|
|
Electrochemical Determination of Fomesafen
Maška, Jan ; Barek, Jiří (advisor) ; Fischer, Jan (referee)
The submitted work deals with the application of voltammetric determination of Fomesafen using non-traditional mercury meniscus modified silver solid amalgam electrode on model samples of Fomesafen in real aqueous matrices of drinking and river water. This method of measurement has been developed and optimized in my bachelor thesis, which the diploma thesis is related to. Fomesafen belongs to a group of herbicides used on a mass scale in the late 20th century in the USA and in many countries around the world still used even today. Among its side effects according to the EPA include, among others, potential carcinogenicity to humans and confirmed carcinogenicity to some mammals (such as rats) which led to a legislative regulation on its use in many countries around the world including the USA, the European Union and many others. Silver solid amalgam electrode has been developed with the intention to limit the use of mercury in accordance with new legislation of the European Union and the concept of green analytical chemistry. Despite the low levels of mercury mainly bound in the form of virtually harmless silver amalgam electrode retains very similar electrochemical properties with proven mercury electrodes. As part of the thesis, direct determination of a number of partial extraction of Fomesafen...
|
|
|
Electrochemical determination of 6-thioguanine at boron doped diamond film electrod
Humpolíková, Jiřina ; Fischer, Jan (advisor) ; Schwarzová, Karolina (referee)
This master's thesis is focused on the determination of 6-thioguanine (6-T) by DC voltammetry (DCV), differential pulse voltammetry (DPV) and flow injection analysis with electrochemical detection (FIA-ED) on a boron doped diamond electrode (BDDFE). The optimum conditions for determination of 6-T were found and under these conditions, concentration dependences were measured and the limits of quantification (LOQ) were calculated for each method. Medium of 60% methanol and phosphate buffer (PB) pH 2,0 was chosen as optimum for DCV and DPV determination of 6-T at BDDFE. For both DCV and DPV, the linear concentration dependences were obtained in concentration ranges of 6-T from 2 µmol·l-1 to 10 µmol·l-1 with LOQ 0,9 µmol·l-1 for DCV and 1,5 µmol·l-1 for DPV. Lower LOQ was achieved in PB pH 2,0, where LOQ was 0,6 µmol·l-1 for both DCV and DPV, but the problem was lower repeatability. In PB pH 2 6-T was determined by DCV in drinking and river water with LOQ 1,3 µmol·l-1 in both drinking and river water. The possibility of solid phase extraction was investigated as a method for preliminary separation of 6-T from urine. For FIA under optimized conditions (polarization potential 1300 mV, flow rate 5 ml·min1 and sample volume 50 µl) the linear concentrations dependences were obtained in concentration ranges...
|
|
|
Large-Surface Carbon Film Electrode - A Novel Sensor for Voltammetric Determination of Electrochemically Oxidizable Organic Compounds
Šmejkalová, Hana ; Vyskočil, Vlastimil (advisor) ; Dejmková, Hana (referee)
of the Diploma Thesis In this Diploma Thesis, the electrochemical behavior of 4-nitrophenol (4-NP) was studied at a newly prepared large-surface carbon film electrode (ls-CFE) using techniques of DC voltammetry (DCV) and differential pulse voltammetry (DPV) with the aim to develop sensitive analytical methods for its determination. Voltammetric behavior of 4-NP was investigated in the region of anodic potentials, in dependence on the pH of the medium used (realized using Britton-Robinson buffer). The optimum pH values for the determination of 4-NP were chosen as follows: pH 3.0 (for DCV) and pH 7.0 (for DPV). During anodic oxidation of 4-NP on the ls-CFE at the concentration of the analyte of 1·10-4 mol/l, the passivation of the electrode surface occurred. Thus, it was decided to record series of measurements always at a new carbon film. Using the sample of 4-NP (at the concentration of 1·10-4 mol/l), the repeatability of the application of individual carbon films was tested, with obtained RSD values of 3.7% and 3.6% for DCV and DPV, respectively. Under optimum conditions, the calibration dependences of 4-NP were measured in the concentration range from 1·10-6 to 1·10-4 mol/l, with the limits of quantification (LQs) of 1.5·10-6 mol/l (for DCV at the ls-CFE) and 4.6·10-7 mol/l (for DPV at the...
