|
|
Preparation and organization of the production area's construction facility
Řeháček, Martin ; Stehlíková, Jana (referee) ; Vlčková, Jitka Laura (advisor)
This master’s thesis relate to the preparation and organization of the production area’s construction of the SPEDUR company in Žďár nad Sázavou. The thesis contents technical report on the construction technological project, construction site, time plans, project of the equipment site, draft of the mechanisms, control and testing plan, environmental plan, risks of safety and health at work and calculation for this construction.
|
|
|
Production of branded clothing in Brno
Pavlas, Antonín ; Obrtlík,, Jan (referee) ; Májek, Jan (advisor) ; Utíkalová, Ivana (advisor)
The bachelor’s thesis aimed to create the necessary levels of project documentation – Documentation for building permission and Documentation for construction. The content of the project is a new construction of the production of branded clothing in Brno by the company Glami, which will serve primarily as the production and export of finished pieces ready for sale. The building is located in Brno-Bohunice district between Kamenice, Kejbaly and Vinohrady streets and the plat is listed as one of the Brno brownfields under number 0101. The solution should také into account changes to the Urban Plan of the City of Brno in 2021 and the surrounding buildings. One of the first goals was for the construction to complement and complete the surrounding road structure. The basic masses were situated so as to respect the road lines and thus match the surrounding roads. The building is divided into three masses separated by their functions, but interconnected for easy operation. The aim was to create a functioning building with optically separated but interconnected operations.
|
|
|
Construction Project - Implementation of Administrative Building for Ray Service, a.s. in Staré Město
Seménka, Petr ; Diaz, Yvetta (referee) ; Nečasová, Barbora (advisor)
The content of this thesis is a construction technology project of a new office and production building for company Ray Service a.s. in Staré Město near Uherské Hradiště. The thesis contains technical reports, construction technology study, design of transport ways, technological regulations of demolition and earthworks and regulations for construction of foundation structures. Furthermore is made design of the main machine assembly, inspection and test plan and the design of the construction site, including a technical report. Finally is made a project for the construction of area roads including time plan, LEED certification, noise study and comparison of the main lifting mechanisms.
|
|
|
Manufacturing of ready-to-wear clothes
Dubanych, Yuliia ; Suchánek,, Petr (referee) ; Nový, Alois (advisor) ; Bečkovská, Tereza (advisor)
The aim of the bachelor thesis was to design a new outfit for the Tommy Helfieger brand. The project is based on an architectural study, which was prepared within the subject AG034 Studio of Architectural Creation in the 3rd year study of bachelor. The land that was reserved for the design is located in Brno, in the cadastral area of Bohunice. It is a part of the city that is known for its dominance - the university campus of Masaryk University and other public buildings: the University Hospital, the Faculty of Sports Studies at MU, the Department of Infectious Diseases and the Brno Remand Prison. The plot is located on the border of the zone with the civic amenities and residential area. The land is registered as a brownfield and is connected to Kamenice and Vinohrady streets. The plot is in a moderately sloping terrain. The designed object with its shape follows the trapezoidal shape of the reserved land. The building consists of two buildings: the main building and the building, designed to house auxiliary operations. In the main building there is an entrance area, administration, facilities, changing rooms and sanitary facilities for employees, a dining room and warehouses. It is followed by a communication core with two freight elevators and a staircase. The third mass of the main building is reserved for production activities, storage areas, a rest room, a fire station and other auxiliary operations. Although the building is an industrial building, it does not have a clear industrial character. The facade is made of white plaster, which contrasts with the large areas of the windows in the production hall. An important element of this is also the outdoor space to relax at the entrance. The entrance to the building is barrier-free.
|
|
|
Tropical Solar Freezer
Trčálková, Miroslava ; Suchánek,, Petr (referee) ; Nový, Alois (advisor) ; Donaťáková, Dagmar (advisor)
The aim of this study was to design a tropical solar freezer, which would be entirely self-sufficient. The requirement was to install solar freezer to developing countries with insufficient technical infrastructure. The construction of solar freezer is located near Lake Victoria, in a town called Kisumu, Kenya in Africa. The main idea was to create a simple look that matches the use of the building. My suggestion was to create two separate buildings. The first is a small object, serving as a gatehouse. The second object is a large U-shaped, in which there are all the necessary facilities for the operation of freezer and facilities for staff. The supporting system consists of cast-in-place reinforced concrete columns. Solar panels located on the roof of freezers protect the building from direct sunlight. Diagonal steel rods fitted on the east and west facades constitute a significant feature of the building.
|
|
|
Structural assessment of the existing reinforced-concrete frame structure of the production building
Pražan, Jiří ; Krůpa, Pavel (referee) ; Girgle, František (advisor)
The diploma thesis deals with the structural assessment of the existing reinforced concrete frame structure of the production building. The structure under consideration is carried out as a reinforced concrete monolithic frame structure with a discrepancy of 6,15 x 6,15 m (axis). The object has a rectangular plan of 13 x 9 fields. The total dimension is 56 x 81m and is divided into three dilation units on all floors by two inserted 3,65 m wide fields. The building has three above-ground floors and one underground floor. The construction height of the basement is 3,675 m, above ground level 4,0 m. On the west side of the building (axis A) are three reinforced concrete elevator shafts with a dimension of approximately 4,5 x 3,8 m. The envelope and inner partitions are made of bricks full of burned. The work shall include a static assessment of the status quo, a determination of the load capacity and a proposal for appropriate adjustments to ensure static reliability.
