|
| |
|
|
Proposal for Waste Elimanation in the Ferrite Cores Production
Janec, Jiří ; Pavelka, Tomáš (referee) ; Videcká, Zdeňka (advisor)
The topic of this thesis is to optimize the production process of ferrite cores in the company Epcos, Ltd. The work is divided into theoretical, analytical and design part. The first part of the thesis contains theoretical knowledge within the field of lean manufacturing, process mapping and mapping value streams. Based on these findings is determined the theoretical basis for the processing of other parts of the thesis. The aim of the analytical part of the analysis is to map the current state of the manufacturing process, finding bottlenecks, evaluating the results of analysis of the current state, which will be used for the design part of the thesis, to develop proposals for optimizing production bottlenecks and evaluate their contribution.
|
|
|
Benefits of Product Manufacturing Optimalization
Vémola, Martin ; Pišoft, Martin (referee) ; Jurová, Marie (advisor)
This thesis deals with the optimalization of production of the thermostat bulb K22 in Invensys Appliance Šternberk Ltd. company. It analyzes the manufacturing process and proposes its optimal solutions. This thesis also describes other possible solutions that contribute to efficient management of the lean enterprise. The main benefit of this thesis is in the reduction of required labor time for the manufacture of the thermostat and in the introduction of lean management of selected tools.
|
|
|
The Organizational Structure of Assembly Lines Change
Rajtrová, Gabriela ; Petričič, Ilja (referee) ; Němeček, Petr (advisor)
The main goal of this diploma thesis is new lay – out of organizational structure of assembly lines, which is leading to the material flow shortening and elimination of problems with factionalism of industrial process. In this thesis is introduce the company, where is proposed new organizational structure of assembly lines, together with description of deficiencies current organization. The good know ledges of assembly process and technology is important for the right modification. According theoretic findings it was proposed new organizational structure of assembly lines and the cost saving was calculated
|
|
|
Toyota Production System method in the production of switchboards
Němeček, Jakub ; Fiala, Alois (referee) ; Kotek, Luboš (advisor)
This bachelor thesis is focused on the methods of the Toyota Production System, used in the company ABB Ltd. PPHV Brno - Slatina. The theoretical part describes the different kinds of waste, methods for identifying waste, and the methods used to eliminate this waste and thereby improve and streamline the entire production process. Then follows the practical part, dealing with a specific situation where some of these methods are applied in practice.
|
|
| |
|
|
Implementation of lean management techniques based on the analysis of bottlenecks in selected company
Tůmová, Romana ; Zelená, Veronika (advisor) ; Váchová, Lucie (referee)
The aim of thesis is implemention the chosen techniques of lean management in the company named European Trailer Systems Ltd. based on the identification of bottlenecks. The theoretical part provides basic definitions of bottleneck, Theory of Constraints, Lean management and selected methods of lean management. The practical part begins with the company's European Trailer Systems s.r.o characteristic while describe the current situation. Furthermore, the practical part will focus on the identification of bottlenecks that occur in company European Trailer Systems Ltd. in the production process of sliding roofs, will be followed by a proposal to eliminate found bottlenecks with using methods of lean management and possibly their implementation.
|
|
|
Application of the Lean Office methodology in the Football Industry
Pylypchuk, Oleg ; Martínez, Felipe (advisor) ; Mejdrech, Vlastimil (referee)
Abstract This Master´s Thesis focuses on the analysis of the business processes within the football clubs, especially the Liverpool FC. The aim of the thesis is to analyze the processes within the football club and to propose the way how to improve them by using the Lean Office methodology There are prerequisits that a vast amount of the processes are not being performed well in the Football Industry. That is why this topic should be very actual for this industry. The basic theoretical aspects of the Lean Office had been described in the thesis, as well as the aproach how to map the process and exact tools had also been described. Then the business process of acquiring of a new player is analyzed and the possible solution how to improve it is proposed. Those ideas have to be drivers for the ongoing improvement for the industry by implementing the Lean philisophy throughout it.
|
|
|
Streamlining Production Processes in the TCPA Welding Shop
Vejvodová, Veronika ; Martínez, Felipe (advisor) ; Pivodová, Pavlína (referee)
The thesis deals with approaches to improving processes and with application of one to a selected production process. Currently, streamlining processes is of interest to many companies, not only manufacturing ones. The relevance of the topic is also evidenced by the number of publications devoted to this very issue. The aim of the thesis is to propose improvements in manufacturing processes in the welding shop through Jiskuhen activities used in Toyota Peugeot Citroën Automobile Czech s.r.o. The first part of the thesis defines terms related to processes and their management, followed by description of some of the widely used improvement approaches and their basic assumptions. The other part of the thesis focuses on the description of Jishuken activities and their subsequent practical application within the company. The thesis offers concrete proposals for improving processes and also recommendations for the management of these activities. This thesis demonstrates the philosophy of continuous improvement in the company, which serves as a reference point for other companies in the area of streamlining of processes.
|
|
|
The possibilities of implementation of selected elements of the Japanese business philosophy to the particular company
Milaberská, Lenka ; Zelená, Veronika (advisor) ; Váchová, Lucie (referee)
This bachelor thesis is focused on an introduction of the theory of lean management as a tool, which is able to reduce waste at the particular workplace in Aspera Technology company. The first part of this thesis pays attention to presentation of lean management, familiarization with its history and description of appropriate methods. The main part consists of implementation of the method called 5S which was evaluated as the most appropriate method of lean management regarding waste reduction in the given company. The 5S method was established to the particular workplace at the beginning of the varnishing process. The description of the workplace before implementation of the 5S method is provided and relevant changes are highlighted in the thesis. In conclusion, achieved improvements are mentioned while the most important one is the waste reduction.
|
guest ::