|
|
|
Biomarker detection using electrochemical method with microfluidic chip
Klepáčová, Ivana ; Svoboda, Ondřej (referee) ; Neužil, Pavel (advisor)
The thesis is focused on the development of the electrochemical system with microfluidic platform for the detection of multiple biomarkers. It analyses the use of biomarkers for the early diagnosis of cancer. The theoretical part contains basic information about voltammetric methods and microfluidic systems. The practical part provides solutions to the microfluidic chips, including the description of the used materials, designs, methodologies of preparation and conclusions from the testing of the manufactured microfluidic systems. The thesis describes the lock-in electrochemical system which measures the response of 4 electrochemical cells simultaneously. For the electrochemical system measurements, an electrochemical chip consisting of 64 electrochemical cells was used. The results of the analysis include the processing of the system tests and detected voltammetric curves of the Fe2+/Fe3+ solution and cysteine.
|
|
|
Influence of liposomal platinum cytostatics on cancer cells – voltammetric study
Laníková, Petra ; Prášek, Jan (referee) ; Hynek, David (advisor)
Aim of this thesis is voltammetric study influence of liposomal platinum cytostatics on cancer cells. One of the goals is summarize available informations about influence of cisplatine on cancer cells, its encapsulation into liposome and affection of this cytostatic cisplatin encapsulated in liposome on cancer cell lines. In literary recherche is detail description of these issues. Than is there specification of voltammetric methods, which serve to electrochemical detection of cisplatin. Based on literary recherche was chosen the best method for detection and subsequently the method was optimalized and than was applied to measuring itself.
|
|
|
The Use of Chemically Modified Electrodes in Voltammetric Analysis of Nitroaromatic Compounds
Prchal, Vít ; Vyskočil, Vlastimil (advisor) ; Navrátil, Tomáš (referee)
The main objective of this Diploma Thesis is studying the possibility of detection of nitro derivatives of aromatic hydrocarbons by using chemically modified working electrodes in electrochemical analysis. Compounds analyzed in this work were 1-nitronaphthalene and 6- nitrochrysene - these compounds were chosen on previous experience with surface modified working electrodes (the chemical/physical properties of these substances). All the analyses were performed by using differential pulse voltammetry (DPV) on hanging mercury drop electrode (HMDE) in classic three-electrode system. The original premise of chemical modification of electrode surface is the change of its selectivity towards different compounds - meaning the change of the electrochemical response. The modification agent used in this thesis is 1-octanethiol. Its thiol group offers great potential of strong interaction with the metal surface of the mercury electrode. Voltammetric responses of both compounds were recorded in acidic, neutral and basic solutions (pH=2, pH=7, pH=12) including the responses when the electrode surface was modified. Next objective was the optimization of the modification procedure itself (transferring of the mercury drop from one media to another without damaging or tearing it off from the capillary orifice)....
|
|
|
Electrochemical determination of chlortoluron using carbon paste electrode
Houšková, Lucie ; Zima, Jiří (advisor) ; Vyskočil, Vlastimil (referee)
Chlortoluron is a herbicide from the group of substituted ureas and it is used for weed control in production of cereals and poppy. Substituted ureas are widely used but these substances are known for their high mobility in soil, persistence and contamination of underground water. Therefore, the development of analytical methods suitable for residual concentrations determination is necessary. This thesis deals with the determination of chlortoluron using carbon paste electrode (CPE) by the methods of differential pulse voltammetry and high-performance liquid chromatography with electrochemical (HPLC-ED) and spectrophotometric (HPLC-UV) detection. The aim of the work was to find optimal conditions suitable for chlortoluron determination. Further, the possibility of using miniaturized carbon paste electrode (mCPE) and usability of tested methods for determination of chlortoluron in model samples of river water and soil were studied. Concentration dependences in deionized water were measured by the method of DPV in the Britton-Robinson (BR) buffer (pH = 3) and methanol (10 %, v/v). The limit of detection was 3,7∙10-7 mol∙dm-3 in the case of CPE and 8,7∙10-8 mol∙dm-3 in the case of mCPE. Also, concentration dependences were measured using HPLC with mobile phase containing BR buffer (pH = 4) and...
