|
FEM model and simulation of induction motor with pole-changing winding
Záškodný, Jiří ; Ondrůšek, Čestmír (referee) ; Vítek, Ondřej (advisor)
This master thesis deals with calculations and simulations of multi-speed induction motors. In the first part, basic principle of these machines is described. Next, there are given three examples of pole-changing stator windings and their properties are analyzed (winding factors, magnetomotive force). Main part includes simulations and measuring of the specific motor, which is produced by company Siemens Mohelnice. This is the motor with 2/1 pole-changing in Y/YY connection. First, influence of skewed rotor slots on current and torque is analyzed. Next, parametres of motor from simulations are given and these results are compared to measured values.
|
|
Wireless Communication in Home Automation
Prokop, Michal ; Gutman, Jiří (referee) ; Hynčica, Ondřej (advisor)
This bachelor thesis is about how to make wireless communication network by IQRF technology which is intended for a home automation. It’s created by using DPA custom handler. This network can be made without programming thanks to DPA custom handler. This wireless network is realized by light model that is controlled by coordinator or by a button on a node. After that I measured latency and energy consumption on several various synchronous network and asynchronous network.
|
|
Modeling of torque-speed characteristics of induction motor
Michalík, Marek ; Chrobák, Petr (referee) ; Vítek, Ondřej (advisor)
This master thesis deals in first part with basic theory of an induction motor and principle of function. It also includes theory about higher harmonics of magnetic field and how asynchronous and synchronous torques are created. Various ways how to decrease effect of these torques are suggested. These findings are later applied in practical analytical calculation in second part, in which all parameters of motor are calculated from given dimensions of motor from technical documentation. This is done for basic and higher harmonics. After that a model of this motor was created in RMxprt program, which also calculated all parameters of this motor and created torque characteristic. This motor was also modelled in ANSYS Maxwell 2D. Additional simulations for finding out influence of harmonics on torque characteristic were also done in this software. Torque characteristic of motor was also practically measured in laboratory. All results were compared and evaluated.
|
|
Converters controling
Nevoral, Jiří ; Steinbauer, Miloslav (referee) ; Fiala, Pavel (advisor)
Bachelor´s project is study of DSP microprocessor problems to converters controlling with asynchronous motors and execution of a project. Study includes information on quality single type processor, benefits and disadvantage whole solving. Of purpose is DSP converters control with DMC1500.
|
|
Calculation of parameters of small induction motor
Vojče, Zbyněk ; Cipín, Radoslav (referee) ; Vítek, Ondřej (advisor)
This bachelor thesis deals in the first part with a construction and a principle of function of an induction motor. In the second part deals with an actual analytical calculation of three-phase low power induction motor. Is performed a simulation in a program Ansoft RMxprt, which calculated the characreristics of the motor analytically and simulation in program Maxwell 2D by finite element method. The aim of the work is to compare results of simulations with results of analytical calculation.
|
|
Design of high-speed induction motor
Svoreň, Jan ; Ondrůšek, Čestmír (referee) ; Vítek, Ondřej (advisor)
This work deal with troubleshooting of problem parts of high-speed induction machines. Introduction is about conception of induction machines with reference to construction specialities due to high rpm and because machines are fed by inverter. Next part is focused to design problems. A classical induction machine was measured to determination change of various losses in classic and high-speed induction machines. The computation of laboratory sample high-speed motor was specified for calculation of effective resistance and leakage reactance of solid-steel rotor with copper layer. The results of numerical calculation were validated by using finite elements method and machine design was adjusted for improving operation characteristic.
|
|
Control of excitation of synchronous generator
Horník, Vincenc ; Červinka, Dalibor (referee) ; Huták, Petr (advisor)
The main focus of the work is to create the optimal design of the reconstruction of synchronous generator excitation system of small hydro power plants with regard to the economical and technical performance, description of synchronous generator excitation, possible technical solutions to the reconstruction of excitation systems and their driving.
|
|
Design of a high-speed electrical machine.
Šolc, Martin ; Klíma, Jiří (referee) ; Mach, Martin (advisor)
This diploma thesis is dedicated to design of highspeed induction motor with power 30 kW, 60 000 rpm. In the beginning of the thesis basic problematic of highspeed motors, used materials and motor types is discussed. The practical part of the thesis concerns design of the motor itself, creating a model in ANSYS Maxwell software, performing several simulations and optimalization of the designed machine. In the last parf of this thesis each simulation is evaluated and the final model of the machine is introduced.
|
|
Design and measurement of a small induction motor
Fišer, Jan ; Klíma, Jiří (referee) ; Mach, Martin (advisor)
This bachelor thesis deals with design and measurement of a small induction motor. The introduction describes a structure and an operating principle of the induction motor. The following part deals with analytical calculation of three-phase induction motor‘s properties. Next are executed an analytical calculations and a finite element method calculations by the Maxwell software. In the end are these calculations compared with results from measurement.
|
| |