National Repository of Grey Literature 73 records found  beginprevious53 - 62nextend  jump to record: Search took 0.01 seconds. 
Predictive machine tools maintenance system with the use of vibrodiagnostics
Semotam, Petr ; Nahodil, Petr (referee) ; Hammer, Miloš (advisor)
This diploma thesis concerns issues of predictive and condition based maintenance system of machine tools with using a vibrodiagnostics. It studies and researches its impacts through the basic processes of the maintenance system and characterizes the vibration diagnosis as its tool and mean. There is also described a process of putting condition based maintenance into practice in the practical part of the thesis. The development is realized at Siemens Ltd. Brno with all its requirements and aspects such as a maintenance audit which means the decision on the suitability of condition based maintenance within the current maintenance system, technical analysis as a part of introduction of vibration diagnosis and the practical example of acquiring, recording and assessment of measured vibration. Prior to the end the economic evaluation of the planned predictive maintenance system and the design of the general model of development and implementation of the maintenance system into practice are included.
Predictive system maintenance machines in engineering practice
Rázgová, Benedikta ; Řezníčková, Hana (referee) ; Hammer, Miloš (advisor)
This bachelor thesis deals with the predictive maintenance of machines in engineering practice. The first part of the thesis deals with problems theoretically, there is described generally maintenance and methods of technical diagnostics of machine tools. The practical part focused on the application of one selected method, vibrodiagnostics. Part of the work is the vibrodiagnosis evaluation of the milling center, the design of the predictive maintenance system and other recommendations for SMC Industrial Automation CZ s.r.o. Vyškov.
Principles of maintenance of the TPM method
Zahradníček, Lukáš ; Hammer, Miloš (referee) ; Řezníčková, Hana (advisor)
This master thesis concerns modern method of TPM used in the production companies for maintenance of machinery. In the theoretical part, general maintenance is first described, as well as the TPM method. There is also described the technical diagnostics, which was emphasized in the practical part in terms of the use of vibrodiagnostics in predictive maintenance. In the practical part there is presented the proposal for introduction of the TPM method at the SMC Industrial Automation s.r.o. in Vyškov.
Using the RCM in machine maintenance
Ludvík, Radek ; Řezníčková, Hana (referee) ; Hammer, Miloš (advisor)
The master's thesis deals with maintenance in the theoretical part, this part is describing historical development and individual systems. Then explains concepts of vibro-diagnostics and electro-diagnostics. Further work will focus on complex maintenance systems such as Reliability Centered Maintenance (RCM). The implementation of RCM in the manufacturing company is the subject of a practical part.
Maintenance and diagnostics of machine tools focusing on vibrodiagnostics, electrodiagnostics and tribodiagnostics
Houška, Jan ; Řezníčková, Hana (referee) ; Hammer, Miloš (advisor)
Master‘s thesis deals with maintenance and related technical diagnostics of machine tools. Diagnostics methods on which is the thesis focused are vibrodiagnostics, tribodiagnostics and electrodiagnostics. Work includes design of diagnostic system and measurement of vibration and electrical parameters of the machining center. Based on given results from data evaluation, further steps in predictive maintenance and usage of technical diagnostics for machine tools are recommended. Within tribotechnical diagnostics, the thesis is based on evaluation of long-term monitoring of process liquid status, which was used in several machining machines. A procedure for the measurement of selected parameters is proposed and periodical liquid status checks are established.
Measurement and evaluation of laboratory DC drive vibration
Bilý, Michal ; Zuth, Daniel (referee) ; Němec, Zdeněk (advisor)
This thesis encompasses measuring and rating of vibrations in electric machines. The theoretical part begins with a short description of possible causes of vibrations, which is followed by a discussion about what consequences the vibrational effects have on electrical devices. Then there is a description of available vibration sensors. The bigger part is then devoted to analysis of vibratory signal in both time and frequency domains. The practical part is divided into two chapters. The first one describes laboratory demonstration of control drive with DC motor, which is expanded by measurement of vibrations. The second chapter deals with measurement and analysis of said vibrations in the demonstration.
The influence of the vibrations of the grinding spindle of the grinder on the vibrations of large shafts during machining
Hanych, Libor ; Vlach, Radek (referee) ; Nahodil, Petr (advisor)
This master's thesis deals with vibrodiagnostics and its use for monitoring of the vibration transmission during grinding of large shafts at Siemens Electric Machines s.r.o. based in Drásov. Diagnostic system for machine tools testing was designed as well as a measurement methodology, which is used to detect the vibration transfer from the grinding spindle to the workpiece. Influences that affect the quality of the ground surface were determined, based on evaluation of measured data. The last part is dedicated to a proposal of a diagnostic and measuring system.
Proactive system maintenance machines in engineering practice
Morcinková, Lenka ; Řezníčková, Hana (referee) ; Hammer, Miloš (advisor)
This bachelor thesis concerns the technical diagnostics and maintenance of machine tools. The first part of it deals with this topic theoretically, the practical part focuses on the application of specific measures. Bachelor thesis includes vibrodiagnostic measurement of the lathe, suggestion of the proactive maintenance system and other activities that could help with the development of maintenance management in company SMC Industrial Automation CZ s.r.o.
Modern approaches in the maintenance field
Pšenková, Tereza ; Řezníčková, Hana (referee) ; Hammer, Miloš (advisor)
This master thesis deals with position of the maintenance in the company structure and with modern management approaches. One of the highest levels of maintenance is the proactive maintenance, which is using the technical diagnostics to find out the causes of failures. The most inportant in case of machines are vibrodiagnostics and thermodiagnostics, which are going to be applied on the motors in company Bosch Diesel s.r.o.
Vibration diagnosis of machines during routine tests
Kohutek, Tomáš ; Hammer, Miloš (referee) ; Nahodil, Petr (advisor)
This master thesis deals with the vibration diagnostics of machine vibrations during unit tests in industrial company Siemens Electric Machines s.r.o Drásov. In the master thesis is elaborated a design of the diagnostic system which contains selected methods of vibration diagnostics, methology, procedure of measurement and evaluation of measured values. The part of master thesis is also a practical example of measurement on which the mentioned system is tested.

National Repository of Grey Literature : 73 records found   beginprevious53 - 62nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.