|
|
Construction Project for Implementation of Industrial Hall in Hodějice
Koudelková, Anna ; Venkrbec, Václav (referee) ; Nečasová, Barbora (advisor)
The final thesis is focused on construction of the complex Milmar s.r.o. company, specifically, it focuses on the construction technology project of the SO02 Production Hall building. Diploma thesis detail solved through technological regulations prefabricated reinforced concrete skeleton construction of the hall and then implement concrete floors with infill. For the construction of the hall, an itemized budget was prepared with a statement of area, time schedule, health and safety plan, design of construction supply and assessment of transport routes, the main construction mechanisms were selected and variants of the main construction mechanisms, control and test plans were assessed. An accompanying and technical report, a construction technology study, and the sustainability certification of the LEED 2009 system were prepared for the entire construction. The text and drawing part was prepared according to the assignment of the diploma thesis.
|
|
|
Construction-technological project of production hall with extension in Polička
Holubář, Zdeněk ; Průcha, Aleš (referee) ; Vlčková, Jitka Laura (advisor)
This diploma thesis is dealing with a construction-technological project of a production hall in Polička. The main subject of the thesis is a technological report, a realization study of the main technological phases, a coordination situation of the construction with broader relations to transport routes, a project of the office building site equipment, a suggested list of the main construction vehicles, a time plan for the main building object, technological prescriptions for a prefabricated skeleton and bored piles and documents related to this.
|
|
|
Production Hall in Černá Hora – Selected Parts of Construction-technological Project
Různar, Daniel ; Štěpán, Richard (referee) ; Motyčka, Vít (advisor)
The topic of my master's thesis are selected parts of the construction technology project Production Hall in Černá Hora with administrative part. Thesis contains engineering report, construction budget, time schedule for the whole construction, deployment of mechanisms and staff, project of construction site, study of the implementation of the main technological stages, the most appropriate construction mechanisms, routes of mechanisms, ranges and travels of mechanisms, financial and time schedule of the main building, technological specification for established pilots and montages of prefabricated skeleton, control and test plan, implementation of pilots, proposals of design of movement mechanisms, comparison of cladding of ventilated facades, skeleton assembly procedure diagrams and noise study of the construction site.
|
|
|
Manufacturing of designer made clothes
Maršálek, Filip ; Suchánek,, Petr (referee) ; Nový, Alois (advisor) ; Donaťáková, Dagmar (advisor)
The bachelor thesis deals with an architektural study of design studio of subject AG034 which was concentrated on production buildings topic. Target of this bachelor thesis is construction and design and functionaliti of production of branded clothing. The land which we want to build on is situated near by the Rokytova street in district of Brno-Židenice. In near surroundings are located for example city barracks industry buildings and warehouses or city cemetery. Location of whole building on the land is solved by placeing it in the centre of the plot because of its big dimensions. Local roads then simply surrounds the building from each side. Task of intended production building is create enough employment opportunities for local residents and finally to raise morale and level of local enviroment. The building is created in good technical solution for handicapped people and their job opportuniti. Concept of the building and whole production is primarily based on functional aspect. The building has got two aboveground storeys and her length is several times bigger then her width and height. The building plot rises between the southern and northern borders somewhere about twelve metres. Proposal and the total concept is based on this fact and manufacturing delivery is directly on the second floor where the production hall is located. On the second floor there is also a technical and storage part. The first floor is conected to the second by one employee staircase and the second which is determinated for public visit of the showroom on the second floor. The clothing showroom is set to the balcony and to the production itself. The first floor is designed as a five-stroke and contains every background for building and staff. For example there are staff changing rooms and offices and dining room with kitchen or buffet but also else technical background.
|
|
|
Aquaria Production Popovice
Kozubíková, Aneta ; Štikar, Jaroslav (referee) ; Nový, Alois (advisor) ; Donaťáková, Dagmar (advisor)
The aim of this bachelor thesis it to design a new building for manufacturing aquariums. This project is based on a study which was made in subject named AG032. Popovice is located in Zlínský region in Uherské Hradiště district. The building plot is located outside of the living area of Popovice and it’s near of a very busy road - E50. Form of the building works on the shape of the building plot which is very limiting. It’s relatively narrow and on the north part it has a protective zone from railway track. Visually, the building can be divided to three parts which have different height – administration with production, showroom and joinery. The look of the building is really simple. Conceptually the building is based on long shape of a production and administration part and walk-through entrance hall. This divides employees and people who are visiting this area. The long look is multiplied by strip windows and cantilever part of the 2nd floor. Showroom and the joinery copy the shape of this plot and use the maximum area of it – one of the perimeter walls is parallel with border of the plot. The primary task of the design is to create an area where everything is well connected and collision-free. This building has no cellar and on the south side it has two storey. Structural system of the showroom is made from masonry system. The rest of the building is made from reinforced concrete skeletal structure – the part for administration is from cast-in-place concrete and the other part is prefabricated.