|
|
|
Voltammetric Determination of Genotoxic 2-Nitrofluorene at Screen-Printed Carbon Electrodes
Jelínková, Lenka ; Vyskočil, Vlastimil (advisor) ; Zima, Jiří (referee)
of the Bachelor Thesis Voltammetric behavior of genotoxic 2-nitrofluorene (NF) has been investigated using direct current voltammetry (DCV) and differential pulse voltammetry (DPV) at a screen- printed carbon electrode (SPCE). The optimum conditions have been found for its determination in a concentration range from 1×10−6 to 1×10−5 mol l−1 for DCV technique and from 1×10−7 to 1×10−5 mol l−1 for DPV technique. An optimum medium for DCV at the SPCE was a 0.1 mol l−1 acetate buffer of pH 4.6, an optimum time of stirring of the sample prior to the analysis was 120 s (the attained limit of quantification (LQ) was 8.5×10−6 mol l−1 of NF). For DPV at the SPCE, the optimum medium was an acidic component part of the Britton - Robinson buffer of pH 2.0; the attained LQs were 6.2×10−7 mol l−1 of NF for the concentration range from 1×10−6 to 1×10−5 mol l−1 (at the stirring time of the sample of 120 s) and 2.0×10−7 mol l−1 of NF for the concentration range from 1×10−7 to 1×10−6 mol l−1 (at the stirring time of the sample of 300 s).
|
|
|
Voltammetric Determination of Selected Nitroimidazole Drugs
Škvorová, Lucie ; Vyskočil, Vlastimil (advisor) ; Fischer, Jan (referee)
The aim of presented Diploma Thesis was to study an electrochemical behavior of nitroimidazole drugs metronidazole and ornidazole and to find optimal conditions for their voltammetric determination at a mercury meniscus modified silver solid amalgam electrode using DC voltammetry (DCV) and differential pulse voltammetry (DPV). Voltammetric behavior of selected drugs was investigated in dependence on the pH of the medium used (realized using a Britton-Robinson buffer (BR buffer)) and a mechanism of the reduction of both drugs was investigated using cyclic voltammetry (CV). The optimum medium for voltammetric determination of studied nitroimidazole drugs at the m-AgSAE in a region of cathodic potentials was found to be the BR buffer of pH 8.0. Then, the concentration dependences were measured in this optimum medium in the concentration range from 2·10-7 mol/L to 1·10-4 mol/L. The limits of quantification (LQs) for both metronidazole and ornidazole were found in the concentration order of 10-7 mol/L by using DCV and DPV at the m-AgSAE. The applicability of the newly developed voltammetric methods of the determination of nitroimidazole drugs was verified on the model samples of drinking and river water, with LQ ≈ 2·10-7 mol/L for both DC voltammetry and differential pulse voltammetry at the m-AgSAE....
|
|
|
Voltammetric Determination of Selected Nitroaromatic Explosives
Křížová, Tereza ; Vyskočil, Vlastimil (advisor) ; Fischer, Jan (referee)
This Diploma Thesis is focused on study of electrochemical behavior of 2,4,6-trinitrotoluene (TNT) and 2,4,6-trinitrophenol (picric acid) on finding the optimum conditions for their determination using direct current voltammetry (DCV) and differential pulse voltammetry (DPV) at a mercury meniscus modified silver solid amalgam electrode (m-AgSAE) in the solution of Britton-Robinson (BR) and on finding of the limit of quantification (LQ) for these substances. Practical applicability of the newly developed methods was verified on direct determination of TNT and picric acid in model samples of drinking and river water. Moreover, the electrochemical behaviors of TNT and picric acid was studied using cyclic voltammetry (CV). Optimum medium for the determination of TNT at m-AgSAE was: methanol-BR buffer pH 4.0 (1:9). Upon the DCV it is proper to apply regeneration potentials Ereg,1= 0 mV and Ereg,2= -1100 mV and upon the DPV was apply regeneration potentials Ereg,1= 0 mV and Ereg,2= -600 mV were applied. The concentration dependence of the peak current was found to be linear for both techniques over the concentration range of 1·10-6 -1·10-4 mol/l with LQ of 0.54 µmol/l (for DCV) and 0.46 µmol/l (for DPV). The method developed for the determination of TNT were verified on the model samples of drinking...
|
guest ::
