|
|
Business Centre
Dežerická, Lucia ; Pešek, Ondřej (referee) ; Pilgr, Milan (advisor)
This diploma thesis deals with the design and assessment of the two different variants of the steel structure of the business centre. The building is situated in Uherské Hradiště. The construction has several floors and the ground floor in the 1st floor is 32 x 32 m, it gradually extends evenly up in 2nd floor and 5th floor, to the total ground plan dimensions of 48 x 48 m. The building has 8 floors and its maximum construction height is 40 m. The supporting system of the structure is designed from S 355 steel, it consists of steel-concrete beams, dies and columns.
|
|
|
Business Centre
Hándlová, Barbora ; Balázs, Ivan (referee) ; Pilgr, Milan (advisor)
The diploma thesis deals with design of steel structure of shopping centre, which is located in Zlín. The total ground plan‘s dimensions of the structure are 153 x 49 m. The maximum height of the building is 23,1 m. The structure of the shopping centre is formed by columns, primary and secondary beams. Floor structure is designed as composite steel and concrete structure. The roof structure, above the central part of the buildig is designed in two alternative versions. There is prepared statics calculation of the main load-bearing parts of the structure, including joints and details.
|
|
|
Glazier's Hall
Kelar, Petr ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
The bachelor's thesis deal with structural design of Glazier's hall. Dimension of the hall are 9,24 m x 24,51 m. The basic material is steel S355. The main frame is three-hidged frame. Each frames are connected by the purlins and girts. Spatial rigidity of the structure is provided by the rigid frame corners and sway bracings. Part of the design is crane runway for bridge crane from Demag company with load capacity of 5 t. Structure i designed in compliance with valid standards of ČSN EN and corresponds with ultimate and serviceability limit state. For structural design was used software RFEM 5.07.03 of Dlubal company.
|
|
|
Steel Structure of Industrial Building
Buchta, Vojtěch ; Horáček, Martin (referee) ; Brosch, Petr (advisor)
The diploma thesis deal with design of a technological building in Ostrava serving for the sorting of slag to enagle its sequential use. Geometry of the structure was customized to technological requests. Static system was considered in two versions – joint connections with vertical bracing and omni-directional frame. For detail processing was chosen the joint one, besause it showed up as more advantageous. Static calculation was performed by Scia Engineer 14 software, then some typical connections and drawings were manually designed.
|
|
|
Common boxing injuries
Sedláček, Petr ; Stich, Jaroslav (advisor) ; Zdobinský, Adam (referee)
Title: Common boxing injuries Objectives: Description of the causes of injuries and summarize the common frequent injury in training and matches of amateur and professional boxing. Methods: In this work was used the scientific method of the questionnaire and subsequent evaluation of analytical and synthetic data. Data analysis method was used in the theoretical part, which analyzed the literature and empirical part where the points were analyzed questionnaire, based on the graphical representation. Synthetic method was used to compare different points of the questionnaire and discussion work.In the study subjects are evaluated frequency of injuries in boxing, the causes of injuries and recovery time. Results: Through a questionnaire survey it was found that most frequently injury takes place a injury of the facial part of boxer's head. It was found 57% of all injuries in boxing in the facial part and it is a minor abrasions or bruises that do not affect the athlete's performance. Keywords: box, injury, joint, contest
|
|
|
Design of Automation of Some Steel Structures Elements
Kopeček, Josef ; Brdečko, Luděk (referee) ; Zídek, Rostislav (advisor)
The aim of the presented thesis is to create a program for automatic assessment of bolted and welded connections. The program uses procedures mentioned in the ČSN EN 1993-1-8. The comparison of the program is verified by the comparison of suitable chosen examples of analytical solution. The purpose of the program is to make the draft of bolted and welded connections more efficient.
