|
|
Class D audio amplifier for active loudspeakers
Cupák, Jan ; Punčochář, Josef (referee) ; Kratochvíl, Tomáš (advisor)
This master's thesis deals with design of D class audio final amplifier, which was output power 400 W for 4 ? load impedance. Designed audio amplifier is specifical for active speaker, which consists of satelite speakers and subwoofer. Further more it deals also with other functional blocks, e.g. balanced input preamplifier, active crossover and protection for safety running. Outcome of this work are schemes of each functional blocks of D class audio amplifier, whose functionality was verified by simulation. Thesis also contains full reference material including mechanical arrangement of functional blocks on printed connection board. The conclusion contains the measured parameters of function blocks of produced prototype and complete photographic documentation.
|
|
|
The inverter for arc-welding
Vaculík, Josef ; Klíma, Bohumil (referee) ; Červinka, Dalibor (advisor)
This diplom thesis theoretically deals about principle of pulse welding current source. Work explains operation principle of the single acting transmit converter used in realized construction and mention the others examples of converters types. Goal of the work is design individual parts of source : input filter, pulse transformer, output inductor and power semiconductors components. Thesis also contains description of the regulation circuitry of the converter, auxiliary power supply and pre-driver for power transistors. If everything will be all right prototype of the source will be assembled and measured. Results will be compared with theoretical assumptions.
|
|
|
The inverter based battery charger
Kadlec, Josef ; Pazdera, Ivo (referee) ; Červinka, Dalibor (advisor)
The aim of this master’s thesis is provide detailed information about car battery’s charger with a switching power supply. The kind of this power supply is one-pulsed conducting inverter with transformer. The charger’s rates of nominal voltage are 6 and 12 V. The method of charging is charging by constantly voltage with a current limitation. The values of a current limitations are 0.5A, 5A and 20A. The charger’s maximal current is 50A. This current can help to the accumulator with starting of a vehicle. This device is equipped by indicators which indicate the end of charging.
|
|
|
Design of evaluation network for in-vehicle networking communication chips
Kupčík, Ondřej ; Kovář, Jan (referee) ; Kolka, Zdeněk (advisor)
Cílem této diplomové práce bylo navrhnout moduly určené k demonstraci a testování některých obvodů, používaných v automobilové technice. Jedná se o LIN transceiver NCV7420 a osmivýstupový výkonový budič AMIS-39101. Návrh spočíval ve vybrání a popisu parametrů vhodných podpůrných obvodů, vytvoření celkového schématu a navržení desky plošných spojů tohoto modulu s ohledem na kompaktní rozměry a předpokládané testy. Dalším krokem byla tvorba firmware řídicího mikrokontroléru (C8051F344), jež zajišťuje LIN komunikaci, řízení budiče a základní monitorovací funkce. Poslední část popisuje software pro hostitelský PC umožňující komfortní řízení sítě složené z těchto modulů. Pro úplnost byl tento projekt doplněn o přehled vlastností sběrnice LIN a metodiky testování LIN transceiveru z hlediska funkčních parametrů i některých EMC měření. V příloha obsahuje kompletní schéma modulu, výkresy desek plošných spojů, seznam řídicích příkazů a fotografie modulu.
|
|
|
Back-up power supply 230V/50Hz/300VA with a battery supply 12V
Snítilý, David ; Patočka, Miroslav (referee) ; Vorel, Pavel (advisor)
The aim of this project is to describe, design and create a converter from 12V DC to 230 VRMS. The power of this device is about 500W. The device consists of two main converters. The first one is step-up DC/DC converter and the other is DC/AC inverter. Step-up converter is designed as a resonant converter. It is useful for pushing down losses in semiconductors and inceasing efficiency. The inverter is changing DC voltage from the first converter to AC voltage. Control of this device is realized with DSP Motorola. This device should be used mainly for supply common devices up to 500W. Main usage is planed in a car or to another place where is not posible to connect some device to plug.
|
|
|
Industrial state indicator
Růžička, Zdenek ; Štohl, Radek (referee) ; Bradáč, Zdeněk (advisor)
Diploma work deals with industrial display systems, indicators and their proposal. These systems are used everywhere that is necessary to mediate transmission of information. Own proposal of indicator is very specific and depends on given application and used display. In practice there is possible to use a few types of displays but in this diploma work there are used only sedmisegmental and matrix. Common component of proposal is microcontroller. No less significat and important part of the proposal is a choice of interface and communication protocol. The correct choice of hardware that is completed with software we will obtain complete status indicator.
|
|
|
Semiconductor laser driver for 1Gbit/s
Chlachula, Filip ; Křivák, Petr (referee) ; Prokeš, Aleš (advisor)
This master´s thesis deals with a solution of the driving circuits of semiconductor laser. In the beginning of the thesis there is an analysis of semiconductor lasers and its characteristics. Then the principle of laser diodes and its excitation is described. This thesis is focused on semiconductor laser excitation through the use of direct and modulating current. Several circuits are described, designed and simulated. The best resulting circuit is realized and measured in the laboratory.
|
|
|
Research in the preparation of self-leveling anhydrite screeds
Běťák, Rostislav ; Smetanová,, Lenka (referee) ; Gazdič, Dominik (advisor)
Bachelor´s thesis extends the existing results in the field of research of an anhydrite binder and it is divided into two sections. The theoretical section is focused on general sulphate binders and anhydrite binders. Further it contains the description of the technology of floor screed application, demands of norms and comparison of screeds, which are used nowadays. The experimantal section concrens with the research and the development of an anhydrite binder and mainly the utilization of this binder in the field of cast self-leveling floor screeds. For the preparation of self-leveling mixtures were used two different types of anhydrite and theirs main features were compared.
|
|
|
Research in the field of preparation of anhydrite binders
Hanáček, Jan ; Dvořák, Karel (referee) ; Gazdič, Dominik (advisor)
The presented bachelor´s work deals with a research and development of sulphate binders on a base of anhydrite with focus on its potential usage in the industrial production of dry mortar mixtures. Within the scope of this work a mineralogical analysis of two industry gypsum was performed as well as an assessment of technological attributes while hydrating a laboratory burnt anhydrite II.
|
|
|
Study of anhydrite binder
Břicháčková, Jana ; Fridrichová,, Marcela (referee) ; Gazdič, Dominik (advisor)
The present work deals with research in the preparation of sulphate anhydrite binders based. It is conceptually divided into a general theory of sulphate anhydrite binders and binders, focusing in particular anhydrite cast floors, as well as search anhydrite binders of research training at the Institute of THD and study requirements for screed materials, with emphasis on anhydrite screed mix.
|
guest ::
