek, Petr (advisor)
This thesis deals with a theoretical analysis of the basic parameters of receivers, input circuit architecture and signal digitization. According to the specified assignment it is outlined block scheme of front end for software receiver with specified components and the total bilance is calculated. Individual parts of the system are designed and realized. This is a set of four input filters for bandwidths: short waves up to 30 MHz, 87,5-108 MHz, 144-148 MHz and 174-230 MHz. The main point of design is a circuit containing a low-noise amplifiers, switches, and two amplifiers with adjustable amplification. Mainly are used integrated circuits from Analog Devices corporation. To control the various switches and adjustable amplifiers was designed a separate panel, which is connected to the main circuit via a cable. In the last phase was the whole system and its components subjected to measurements. Thanks to a number of mounted SMA connectors it is possible to measure different parts of the system and we are able to modify it partially.
|
|
|
Adaptable video A/D converter
Maňas, Stanislav ; Hála, Ondřej (referee) ; Říčný, Václav (advisor)
Master's Thesis deals with the complete proposal of light adaptability A/D converter. In the second chapter there are describes types of sensors. Third one describes the most used methods of light adaptability. In the fourth chapter there is describe the adaptability A/D conversion. Chapter 5 describes the block diagram. In the sixth chapter there is the design of all blocks of A/D converter. Finally in the chapter 7 there are construction documents for realization.
|
|
|
Multifunction board computer for motorcycles
Netáhlo, Tomáš ; Tošovský, Petr (referee) ; Brančík, Lubomír (advisor)
Master’s thesis deals with a design and a realization of multifunction board computer for motorcycles. The goal of the device is measuring speed, rotation speed of engine, temperature of ambient, temperature of engine, temperature in intake including signalization of overvoltage and hightemperature. The device is completed by above standard function such as measuring titl of motorcycle, climbing of route, route recording and data transmission to the computer. The thesis includes a complete solution of hardware and software part of the device.
|
|
|
Analog-Digital Converter Unit with Data Output by Serial Line
Lecián, Petr ; Frýza, Tomáš (referee) ; Jakubová, Ivana (advisor)
This work is about measuring voltage and manipulating with this way obtained data. Manipulating system is in this case 16-bit microcontroler PIC by Microchip, that transforms input data to output using known non-linear trace. Microcontroler has been programed in the symbolic adress language. I had to create a unit that would be a part of the special device for indirect measuring non-electric quantity. Output data should be sent to the superior system by serial bus RS-232 for a next use.
|
|
|
Ambulant Cardiac Monitor
Vaníček, Aleš ; Strašil, Ivo (referee) ; Číž, Radim (advisor)
This thesis describes the design and practical realization of a prototype mobile, battery-powered device that is able to periodically recording electrocardiogram and fotopletysmogram or blood pressure. Data from these periodic scanning is processed by microcontroller and stored on a memory card which is part of the proposed device. The device can be connected to a PC via USB like a virtual serial port.
|
|
|
Universal Microcontroller Unit
Kulenda, Vít ; Hynčica, Ondřej (referee) ; Kučera, Pavel (advisor)
Master’s thesis contains description parameters of microcontroller ATMEGA644P, also contains differences between older and newer version of microcontrollers ATMEGA644 and ATMEGA644PA. Inside structure of microcontroller, memories and peripherals are described here. The construction of the universal microcontroller unit is main target of this thesis. The unit contains supply, A/D converter, current loop, communication interfaces, temperature sensor, accelerometer and other. The unit collects and saves data, communicates by interfaces and manages other functions. Using devices and circuits are described in this thesis. Development of software for microcontroller(firmware) are positioned to last part of this thesis. This software control functions of all parts positioned on the unit.
|
guest ::