|
|
| |
|
|
Case Study of Physiotherapy Treatment of a Patient with the Diagnosis of Total Hip Replacement
Papageorgiou, Chrystalla ; Vomáčková, Helena (advisor) ; Kratochvílová, Pavla (referee)
The abstract of my study concerns the treatment of the case of my patient who had an operation of total hip replacement on the right hip joint, caused by post dysplastic arthrosis. My practice was performed at Fakultni Nemocnice Kralovske Vinohrady. Physiotherapy program started on Tuesday 29th of January 2013 and ended on Friday 1st of February 2013. My Bachelor Thesis is divided in two parts: 1) Theoretical part 2) Practical part. In the theoretical part I analyse everything concerning the hip joint, muscles, joints, bones, ligaments, nerves as well as the biomechanical and kinesiological point of view of the hip joint. In the practical part I analyse every procedure I have done with my patient, all the examinations, conclusions, therapies and results. The patient was operated at OTK FNKV hospital at 22nd of January. Goals of the therapy was to decrease pain and edema, increase range of motion of the movement, increase mobility and elasticity of skin and also improve strength of the operated right hip according to the examinations I provided to the practical part. After the five sessions improvements were detected in the final kinesiologic examination. Pain was decreased to 3/10 according to VAS scale, edema was reduced, range of motion (ROM) of the movements and muscle strength were also...
|
|
|
Physiotherapy after fracture of ankle and foot
Hejčová, Mirka ; Molnár, Petr (advisor) ; Hamarová, Zuzana (referee)
82 Anotace (aj) Author: Mirka Hejčová Institution: Departement of rehabilitation medicine Title of Bachelor's thesis: Physiotherapy after fracture of ankle and foot Supervisor: Mgr. Petr Molnár Number of pages: 95 Number of attachments: 4 Year defense: 2013 Keywords: physiotherapy, fracture, ankle, joint, foot, osteosynthesis, conservative treatment In the theoretical part of this thesis is processed ankle and foot anatomy, kinesiology of ankle and biomechanics of foot. Another chapter involves traumatology of ankle and foot which lists types of injuries in this area and methods of treatment and diagnosis. The last chapter includes physiotherapeutic methods which can be used in therapy. The practical part includes a case study of two patients with trimalleolar fracture who attended the outpatient rehabilitation. One patient was treated conservatively and the other one surgically. Input and output kinesiology testing, short-term and long-term treatment plan are compiled at both patients, the course of their treatment is recorded and the success of therapy evaluated.
|
|
|
Intervention of autotherapy by patients with rheumatoid arthritis
HEJNOVÁ, Martina
The bachelor thesis deals with the problematics of rheumatoid arthritis and its autotherapy. The rheumatoid arthritis is a chronic inflammatory autoimmune disease affecting synovial lining of the joints, bursas, and tendons with many extra-articular symptoms. The target of the thesis is to find adequate options of physiotherapy and to suggest exercise unit which will create the basis for an educational material for the autotherapy of the patients with the rheumatoid arthritis. In the theoretical part, I have focused on the anatomy of the joint, the concept of rheumatology and the definition of the rheumatoid arthritis. The current condition, the etiopathogenesis, the diagnostics, the clinical picture, the prognosis, and finally the treatment and the therapy of this disease. Into the research part, I have included the thesis's targets, the research questions, the methodics, and the results. I have chosen a qualitative research survey with the help of the casuistries of five patients, who went through the input and output examination including the collection of personal data and anamneses, the kinesiology analysis, the Barthel, Index Test, and the Four Step Square Test. The input examination contained, moreover, the signature of The Informed Consent, the footprint, and the photo-documentation of the arms and the legs. The hands and the feet rehabilitation plan was laid down based on the examination. The therapy was successful in the all patients' cases. The regular intervened autotherapy caused the pain and joint stiffness relief, the momentum improvement mainly of the spine and upper limbs, and then the improvement of the arms and the lower limbs. The research results point out that the methods of the physiotherapy were adequately chosen because the therapy has the positive effect. This thesis and the educative material created on its basis can help patients themselves with the rheumatoid arthritis as well as the patients with other types of musculoskeletal-system diseases. It could then help the physiotherapists in practise with individual or group physiotherapy or the other persons with physical care of joints and musculoskeletal system.
|
guest ::