|
|
|
Family winery Plchut Mutěnice
Smržová, Tereza ; Bílek, Zdeněk (referee) ; Dýr, Petr (advisor)
The topic of this bachelor thesis is the design of a new family winery Plchut in Mutěnice. The design is based on the project developed in the course Architectural design 2 (AG032). The building is located on a plot of land on the north-western edge of the municipality of Mutěnice, on Vinařská street. The area is a well-known wine-growing region and a frequent destination for wine tourism. Above the mentioned land are situated vineyards. The land itself is sloping, the slope rises gently from the south-east to the north-west side. The surrounding buildings are mostly wineries. The type of soil is arable land. It is a grassed area without building and trees. Bellow the land is a road, railway and a cycle path. The building consists of two parts. The public or also social part serves mainly for the visitors of the winery, i.e., for tasting and buying wines. The apartments for visitors, administration and facilities for the winery staff are also situated here. The second part of the building is the production part used for the processing of grapes and wine production. These two parts contrast with each other in shape and facade. The production part has only a simple cuboid shape with a wooden cladding facade. This part only has one floor with a flat green roof. The main intention for the production part was a simple layout that will connect the individual rooms according to their purposes. The rooms are therefore arranged in the same order as the wine production progresses. The public part has two floors and has a gable roof with a pitch of 34°, which is approximately the optimum pitch typical of rural buildings. The facade of this part is made up of facade plaster, which should on the surface resemble concrete. The front of the building is glazed. Part of the gable is paneled with burnt wood. The back side is also paneled with burnt wood. The shapes and facades of both parts are intended to represent their function and by whom they will be used. The winery part is therefore designed as a simple shape, as it essentially is a production building. On the other hand, wine production is linked to nature, so the building is complemented by a natural element - wooden paneling. On the contrary, the public part uses a gable roof as a typical element of rural buildings, as it is a representative part of the whole building. However, as this is a space where visitors from cities will come to buy and taste the local wine, the facade of this section is intended to represent urban life - with a facade imitating concrete.
|
|
|
Production of branded clothing in Brno
Pavlas, Antonín ; Obrtlík,, Jan (referee) ; Májek, Jan (advisor) ; Utíkalová, Ivana (advisor)
The bachelor’s thesis aimed to create the necessary levels of project documentation – Documentation for building permission and Documentation for construction. The content of the project is a new construction of the production of branded clothing in Brno by the company Glami, which will serve primarily as the production and export of finished pieces ready for sale. The building is located in Brno-Bohunice district between Kamenice, Kejbaly and Vinohrady streets and the plat is listed as one of the Brno brownfields under number 0101. The solution should také into account changes to the Urban Plan of the City of Brno in 2021 and the surrounding buildings. One of the first goals was for the construction to complement and complete the surrounding road structure. The basic masses were situated so as to respect the road lines and thus match the surrounding roads. The building is divided into three masses separated by their functions, but interconnected for easy operation. The aim was to create a functioning building with optically separated but interconnected operations.
|
|
|
Production of aquariums in Brno
Molčanová, Viktorie ; Obrtlík,, Jan (referee) ; Májek, Jan (advisor) ; Bečkovský, David (advisor)
The aim of the bachelor’s thesis was to develop project documentation for the study of aquariums production for the company called Akvária Pavlica, which was developed within the subject AG035 Studio of Architectural Creation - Production Buildings, in the 3rd year of the bachelor’s study. Due to its business successes, the company needed to build new production capacities and decided to locate the new headquarters in Brno, in the cadastral area of Horní Heršpice, where the surrounding buildings on the south side consist mainly of indoor industrial buildings. The bachelor thesis contains documentation for building permits and implementation documentation. The land is registered as a brownfield, is intended for industrial production, and is connected to Sokolova Street. It is a slightly sloping terrain falling to the north. A part of the former Elplast’s factory building is still situated in the south, which, however, will be demolished. The new building consists of four units. The first consists of an exhibition space and an entrance hall, which is followed by another part with facilities for employees and administration. The third is a carpentry with some storage facilities and technical facilities. The fourth and the largest part represents the production hall. There is an exterior staircase and a barrier-free ramp in front of the entrance from Sokolova Street. There is also a parking lot around the building, paved areas for handling truck vehicles, paved areas for pedestrians and new greenery.
|
|
|
Manufacturing of ready-to-wear clothes
Dubanych, Yuliia ; Suchánek,, Petr (referee) ; Nový, Alois (advisor) ; Bečkovská, Tereza (advisor)
The aim of the bachelor thesis was to design a new outfit for the Tommy Helfieger brand. The project is based on an architectural study, which was prepared within the subject AG034 Studio of Architectural Creation in the 3rd year study of bachelor. The land that was reserved for the design is located in Brno, in the cadastral area of Bohunice. It is a part of the city that is known for its dominance - the university campus of Masaryk University and other public buildings: the University Hospital, the Faculty of Sports Studies at MU, the Department of Infectious Diseases and the Brno Remand Prison. The plot is located on the border of the zone with the civic amenities and residential area. The land is registered as a brownfield and is connected to Kamenice and Vinohrady streets. The plot is in a moderately sloping terrain. The designed object with its shape follows the trapezoidal shape of the reserved land. The building consists of two buildings: the main building and the building, designed to house auxiliary operations. In the main building there is an entrance area, administration, facilities, changing rooms and sanitary facilities for employees, a dining room and warehouses. It is followed by a communication core with two freight elevators and a staircase. The third mass of the main building is reserved for production activities, storage areas, a rest room, a fire station and other auxiliary operations. Although the building is an industrial building, it does not have a clear industrial character. The facade is made of white plaster, which contrasts with the large areas of the windows in the production hall. An important element of this is also the outdoor space to relax at the entrance. The entrance to the building is barrier-free.
|
guest ::