|
|
|
Construction-technological project of the building in the area of Rotana
Kadlec, Michal ; Brandtner, Michal (referee) ; Vlčková, Jitka Laura (advisor)
The aim of the diploma thesis is to process a construction-technological project of the building in the area Rotana. The aim of the thesis is to propose a suitable implementation procedure of the building. The thesis deals with the time schedule of the main object, itemized budget, major building machines and mechanisms, project of site equipment, study of the main construction phase realization, plan for securing material resources, technical report, time and financial object plan. The thesis also focused on the comparison bracing of foundation with the slopes.
|
|
|
Construction-technological project of the production hall in Bystřice nad Pernštejnem
Fňukal, Radek ; Diaz, Yvetta (referee) ; Vlčková, Jitka Laura (advisor)
This diploma thesis is dealing with a construction-technological project of a production hall in Bystřice nad Pernštejnem. The main subject of the thesis is a technological report, a realization study of the main technological phases, a coordination situation of the construction with broader relations to transport routes, a project of the office building site equipment, a suggested list of the main construction vehicles, a time plan for the main building objects, technological prescriptions for a prefabricated skeleton and bored piles and documents related to this.
|
|
|
Office building with production hall
Břečka, Jan ; Balázs, Ivan (referee) ; Horáček, Martin (advisor)
The aim of this diploma´s thesis is to design steel-concrete structure of the office building and steel structure of production hall situated in Moravské Budějovice. The dimensions of the office building are 48,0 x 60,0 meters and height is 17,0 meters. The main constructional material is S 255 steel and C30/37 concrete. The load bearing structure of the hall consists of the columns, primary and secondary beams. The axial distance of columns is 6 meters (5 meters). The dimensions of the production hall are 24,0 x 60,0 meters and height is 12,0 meters. Inside the production hall is craneway. An analysis of two solutions of the supporting structure was performed. The first variant is consists of rigid frames. Truss girder in the second variant is an alternative solution. Both variants were compared and the amount of steel was found. The selected option was developed in greater details with static calculation, drawings and material report. The static analysis of the main load bearing parts of the structure is processed. The calcuation were made in accordance with the European design codes.
|
|
|
Manufacturing facility in Písek u Jablunkova - realization of rough top structure
Labaj, Ondřej ; Diaz, Yvetta (referee) ; Vlčková, Jitka Laura (advisor)
The bachelor thesis deals with the realization of the rough top structure of the manufacturing facility for the company Olzanka s.r.o. This work deals with the walling of the building, realization of the semi-mounted ceiling structure and roof truss with tin roofing. For these processes, technological regulations were drafted, machine assemblies were designed, an item budget was drawn up together with a bill of quantities. In addition, an OHS regulation, a control and test plan for the walling process, a time schedule, traffic relations and site equipment drawings were developed.
|
|
|
Válka Winery Nosislav
Zifčáková, Tatiana ; Myslín,, Jiří (referee) ; Boleslavská, Yvona (advisor) ; Kalousek, Miloš (advisor)
The subject of this thesis is the design of a newly built (reconstruction) Winery Válka in Nosislav. The project is based on a research carried out during the summer semester 2017 in the AG033 Architecture Design Studio III. – Production facilities class. The plot is situated on a sloping area with an elevation of approximately 6.5 meters. It consists of 2 parts. The bottom part of the plot is 98.8 meters long delimited by Kroužek Street and Masarykova Street.The upper, shorter part of the plot is 32.4 meters long and is delimited by Masarykova Street and Nivka Street. Currently there is the investor’s private house, a private house on Masarykova Street, wine production machinery spaces, and dilapidated objects. Surrounding area mainly consists of two-storey private houses with saddle roofs and street-oriented ledges. The basic idea of the design was a preservation of the private house on Kroužek street based on the investor’s request. Seasonal winery with a partially covered public seating area is designed next to the private house. Wine production hall is situated approximately in the middle of the bottom plot, to ensure a separation of the public and the production area. To avoid a massive look of the space it is divided into smaller areas based on its function. Followingly, the connection between public and production area is created. A facade is made of Siberian larch boards in a combination with a white plaster. The boards are also used for the hall’s roof. As the wood will age the winery will gain a specific character. Windows and doors are dark gray colour made of aluminium. For the private house on Masarykova street disposition changes are designed, including new roofs, holes filling, and facade. The purpose was for the building not to invade the classical village area. Dilapidated objects lie in the upper part of the given plot, therefore 2 new buildings were designed – tourist motel and a tasting room that are connected with the cellar. The motel’s fac
|
guest ::
