|
|
Influence of essential parameters on the radial clearance and stress-strain states in ball bearings
Šperka, Václav ; Vrbka, Jan (referee) ; Fuis, Vladimír (advisor)
Master thesis is focused on the research of influence of selected substantial parameters on stress – strain states in the deep groove radial ball bearing. The influence of radial load is analyzed, such as the influence of size of the bearing and row of the bearing, also influence of radial clearance is quantified. Next, the influence of thermal distribution in the bearing is analyzed for different combinations of thermal distributions and radial clearances. Conclusions from analyses are then used in the last task – suggestion of radial clearance for customer – specified assembly. Problem is solved using the finite element method (FEM) in pre/post processor MSC.Patran and solver MSC.Marc. To make analyses faster the substantial parameters are implemented in the algorithm for automatic generation of the bearing calculation (batch file).The theme of this thesis was commissioned by ZKL - Research and development, a. s.
|
|
|
Individual ventilation system with recuperation
Hrabánek, Radek ; Zerzaňová, Alena (referee) ; Hejčík, Jiří (advisor)
The diploma thesis is consisting of theoretic part, which deals with used ventilating systems, describes basic types of air-conditioning systems and basic characteristics and diversification of radiant cooling systems. Following part attend to design of ventilating system and radiant cooling system for cooling of the flat. Design of the ventilation systém is based on minimum air flow per person. Design of the radiant cooling system is based on calculation of thermal loads. Design documentation is part of the diploma thesis as well as the calculations made in excel.
|
|
|
Design of air conditioning system of a flat
Vrbický, Jiří ; Zerzaňová, Alena (referee) ; Hejčík, Jiří (advisor)
The diploma thesis is consisting of theoretic part, which deal with used ventilating systems, ways of waste heat recovery and describe basic types of air-conditioning systems. Following part attend to design of ventilating system and multi-split air-conditioning system for flat. Part of design of ventilation system is calculation of noise levels in rooms. Air-conditioner design is based on calculation of thermal stress. Annual demand of cold and heat demand are calculated using TRANSYS software. Design documentation is part of the diploma thesis.
|
|
|
Pedestrian bridge across the river Labe
Libiger, Martin ; Trenz, Jan (referee) ; Nečas, Radim (advisor)
The thesis deals with a design of the river Labe bridging in the city Hradec Kralove. In order to make option for cyclists and pedistrians to cross between shores. There were made three design variants. For detailed solution curved twin-arm arched structure was chosen. The aim of the thesis was design and assessment of Bering strucutre of the footbridge according ultimate limit states and serviceability limit state given by valid Eurocodes.
|
|
|
The development of fire-resistant repair mortars with fine-grained filler
Záruba, Jiří ; Gross,, Tomáš (referee) ; Bydžovský, Jiří (advisor)
The diploma thesis is focused on fire-resistant repair mortar with fine-grained filler. The aim of this work is the research and development of fine-grained Mortars resistant to high temperatures, which are characteristic at the beginning of the fire. The theoretical knowledge with subsequently realized laboratory verification was used. At-tention was paid to the masses based on the mixed binder comprising cement and blast furnace slag, respectively. high-temperature ash. Cellulose fibres were used as the dis-persed reinforcement. Two kinds of aggregate were assessed - fly ash agloporit and am-phibolite incl. combinations thereof. Laboratory tests were carried out via determination of basic material properties (density, strength, consistency, dimensional changes etc.) after exposure to extreme temperatures. A substantial part of the research was also study of different cooling conditions - slow and fast (water and air). Selected formulations were subjected to temperatures up to 1200 ° C. In the conclusion is selected several recipes that have been found to be optimal for continuing research on the basis of the results and findings.
