|
|
Identificators hypokinetic load by driving
Tluchořová, Terezie ; Jelen, Karel (advisor) ; Lopot, František (referee)
Title: Hypokinetic load Identificators by driving vehicle Objectives: Development and testing of methods for determining changes in the mechanical parameters of the axial system of professional long-distance drivers. Design and testing procedure for clinical and physical examination sensitive to changes, that occur due to vibration and static load when driving the truck. Methods: TVS method, morphology of the spine, measurement of vibration exposure Results: TVS method that was used in the thesis has proved to provide information on the resonant frequency of the resonant frequency and the total attenuation of the spine with sufficient precision to ride their influence was clearly identifiable. Used accelerometer measurement of oscillations vibrational excitation spine has also proved applicable and provides objective parameters. Keywords: TVS method, vibration, hypokinesia, acceleration, driving, LBP
|
|
|
Use of digital accelerometers in Linet bed controls
Dvořák, Ferdinand ; Sekora, Jiří (referee) ; Kolářová, Jana (advisor)
The subject of this bachelor thesis is a design of methods for accelerometer usage in medical bed controllers in order to eliminate the activation button. In the introduction the Linet company is presented and the issue of legislation and safety of controling the medical beds is briefly discussed. This part is followed by a theoretical chapter considering MEMS technology and accelerometers. The metodology of reference and simulative signals acquisition is designed. These signals are then analysed. In following chapters the particular methods of solutions are presented. The comparison of the presented methods and the final summary of the thesis is included in the conclusion.
|
|
|
Objectification of Calculation of Passing Sight Distance Parameters
Valentová, Veronika ; Kocourek,, Josef (referee) ; Mahdalová,, Ivana (referee) ; Radimský, Michal (advisor)
Overtaking maneuver is very complex event influenced by many parameters. The most important parameters are vehicle performance, longitudinal slope, the speed at the beginning of the maneuver, the reaction time of the driver. Overtaking distance at CSN 73 6101 is determined on the basis of a simplified physical model. It considers constant speed of vehicles (overtaking and overtaken) and it does not consider a longitudinal gradient of road. This calculation is used for several decades and it is required to verify this procedure. That was the purpose of this work. Detailed physical model was performed for several types of passenger vehicles, performance curves and gear changes were included too. Distances between vehicles at the beginning and in the end of the maneuver were chosen with regard to reaction times of drivers. Distances were compared with conclusions of observation studies. Input values of some parameters were determined by own measurement and compared with data reported in the literature. The analysis was performed using the video camera positioned at the front and rear of the vehicle. For selected vehicle were conducted simulations testing the influence of particular parameters. The parameters with the biggest influence were longitudal slope of the road and rolling friction. To achieve results useful for a possible regulations update for the design of roads another simulation models for 43 variants of passenger cars with different engines and transmissions were done. The vehicles were divided into categories based on engine capacity and engine power (up to 1400 ccm, over 1400 ccm; 66 kW to over 66 kW). Results were compiled in tabular form that could be used to discuss modifications to CSN 73 6101 Design of roads.
|
|
|
Identificators hypokinetic load by driving
Tluchořová, Terezie ; Jelen, Karel (advisor) ; Lopot, František (referee)
Title: Hypokinetic load Identificators by driving vehicle Objectives: Development and testing of methods for determining changes in the mechanical parameters of the axial system of professional long-distance drivers. Design and testing procedure for clinical and physical examination sensitive to changes, that occur due to vibration and static load when driving the truck. Methods: TVS method, morphology of the spine, measurement of vibration exposure Results: TVS method that was used in the thesis has proved to provide information on the resonant frequency of the resonant frequency and the total attenuation of the spine with sufficient precision to ride their influence was clearly identifiable. Used accelerometer measurement of oscillations vibrational excitation spine has also proved applicable and provides objective parameters. Keywords: TVS method, vibration, hypokinesia, acceleration, driving, LBP
|
|
|
Measuring the Manoeuvres of Public Transport Vehicles to Determine a Comfortable and Safe Ride
Hlavová, Vendula ; Petrás, Jan (referee) ; Tokař, Stanislav (advisor)
The comfort perceived by passengers during transport in public transport plays a vital role, and its improvement can lead to attracting more customers. For this reason, there is a constant effort to improve the comfort of the passenger. This thesis deals with the objective measurement of the maneuvers of MHD in Brno (tram, trolleybus, bus) with the XL Meter and together with the subjective evaluation of the standing and sitting figurant, determines the limit values of longitudinal and transverse acceleration for comfortable ride and dangerous ride, which can lead to accidents to passengers.
|
|
|
Methods of analysis of vibration signals
Sivera, David ; Hájek, Vítězslav (referee) ; Janda, Marcel (advisor)
The aim of the thesis is to focus on the different methods of analysis of vibration signals. Focusing on the physical fundamentals of vibrations and a description of their origin in an electrical machine. Describe the vibration sources from mechanical across the electromagnetic to the aerodynamic. Defining the current defects of electric machines and sensors suitable for the measurement of vibrations in an electric machines. Introduction to the methods of analysis of vibration signals in the time and frequency domain. Then using some of these methods for the analysis of vibration signals measured asynchronous motors with different manufacturer defined production defect. The conclusion is composed from the comparison between measured and analyzed results.
|
|
|
Dynamic analysis of lightweight bridge construction
Krzywoň, Filip ; Nevařil, Aleš (referee) ; Vlk, Zbyněk (advisor)
The thesis compares the dynamic response of lightweight footbridge structure. Two finite element models were made. One in Ansys 15.0 software, and another in RFEM 5.05 structural software. The results of the models were compared to each other. The response to dynamic excitation from pedestrians was evaluated in accordance to ČSN EN 1990/A2.
|
|
| |
|
|
Acceleration of pedestrians move from a standing start
Ciępka, Piotr ; Reza, Adam ; Zębala, Jakub
The article reports the results of the accelerations of women and men from a standing start to slow, normal and fast walking, running and forcing. The obtained results presented in the form of functions depending on the road in time, compared with the results of tests carried out in 90’s of twenty century by Strouhal, Kuhnel and Hein. There were differences between those results, which allow to apply new data of acceleration.
|
|
|
Proposal control system motorcycle to suppress riding errors leading to accidents
Přibyl, Tomáš ; Liška, Jiří (referee) ; Zuth, Daniel (advisor)
Work tackles the general design systems of automatic control of engine power and braking effects so that avoid any unnecessary dangerous situations and to improve the driving characteristics and suppression causes of accident due to bad decisions of driver. Is required to propose a general system based on the draft sensors and control circuits, their relationships, design control processor, which will be without the knowledge of the driver intervene in driving motorcycle.
|
guest ::
