|
|
The efficiency of heat distribution
Vích, Pavel ; Horák, Petr (referee) ; Počinková, Marcela (advisor)
This diploma thesis focuses on the analysis of heat loss of heating distribution in the industrial area. The aim of this labor is to determine heat loss heat distribution kept in non manholed canal and evaluate economic return to build a local source of heat for the office building. For this building is in two variants resolve the reconstruction of the existing heating system. For the first variant is designed the local gas condensing boiler and for second variant existing central heat source. The experimental part of this labor compares the measured and calculated values of boundary conditions of hot-water pipes kept in non manholed canal.
|
|
|
Energy storage in Building services systems
Bílek, Martin ; Počinková, Marcela (referee) ; Horák, Petr (advisor)
The subject of this thesis is energy storage systems in building services. In the first part the theoretical acquaintance with the nature of energy storage. In the second part has two variants preparation hot water in an apartment building. In the third part of the test solution storage tank of hot water. Development of computational algorithms, comparison of calculation used and the final summary.
|
|
|
Polyfunctional Building
Holub, Ondřej ; Kopřivík, František (referee) ; Košíčková, Ivana (advisor)
Diploma Thesis „Polyfunctional building“. The work deals implementation project of polyfunctional building in Jihlava. Object is situated on Jihlava suburb in emerging part called „Horní Kosov“. Land is gently sloping from west to east. It continues for Buková street. The building has six floors and a basement. The basement is made from monolithic reinforced concrete. It is used as garages. Floors are made of ceramic bricks with isolation . First floor contains four commercial premises and main entry for housing part. Seventeen flats are situated from second to sixth floor. Sizes of apartments are 1+kitchen corner to 4+kitchen corner with terraces and balcony. Roofing is solved with simple flat roof. Heating will be ensured with central heating. Every apartment, commercial premises, shared premises are going to have it’s own gas boiler. Polyfunctional building is connected on a local road – Buková street, which is connected to new communication. Within multifunctional building twenty parking slots is designed at the basement. Next fourteen parking slots is designed outside.
|
|
|
Fluid power heating system
Paták, Jiří ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
The theoretical part deal with problematic of fluid power heating system. The experimental part deal with measurement of the characteristic of circulation pump and measurement of valves - ball valve. The project solves the heating and hot water preparing for the new administrative building in Žďár nad Sázavou. The building has 3 floors. As a source of heat for the winter season is designed gas boiler, for hot water preparing is also used the same gas boiler. The heat source is placed in a separately accessible room.
|
|
|
Apartment hotel
Prívara, Marek ; Mátl, Miroslav (referee) ; Hlaváček, Pavel (advisor)
The subject of this thesis was to develop project documentation for building construction. It is a new four-storey house with restaurant, situated on the outskirts of the village Bridges at Jablunkova. The building is brick, has a two-level gable and shed roof, consisting of wood roof system. Slope of the parcel on which the house is located, allows the building of the plant into the ground. Because of this it is possible to enter it, either the main entrance to the first floor or building around and over the summer terrace come directly to the restaurant on the second floor. Above it are two more floors for hotel guests only, a total of 10 accommodation units with its own bathroom.
|
|
|
The savings in heating buildings
Rokůsek, Petr ; Hořínková, Lucie (referee) ; Počinková, Marcela (advisor)
This thesis theoretically in Part A deals with the solution in savings heating building and heating hot water. It examines the impact of austerity measures on the overall need for and consumption of heat energy and its economic impact and compared with each other in order to achieve maximum efficiency. Part B is their subsequent application to a given object - a residental building, various design alternatives and the resulting energy savings improvements. Experimental Part C deals with indirect measurement of the thermal conductivity of building materials.
|
|
|
Project of Autonomous Heating Source
Pejcl, Jiří ; Ptáček, Michal (referee) ; Radil, Lukáš (advisor)
The diploma thesis deals with design of a suitable heat source for heating and hot water. There are dealt with operational costs of different types of heat sources, which are compared with one another. The next part is the implementation of specific proposal of the heat source - heat pump ground/water with deep wells and measuring system. The last part describes measuring several operating modes of the heat pump.
|
|
| |
|
|
Domestic gas boilers
Haluza, Jakub ; Fiedler, Jan (referee) ; Pospíšil, Jiří (advisor)
The aim of this bachelor thesis is to compile the summary of domestic gas boilers, their structure, performance and controls. Then to elaborate the technical-economic comparison of below named methods of heating for the concrete object.
|
|
|
Heating of the logistics center
Spurný, David ; Blasinski, Petr (referee) ; Počinková, Marcela (advisor)
The aim of this bachelor thesis is to draw up a project of heating of a logistics centre in Brno. The thesis is divided into two parts. The first theoretical part is dedicated to a description of particular heat sources and the second analytical part to a development of a heating system design for the given premises. The building analysis and the heat loss draft will serve as the initial information for the project completion.
|
guest ::
