|
|
Monitoring properties of nanocomposites on base epoxy
Libra, Miroslav ; Rozsívalová, Zdenka (referee) ; Polsterová, Helena (advisor)
The present thesis deals with the study of nanotechnology in the field of composite materials (nanocomposites). Furthermore, the production, composition and electrical properties of these materials. Samples for the experiment are made of epoxy resin as matrix and titanium dioxide TiO2 as fillers with different benefits. Are the measurements the temperature dependence of permittivity, loss factor and internal resistivity.
|
|
|
Study of electric properties of composite
Bariš, Marián ; Havlíček, Svatopluk (referee) ; Polsterová, Helena (advisor)
The theme of this Bachelor's thesis is a problematics of composite materials. On a given samples of polyamide with a various weight filling of a milled mica were measured resistivity, permittivity and loss factor on a consequence of a temperature and filling. The chosen type was a filling with a milled mica in range from 0 to 40 of a weight percentage, temperatures were in range from 20 °C to 90 °C.
|
|
|
Multiobjective Optimization in EMC
Olivová, Jana ; Sekanina, Lukáš (referee) ; Křesálek,, Vojtěch (referee) ; Raida, Zbyněk (advisor)
The work is aimed to propose a methodology for creating an equivalent of composite materials used for construction of small aircraft. Such equivalent should enable to create numerical models of small aircraft in the simulation of precertication EMC tests for aircraft resistance against the lightning. Eliminating situations threatening the aircraft and passengers in the initial steps of the design will allow savings in production costs and contribute to the safety of air transport. In order to nd the equivalent of composite materials, global optimization methods will be used.
|
|
|
Bodywork Design of Formula Students Car
Malík, Jiří ; Pelikán, František (referee) ; Zvonek, Miroslav (advisor)
Diplomová práce pojednává o návrhu kapotáže vozidla Formula Student. Vozy této kategorie se každoročně učástní série mezinárodních závodů všech zůčastněných studentských týmů. Úroveň návrhu se posuzuje jak v dynamických tak ve statických disciplínách. Tato práce popisuje proces návrhu tří koncepčních variant společně s rozpracováním finální varianty pro fázi výroby. Navíc je zde prezentován koncept obsahující aerodynamický paket, který slouží jako výhledová studie možného vývoje vozidla.
|
|
|
Tail units design of VUT 100 aircraft made out composite
Berka, Martin ; Cejpek, Jakub (referee) ; Mališ, Michal (advisor)
This Master´s thesis describes the design of composite horizontal tail of VUT 100 aircraft. Load calculation and selection of the critical load cases is performed. Internal structure of stabilizer and right elevator is designed. Construction materials are chosen and the structure of the composite materials is proposed. FEM models of stabilizer and the right elevator are created in MSC Patran system and consequently the strength test of the models for the selected load cases is executed using MSC Nastran software and COMPOST.
|
|
|
Cutting forces when drilling fibre reinforced composites
Režný, Tomáš ; Sedlák, Josef (referee) ; Humár, Anton (advisor)
This master´s thesis is focused on fibre–filled composite materials, their distribution, labeling, usage, development and production. The aim of this work is complex processing of acquired technical knowledge, and evaluation of technological rehearsals of drilling composite materials which are reinforced by glas fiber and prepreg in terms of the impact of the machined material, wor-king conditions and the tool, and its wear to the feed force value and torque.
|
|
|
Design of Aileron of Composite Materials
Dvořák, Vlastimil ; Klement, Josef (referee) ; Urík, Tomáš (advisor)
This diploma thesis called „Aileron Design of Composite Materials” deals with the technologies of production used in aricraft industries. It shows appropriate conceptions of composite structures for the airplane aileron of Aero L-159A/B as well as a proposal of an accetable structure for RTM process.
|
|
| |
|
|
Filling materials for vertical and horizontal constructions using renewable raw materials
Gregor, Petr ; Vacula, Miroslav (referee) ; Bydžovský, Jiří (advisor)
This thesis deals with industrial hemp and its use in vertical and horizontal structures. The work is mainly focused on the fillers of industrial hemp and inorganic binder. In the practical part of the feasibility study for future use of industrial hemp in the construction industry as a filling materiál in vertical and horizontal structures. This area has been targeted by all test samples. They are presented here and evaluated and compared the results of tests on unconfined compressive strength, compressive strength, depending on the deformation density of fresh and hardened mixture and the termal conductivity of different types of inorganic binders and fillers such as hemp.
|
|
|
Study of electric properties of composite
Bariš, Marián ; Havlíček, Svatopluk (referee) ; Polsterová, Helena (advisor)
The theme of this Bachelor's thesis is a problematics of composite materials. On a given samples of polyamide with a various weight filling of a milled mica were measured resistivity, permittivity and loss factor on a consequence of a temperature and filling. The chosen type was a filling with a milled mica in range from 0 to 40 of a weight percentage, temperatures were in range from 20 °C to 90 °C.
|
guest ::