|
|
|
Studying the behavior of concrete at high temperatures
Fiala, Jiří ; Sitek,, Libor (referee) ; Bodnárová, Lenka (advisor)
This thesis deals with the behavior of cement concrete at high temperature with a focus on the impact behavior of aggregate, cement type and polypropylene fiber reinforcement. The theoretical part describes the issue of cement concrete at high temperatures, especially processes in the cement matrix, aggregates and polypropylene fibers. Furthermore, theoretical part describes the selection of a suitable type of cement and aggregates in concrete exposed to high temperatures. In the experimental part was designed the concrete composition with various kinds different types of aggregates and two types of cements. The temperature stress of test samples was performed according to ISO standard temperature curve 834. Subsequently, was made the verification of the physic-mechanical properties such as changes in bulk density and compressive strength after heat load. Moreover, the surface appearance of samples after heat load was evaluated, especially the occurrence of samples, the crack width and explosive spalling. Mineralogical composition changes of prepared samples before and after heat load were observed via X-ray diffraction analysis. Finally, we made a photogrammetry on a test plates after heat load which defined the size of the area and depth of spalling concrete surface.
|
|
|
Effect of building construction on thermal load of space
Výravská, Zdeňka ; Ell, Jiří (referee) ; Tesař, Zdeněk (referee) ; Rubina, Aleš (advisor)
This master’s thesis focuses on effect of outer building construction on thermal load of space. The effect of translucent and non-translucent construction is discussed. The project of air-conditioning system is prepared for the two alternatives of the translucent construction, including the purchase price of the airconditioning system and glazing and the savings on summer cooling. Afterwards the period of the recovery of investment is calculated. The plan of the airconditioning system is connected to my bachelor’s thesis “Airconditioning in the car showroom”, the subject of which was the plan of the airconditioning system of the car showroom.
|
|
|
Behavior of concrete at high temperatures
Dvořáková, Michaela ; Bruckner,, Dipl Heinrich (referee) ; Bodnárová, Lenka (advisor)
The aim of this diploma thesis is to focus on the resistance of concrete exposed to high temperatures especially with focus of resistance against explosive spalling as well as clarifying the mode of action of various types of polypropylene fibres. The theoretical part is an introduction to the issues of explosive spalling, its mechanisms and majority influencing factors. Further description of the processes taking place in the structure of concrete under extreme thermal load, distribution and size of pores in concrete, thermal load, temperature-time curves and their applications, methods of elimination of negative behaviour of concrete exposed to thermal loading (passive and active methods), mode of action of polypropylene fibres and more is also included in the theoretical part. The main aim of experimental part is to verify the function of polypropylene fibers of various Melt Flow Indexes (MFI) and dosage. Primarily, the test samples with content of the PP-fibers are compared to the reference sample without fibers. Secondarily, the samples with standard PP-fibers (with MFI 25) with dosage 2.0 kg/m3 are compared to samples with modified PP-fiber (with MFI 2500) of dosage 0.9 kg/m3. Photogrammetric images were used for evaluation and comparison of spalled surfaces and its depth. Determination of the softening temperature and melting point of the modified and standard PP-fibers was made by using a high temperature microscope video. The second part of the experimental work was to define concrete permeability at different temperatures and pressures. Permeability was measured at temperatures of 20°C, 90°C, 150°C, 175°C, 200°C, 225°C and 250°C and at pressure of 0.2, 0.4 and 0.6 MPa.
|
|
|
The influence of microclimate on the inside glass objects
Dvořáková, Hana ; Ell, Jiří (referee) ; Rubina, Aleš (advisor)
This master thesis deals with the influence of glazing on the microclimate inside buildings. In particular, I focused on the shading coefficient and the various factors that affect it. The thesis also concentrates on the origin and composition of the solar radiation, the formation of thermal stress and refraction. In the next part of the thesis, I focused on designing two variants of shielding factor and its impact on the thermal load of gym, sports hall and the related necessary changes. The last part of the thesis deals with experimental measurements of incident solar radiation passing through the window into real physical model. From the measured values, we determined realistic shading coefficient and then applied it in the previous section of this thesis.
|
|
|
Design of the office structure
Totková, Lucie ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
This thesis deals with the design and assessment of the cooling reinforced concrete ceiling by EC2: Design of Concrete Structures. The introductory part is focused on selected type cooling ceiling system and its detailed description. The important part is dedicated to influence of water temperature on reinforced concrete ceiling structure. In this thesis is included calculation of internal forces, calculation of maximal deflection of the slab and its assessment of the puncture. This task is analysed using the software SCIA Engineer and ANSYS.
|
guest ::
