|
|
Case Study of physiotherapy treatment of a patient with the diagnosis of Distorzio articulatio talocruralis pedis l. dx gravis
Zápotocká, Kateřina ; Hnátová, Iva (advisor) ; Jeníček, Jakub (referee)
Title: Case Study of physiotherapy treatment of a patient with the diagnosis of distorsio articularis talocruralis pedis l. dx gravis Summary: The aim of this thesis is to introduce readers to the topic of physiotherapy sessions at diagnosis ankle sprains. The general described the anatomy and biomechanics of the foot, with a focus on the ankle joint. Injuries of the ankle will focus on the distortion. It is here described mechanism of injury, classification, clinical presentation and diagnosis. The general conclusion of the thesis describes the methods and therapeutic procedures and physical therapy to help the patient to full recovery. A special part is prepared on the basis of patient case studies. They also described individual therapy in the treatment. Among these therapies are introduced application of selected therapeutic techniques that I used in therapy to achieve the objectives. Key words: casuistry, physiotherapy, distortion, physical therapy
|
|
|
Gender and Media in the Age of Post-Modernity: Revealing Gender Stereotypes in the Contemporary Czech Advertising Discourse
Olbertová, Martina ; Šoltys, Otakar (advisor) ; Nečas, Vlastimil (referee)
ENGLISH SUMMARY The main objective of this thesis was to provide a complex perspective on the mutual relationship of gender and media in the age of post-modernity with a special attention to the stereotypical gender portrayal presented to us by the contemporary Czech advertising discourse. We chose to demonstrate this problematics through the methods of semiotic analysis on the analytical sample of 5 advertisements (consisting of selected TV commercials) representing various aspects of stereotypical gender images appearing in the today's Czech advertising contents. We then subjected these selected advertisements to the analytical methods in pursuit of finding the answers to the questions related to the media image of men, women and our society that the stereotypical gender depictions contained in these advertisements help to construct. Although many of these advertisements appear to be openly sexist or even misogynic on the first sight, using the mechanisms of semiotic analysis we came to a rather opposite conclusion proposing the analyzed contents are rather pro-feminine tending toward an extensive masculine critique. This result, however, is based mainly on the mechanisms of oppositional reading of the subjected texts. On the other hand, it is presumable that the "average media consumer" not having access...
|
|
|
Tube microphone preamplifier
Čacký, Adam ; Hruboš, Zdeněk (referee) ; Brančík, Lubomír (advisor)
The theme of the master´s thesis is design a microphone preamplifier which uses vacuum tube as a main amplifying element. Part of the work is theoretical assumptions for the optimal design and implementation of peripheral involvement, comparing the properties of components used and the resulting parameters of modeled device. The thesis also includes a proposal of the source unit for supplying all parts of the preamplifier. The results are accompanied by circuit simulations and laboratory measurements of the main parameters of the designed device.
|
|
|
Analog Guitar Multieffect
Zapletal, Ondřej ; Petržela, Jiří (referee) ; Staněk, Miroslav (advisor)
Presented thesis is focused on guitar effects used for sound modification produced by an electric guitar. The main aim of this thesis is an introduction into guitar effects topic and the design of selected types chosen as follows: overdrive, noise gate and delay. Final multieffect is created by these mentioned components. Another part of presented thesis is the design of source feeding the whole final multieffect. Furthermore, the design of chosen components is presented in this thesis as well as the including of control simulations and PCBs.
|
|
|
Analog Guitar Multieffect Using Tube for Signal Distortion
Kufa, Michal ; Kincl,, Zdeněk (referee) ; Staněk, Miroslav (advisor)
Presented thesis is oriented on the short survey of guitar effects functionality and the design of chosen guitar effects set embedded into one device. The first effect is related to input signal distortion using a vacuum tube, in this case the couple of double-diode tubes. Next effect is noise gate filtering parasitic artefacts included in input signal lower than set threshold level. The last realized guitar effect is chorus. Each individual effect can be controlled by footswitch. The first two sections are focused on the theory of guitar signal processing, the third section solves the whole design of chosen device, the realization and the proof of designed device functionality are described in further sections.
|
|
|
Design and construction of guitar multi-effects
Šindelář, Jindřich ; Kratochvíl, Tomáš (referee) ; Petržela, Jiří (advisor)
This thesis focuses on design of electronic circuit which combines several effects for electric guitar. These effects are switchable to achieve relatively wide range of sounds usable in different music genres. Each chapter of this text describes function and design process of single subcircuit. In the summary of this text are written up sound characters of effect in particular modes. Attachments contains the results of design needed to build a functional prototype of the whole circuit.
|
|
|
Basic measurement of dynamic properties of bipolar and unipolar transistors
Lang, Radek ; Šotner, Roman (referee) ; Dřínovský, Jiří (advisor)
The aim of this bachelor’s thesis is to describe the dynamic parameters of semiconductor devices. The other aim is to build a measuring workplace, on which is possible to carry out measurement of dynamic properties of bipolar and unipolar transistors. The bachelors’s thesis also solves a design and a production of an universal product, on which measurements are carried out. Individual measurement is automated and individual devices are connected to the product and results are controlled by computer analysis.
|
|
|
Effect amplifier for electric guitar
Kočiš, Martin ; Brančík, Lubomír (referee) ; Kratochvíl, Tomáš (advisor)
In the first chapter, the thesis concisely describes perception of harmonic frequency components by human ear. The second chapter introduces the reader into purpose of guitar effects and summary of usual types, which is possible to meet on the market. The third chapter contains functional description of chosen effects including designed schematics and simulations of functionality in time and frequency domain, eventually unrealized solution. The device contains input highpass filter with emitter follower, booster, overdrive and clean amplifier, circuit for octave-up frequency shift, delay line, output emitter follower with lowpass filter and power supply for all these circuits. Selection of the effects and its controls was subordinated especially to use in alternative rock music. The design is based on simulations executed using OrCAD PSpice. The realization process and the measurement is described in the fourth chapter and the last chapter contains conclusion of the project.
|
|
|
Support structures for 3D printing from metallic materials
Hruboš, David ; Vrána, Radek (referee) ; Koutný, Daniel (advisor)
This bachelor’s thesis deals with additive technology selective laser melting, which allows creating 3D objects from metal powder. The support structures are required in this process to dissipate process heat and anchor the part to the base plate. Four new types of support structures were designed in this work. The functionality of the structures was verified and mechanical properties of structures were compared in a strength test.
|
|
|
Tube microphone preamplifier
Čacký, Adam ; Hruboš, Zdeněk (referee) ; Brančík, Lubomír (advisor)
The theme of the master´s thesis is design a microphone preamplifier which uses vacuum tube as a main amplifying element. Part of the work is theoretical assumptions for the optimal design and implementation of peripheral involvement, comparing the properties of components used and the resulting parameters of modeled device. The thesis also includes a proposal of the source unit for supplying all parts of the preamplifier. The results are accompanied by circuit simulations and laboratory measurements of the main parameters of the designed device.
|
guest ::
