|
|
Production of universal opener by fineblanking technology
Kučera, Radek ; Císařová, Michaela (referee) ; Peterková, Eva (advisor)
The aim of the thesis is to design a manufacturing technology of a part of the universal opener with an innovated design. The component is made of stainless steel 17 240 (X5CrNi18-10). The blank is 2 mm thick sheet metal. Within the literary study the comparison of the possible technologies of manufacturing has been carried out. With respect to the batch size (200 000 pieces) and to the required quality of the component the fineblanking technology has been selected. For the manufacturing of the component a triple action hydraulic press HFA 3200plus has been chosen. This press will be coupled in production line with a feeding line FBA 8/300. The main point of the thesis is to design a cutting tool and to create a drawing documentation. Another part of the project is the technical and economical evaluation of the designed manufacturing process.
|
|
|
Manufacturing of sensor cover by fineblanking technology
Kosíř, Tomáš ; Šlais, Miroslav (referee) ; Peterková, Eva (advisor)
Master´s thesis project elaborated within the scope of Master´s degree submits a proposal of manufacturing of sensor cover by fineblanking technology. Sensor cover is manufactured from 4 mm roll of sheet metal. The material component is microalloyed steel S355MC. Annual production batch is 800 000 pieces. Based on the literature study, several possible methods of production parts are described. After evaluation of the required accuracy, surface quality and annual production, the technology of fineblanking using V-ring has been chosen. On the basis of technological and control calculations was chosen the triple action hydraulic press HFA 4500 plus, made by Feintool with a rated power 4500 kN. Design of cutting tool has been designed with moving punch.
|
|
|
Production of form-parts by cutting
Tomášková, Veronika ; Hušek, Martin (referee) ; Dvořák, Milan (advisor)
The thesis elaborated in a master's degree programme Manufacturing Technology and Management in Industry proposes a technology for cutting form parts. The part is made of steel EN S235JRG1 (ČSN 41 1373) with 3 mm thickness. Based on literature review with a respect to yearly volume of production (100 000 pcs/year) and surface quality has been designed new technology of fineblanking for manufacturing of the part. For the technology of fineblanking have been made technological analysis and the tool has been design regarding to the chosen fineblanking press Feintool X-TRA 320. The conclusion of the thesis deals with technical-economical evaluation of manufacturing process and also has been compared the price of the part using unconventional production technology.
|
|
|
The Manufacturing of the Brake Disk by Fineblanking Technology
Kantor, Miroslav ; Řiháček, Jan (referee) ; Peterková, Eva (advisor)
The purpose of the diploma thesis is to design a manufacturing technology of the Brake Disk. The component is made of stainless steel 17 023 (X30Cr13). The blank is 2 mm thick sheet metal. Within the literary study the comparison of the possible technologies of manufacturing has been carried out. With respect to the batch size 200 000 pieces the fineblanking technology has been chosen. For the manufacturing has been chosen HFA 700 press. The major point of diploma thesis is to design a cutting tool and create a drawing documentation. The part of the project is the technical and economical evaluation of the designed manufacturing process.
|
|
|
The manufacturing of a flange by fineblanking technology
Povalač, Tomáš ; Šlais, Miroslav (referee) ; Peterková, Eva (advisor)
Aim of the project is to design new flange manufacturing technology. The flange is manufactured from stainless sheet 17 040 with 5 mm thickness and annual production batch of 800 000 pieces. Fineblanking process has been proposed as a new production technology. Technological and construction dimensions have been designed for the proposed technology. The fineblanking process is done by automated machine which consist of unwinding and straightening device, mechanical punch press and winding device. The manufactured part is punch pressed by tool which is located in the punch press in one lift. An economic evaluation compares current manufacturing technology with the proposed technology which is more economically convenient.
|
|
|
Manufacturing of chain wheel for mountain bike
Habr, Stanislav ; Peterková, Eva (referee) ; Podaný, Kamil (advisor)
HABR Stanislav: Manufacturing of chain wheel for mountain bike The goal is to design components of chain wheel for mountain bike. It will be made of structural steel. The variant was chosen the most optimal production through precise cutting edge of pushing the system hard punch tool – movable retainer. According to the calculations and dimensions were selected from company press Feintool. The economic evaluation is the annual dose 600000 pcs fixed price of one component of 11,88 CZK.
|
|
|
Project technology of production components "Sprocket - wheel"
Haluška, Ladislav ; Rumíšek, Pavel (referee) ; Žák, Ladislav (advisor)
The main aim of this thesis is proposing of acceptable technology with manufacture for a part of chain sprocket of the material 11 500, which is designated for a small light motorcycle with a cubature at most 50 cm. It is the prototype, now. The work is specialized on a technology of precision cutting with a pressure edge, at first. This is use for a technology. The component of this work is needed the literary study, calculating and drawing documentation and technical – economic valuation. Et the end of this work, you can see all attachments and all sources, which I used for this work.
|
|
|
Fineblanking component and its manufacturing
Lata, Miroslav ; Peterková, Eva (referee) ; Šlais, Miroslav (advisor)
The diploma thesis deals with a propose of a new manufacturing technology of component called „KULISA“ drawing number 4-DP-05-10/01. The beginning of this work is prepared as a literary study about blanking. There are explained some basic concepts necessary to introduce a blanking topic. Other interest of this work is an assessment of actual state of conventional blanking technology which is being currently used for component production. With regard to the deficiencies of the existing method is proposed new technology of fine blanking. In the proposal is evaluated technological site of component construction and blanking tools are proposed with stress analysis included. Last part of the work deals with the economic evaluation, where is being compared efficiency of existing and new technology.
|
|
|
The manufacturing of car latch component by fineblanking technology
Augste, Jakub ; Žák, Ladislav (referee) ; Peterková, Eva (advisor)
The project elaborated in frame of engineering studies branch Manufacturing Technology (N2307-00) is submitting design of technology production of the latch claw. The latch claw is a component of a car side-door latch assembly and can be used for different car models. The part is made of sheetmetal 4 mm thick. The material for the part is 15CrMo5, alloy steel for case-hardening purposes. Pursuant of the literary pursuit was designed several options of the part manufacture. With regard to required dimensional accuracy, cut-edge quality and expected production run (800 000 pcs. per year) was proposed manufacturing the part by fineblanking technology. Fineblanking is a cost-effective manufacturing method for accurate sheetmetal parts. For manufacturing parts was chosen Feintool hydraulic fineblanking press HFA 3200plus with total force 3200 kN. The press is coupled to a coil reel a strip straighter. Both units of Feintool feeding line FBA 8/300 are very compact, reducing space requirement. For the fineblanking tool design is used a moving-punch system because these tool systems are compact and economical to make and use. The tool make use of standardized cast iron fineblanking die set made by Fibro company. At the conclusion was compared the cost-effectiveness between two production methods – fineblanking with that of laser beam cutting.
|
|
|
The manufacturing of pulley cheek by technology of fineblanking process
Robotka, Tomáš ; Dvořák, Milan (referee) ; Peterková, Eva (advisor)
The Master´s thesis is elaborated within the framework of graduate´s study by institute of The Engineering technology and composed the technology of fineblanking process. The required component is made by stainless steel 17 240. The technological and constructional proportions were designed and calculated for required technology. The tool cuts out for one stroke one component, and is designed for mechanical three-active press MFA 1600 made by Feintool. The material’s strip of the scroll is situated in single sided rewinders QOPJ 160/650, and managed through leveling machines QRVP 160 into tools. The total force of press is 1600 kN. The main functional parts tools are made by steel 19 436, 19 437.
|
guest ::
