National Repository of Grey Literature 52 records found  beginprevious42 - 51next  jump to record: Search took 0.00 seconds. 
Modification of the filler in cement-bonded boards with alternative filamentous fillers
Dywor, Michal ; Vacula, Miroslav (referee) ; Bydžovský, Jiří (advisor)
The cement boards are commonly used as a filler fir or spruce chips-profit wood. The increasing demands for construction materials forcing technology to develop new types of composite materials using an alternative source of fillers. In this work in the context of theoretical knowledge about the specified fibers in composite systems are discussed properties of cement binder and filler for cement – bonded particleboards and alternative materials. The practical part describes the test methods designed recipes and then made boards of which were carved specimens intended for testing the properties of boards with alternative fillers.
Dispersion measurements of optical transmissions.
Motúz, Rastislav ; Urban, František (referee) ; Filka, Miloslav (advisor)
This thesis firstly theoretically describes phenomena which appear in optical fiber transmission. The theoretical part of the thesis deals with linear and non-linear phenomena, and later on proceeds to dispersions with a more significant effect on the optical transmission quality. It puts polarization to the centre of the phenomenon called Polarization mode dispersion (PMD), which is the main object of our interest. It leads to a deep PMD description from the point of view of polarization states, limit values, compensation methods, and methods of measurement. The practical part of this thesis deals with a draft of PMD measurement via Fixed Analyzer method. For the purposes of this measurement, we used the optical spectral analyzer MS9740A. In order to compare measured values, the proposed idea then proceeds to the reference measurement by using a modular platform EXFO FTB--200 in combination with CD/PMD module EXFO FTB-5700. Results of measurements have been evaluated for the limit values defined by the standard. In the last chapter of this thesis, the reference measurements are compared to the Fixed Analyzer method. All the advantages and disadvantages of individual measurement methods are identified at the end of this chapter too.
Standards for application of polymer optical fibres
Stiburek, Martin ; Tejkal, Vladimír (referee) ; Šporik, Jan (advisor)
The aim of thesis is description of polymer optical fiber (POF). In particular, focusing on their application and its associated standardization. After explaining the principle of signal transmission by polymer fibers, glass fibers are compared with the polymer fibers. The attention is then paid to the types of POF and their connectors. Another part is engaged in standards of polymer fibers, according to their area of application. Following chapter describes the application of polymer fibers in practice, especially in the automotive industry and sensor technology. Standalone chapter is dedicated to deploying POF fibers in LANs. It mentions comparasion with copper and wireless networks, summarizes the advantages and disadvantages. Chapter also provides an overview of the components used in POF - optical converter, switch with optical interfaces, optical network card, etc. In the practical part is created the design of home network for two-storey family house. The proposal was implemented by CableProject CAD software, first using copper cabling (UTP category 5e) and then using polymer fibers. Finally, both proposals are compared with each other. It has been made detailed financial analysis, compared performance of instalation and methods of cable instalallation. The practical part is also dedicated to measuring the parameters of POF networks, the impact of the attenuation loss, explores methods of joining glass and polymer fibers and is engaged in IPTV transmission simulation in real conditions.
Measurement module with power over fiber
Dvorský, Pavel ; Beneš, Petr (referee) ; Havránek, Zdeněk (advisor)
The thesis deals with design and construction of low-power measurement device with power over optical fiber. This device should measure input signal in range of 50 mV to 50 V and the results of measurement sent through optical fiber into sensing module.
Design of Graphic Interface for Calculation of Differential Group Delay
Vohralík, Jan ; Křivánek, Vítězslav (referee) ; Kyselák, Martin (advisor)
The Bachelor's thesis is aimed to the problems regarding Polarization mode dispersion in optical fibre. Polarization mode disperzion limits the bandwidth of high speed comunication system. It cases a differential group delay between different polarizatins. If the delay is too high than the bits overlap and a bit error rate is increased. The work include description of polarization in Jones space and Stokem space. For description of Polarization mode disperzion is used PMD vector. I demonstrate influence of differential group delay in optical fibre at special grafic program develop in C# language.
