|
|
Industrial programmer Atmel AVR microcontrollers
Gryžboň, Jan ; Hanák, Pavel (referee) ; Pavelka, Ondřej (advisor)
The aim of this thesis is to design and implement an industrial programmer AVR microcontrollers from Atmel. The first section provides the theoretical knowledge of the AVR microcontroller. Furthermore, comparison of methods for programming the microcontroller and the selected method is an analysis of the speed of programming. The following is the entire design of industrial programmer which is implemented in the programming environment Eagle. In the penultimate part of the proposal is designed PCB. The final section is devoted to the revival of the programmer and programming.
|
|
|
Multifunction board computer for motorcycles
Netáhlo, Tomáš ; Tošovský, Petr (referee) ; Brančík, Lubomír (advisor)
Master’s thesis deals with a design and a realization of multifunction board computer for motorcycles. The goal of the device is measuring speed, rotation speed of engine, temperature of ambient, temperature of engine, temperature in intake including signalization of overvoltage and hightemperature. The device is completed by above standard function such as measuring titl of motorcycle, climbing of route, route recording and data transmission to the computer. The thesis includes a complete solution of hardware and software part of the device.
|
|
|
Ambulant Cardiac Monitor
Vaníček, Aleš ; Strašil, Ivo (referee) ; Číž, Radim (advisor)
This thesis describes the design and practical realization of a prototype mobile, battery-powered device that is able to periodically recording electrocardiogram and fotopletysmogram or blood pressure. Data from these periodic scanning is processed by microcontroller and stored on a memory card which is part of the proposed device. The device can be connected to a PC via USB like a virtual serial port.
|
|
|
Multiple-funktion steering wheel Formule Student
Paulus, Luboš ; Štohl, Radek (referee) ; Havlíková, Marie (advisor)
The Master‘s thesis deals with a creating of display writers on multiple-function steering wheel Formule Student. It is mainly about dates transfered through RS232 or CAN bus from control unit of the Formule to microcontroller. First of all it is necessary to find out, which informations and a which way of displaying them are more useful and readable for drivers. This leads to another point - right choice of display writers, which will be used on the steering wheel. Creation of the design and construction of display device follows.
|
|
|
RFID acces system realization
Buchal, Adam ; Matyáš, Pavel (referee) ; Marada, Tomáš (advisor)
This bachelor thesis deals with the use of RFID technology in access control systems in intelligent buildings. The study also describes the principle functions of RFID readers and the list of frequencies at which the technology works. The next section is dedicated to the design of the access system with iClass R10 operating at a frequency of 13.56 MHz, the whole system is controlled by a microprocessor ATmega8. The board design is described program for creating electronic schematics EAGLE. The try-out functionality and basic programming functions used kit EVB 4.3 The last section describes the procedure for the production of printed circuit boards photo path including drawings and schemes and also describes the program controlling the entire device using the block diagram.
|
|
|
Design of control board for autonomous mobile robot.
Mašek, Petr ; Marada, Tomáš (referee) ; Věchet, Stanislav (advisor)
This bachelor's thesis deals with design and realization of the control board, that enables the control of an autonomous mobile robot. Simultaneously it deals with possible control alternatives of the similar robots concerning the construction. The outcome of this thesis is the control board, that communicates with the computer via the Bluetooth technology. The position of the robot is controlled via two differential drives and few infrared sensors are used to collision avoidance. The board is composed of standard parts available.
|
|
|
Rotation Electric Actuator: parameter estimation and control
Palaj, Lukas ; Houfek, Lubomír (referee) ; Grepl, Robert (advisor)
The bachelor’s thesis deals with design of printed circuit board in the first part. The board will be used for connecting rotation electric actuator (REA) to the card MF624. It is written about electronic throttle and it’s particular parts, it’s connection to the card and estimation of parameters necessary for composing a virtual model in Simulink in the second part. After that control for the model is designed.
|
|
|
Association of Czechoslovak Eagle from the beginning of the 20th century until the Second World War, in particular in South bohemian Třeboň and Jindřichův Hradec.
PFEIFEROVÁ, Mária
The thesis deals with investigation of activities of Catholic sports association Czechoslovak Eagle from the beginning of the century to the Second World War. It describes its history and explains its most important activity with reference to the activities in South Bohemia, in particular in Jindřichův Hradec and Třeboň. It explains the aims of its work as well as the historical value with reference to particular examples. Its how is the main meaning in connection of spirituality and materialism. The first part describes the history of Czechoslovak Eagle, its foundation, organization, and, its most interesting historical moments. The second part describes its activities in the region of South Bohemia. The third part sets the Eagle's work in Třeboň into the historical context. The fourth does the same with the Eagle's work in Jindřichův Hradec.
|
|
|
Design and implementation of modules for teaching and developing applications with microcontroller Atmel AVR
LANGMAJER, Miroslav
This thesis is based on the design and production of teaching kits with expansion modules which are based on the Atmel AVR microcontroller. Kit consists of a plate containing processes and basic power modules directly on the board and expansion modules "SIMAČ". "SIMAČ" modules are virtual elements that simulate the real elements and they are commonly used in industrial automation. Because of their cost they are integrated in extension kit as programmable modules. It also contains basic theoretical information about working with ATMEL AVR microcontrollers. Expansion modules with module development board and disc which will be loaded all the schemes, programs and technical documentation for individual districts will be attached to the thesis.
|
|
|
Educastion kit for working with microcontrolers AVR Atmel
KUBEŠ, Miroslav
This thesis deals with design and production of teaching kits with Atmel AVR microcontroller. This kit includes a processor board and modules, which will connect to the board. It describes the equipment needed for software design and programming of microcontroller and technological processes to create a kit. Also, it will find the basic theoretical knowledge to work with the ATmega8535 microcontroller. Kit along with a disc on which are recorded all the diagrams, pictures and programs created by me, will be attached to the thesis.
|
guest ::