Design of Multiplex Optical Fibre Link
Krejča, Libor ; Křivánek, Vítězslav (referee) ; Kyselák, Martin (advisor)
In this thesis I consider problems of optical multiplexers, optical amplifiers and designing optical networks with this components. CWDM and DWDM are the most common used multiplexers today. I describe principles of realization multiplexers from basic level to realization in WDM networks. EDFA is also common used amplifier today and I describe his internal structure and how it works. Today, we can observe many realization of optical netwoks with Raman amplifiers, especially in long haul networks. Raman amplifier is characterized in brief. In next chapter I describe the design of optical communication systems and the main designing equations are explained. Then I used the equations for example of designing optical communication system with multiplexers, EDFAs and other components, which are needed for function of the system. In last chapter I explain mathematical model of signal propagation in optical fiber called nonlinear Schrodinger equation, which includes main optical effects in fiber like chromatic dispersion or Kerr effect. The simulation model and his numeric solution was designed including PMD effect, the simulation model is programmed in MATLAB.
The Optical Link Error-Rate Determination
Joch, Antonín ; Kapoun, Vladimír (referee) ; Kyselák, Martin (advisor)
The master thesis discusses physical causes of light polarization and problems brought by nascence of Polarization Mode Dispersion (PMD). These problems occur especially by high speed systems on optical cable traces. The thesis deals with actuation of transmitted signal by influence of Inter Symbol Interference and it also deals with methods for its measuring and compensation. As a results of measurements are in text presented data provided by EXFO Electro-Optical Engineering Inc. Company. Significant part of the thesis focuses on optical link Bit Error Rate (BER) which is connected with Signal to Noise Ratio (SNR) and signal quality (Q-factor). Further on it is possible to find in text about so called eye diagram which is display mode that shows influence of communication channel on shape of the transmitted signal. To this diagram is related another one called constellation diagram which describes modulation mode and makes it possible to map dispersion of signal points around their nominal values. In connection with so called trajectory it makes vector diagram. Practical part includes depiction of these diagrams in MATLAB development environment.
The impact of polarization mode dispersion on error-rate of optical fibre link
Dorociak, Petr ; Křivánek, Vítězslav (referee) ; Kyselák, Martin (advisor)
Master’s thesis engages in the impact of polarization mode dispersion on optical communication system. Polarization mode dispersion is mathematically described by Stoke’s and Jone’s space and ensure the theoretic causes of the rise of polarization mode dispersion that are divided on the external and internal effects. On the basis of these effects grow up a differential group delay (DGD) which makes causes that individual polarization modes have between them a time delay and limitation of maximum bit rate. Then master´s thesis analyses the influence of the polarization mode dispersion on the pulse enlargement and on the modulation signal. In this work, there are described the most applicated optical modulation formats. Polarization mode dispersion has also influence on the bit error rate of optical fibre link and closing of eye diagram too. Eye diagram is used to view the transmission characteristics and diagnoses the channel errors. Eye diagram is connected with the definitions as a bit error rate (BER) and signal-to-noise ratio (SNR) that are explained in this work too. Following the gained experiences it was designed an useful graphic interface to display the effect of the polarization mode dispersion on the transmitted signal. Realization of the graphic interface is created in the program MATLAB. In Matlab-Simulink are created six models according to the kind of modulations with characteristic AWGN (Additive White Gaussian Noise) channel. Program was tested for a typical values. In all calculations it is counted only with the losses that are caused by the polarization mode dispersion. It is not calculated with the losses that are caused by a chromatic dispersion and attenuation. At the end of this work are evaluated all types of modulation formats depending on the polarization mode dispersion, optical fibre length, price and complexity of the realization. Atteined results of my master’s thesis are compared with two foreign articles.
Carbon Fibre Composite Materials
Mikula, Martin ; Molliková, Eva (referee) ; Němec, Karel (advisor)
In the first part of a Bachelor's work there is a general introduction with composite materials. These materials are seperated on the basis of matrix kind. The production of composite materials is described as well. The second part is focused on the carbon fibre materials in more detail. The application of composite materials in aviation industry is in the third part of the Bachelor's work.
Absorption cells based on HC-PCF fibers
Oulehla, Jindřich
This work is oriented towards our research in the field of splicing and ending of optical frequency references based on hollow core photonics crystal fibers (HC-PCF). This type of references is very promising optical element to replacing c assic bulky absorption cells for laser frequency stabilizat on. We prepared and present methods of splicing HC-PCF to standard telecommunication fiber by a fiber splicer. A special care was taken to optimize the splicer setting and to find and obtain a splice with minimal optical losses between HC-PCF and SMF. The manufactured fiber cell was closed at one side by connecting to SMF and second fiber end was prepared for placing into the vacuum chamber with the help of vacuum-tightened connection to be used as a optical frequency reference based on the acetylene gas for frequency stabilization of the laser standards.

National Repository of Grey Literature : 52 records found   beginprevious42 - 51next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.