|
|
Ultra low noise switching power supply
Raba, Jaroslav ; Leuchter,, Jan (referee) ; Šrámek, Petr (advisor)
This thesis deals with the issue of switching power supply in terms of noise ratios in the output voltage. In the theoretical part analyzes the basic principle of classical and resonant topology switching power converters in terms of output voltage ripple and switching noise. There are also some possibilities of compensation to minimize switching noise and output ripple. The second part describes the custom design a low noise switching power supply, which is composed of an active power factor corrector, power converters and ripple limiter. The main power converter is designed as an LLC resonant converter. The last part deals with the actual construction of the proposed source, its measurement and presentation of the results.
|
|
|
Microposition control device
Kokeš, Ondřej ; Bajer, Arnošt (referee) ; Kadlec, Jaroslav (advisor)
Presented thesis analyses a function of the particular type of the nanopositioner with aim to suggest and construct an electronic device suitable for control of the nanopositioner slider. In presented material there is a description of the control signals and possibility of their generating in the respect of slider movement accuracy. The main goal of the thesis is to describe electronic units ranging from power supply, control processor unit part to end part that directly joint nanopositioner. There is also programme equipment for microcontroller and computer, communication description, movement measuring and calibration and draft for the close-up of the control loop for additional increase of the movement accuracy.
|
|
|
Class H audio power amplifier design
Spáčil, Tomáš ; Šebesta, Jiří (referee) ; Dušek, Martin (advisor)
This bachelor´s thesis is dealing with a plan of a low frequency ending amplifier of class H that is made of discreet parts. Content of this work is an explanation of basic terms and classes of ending levels low frequency amplifiers. The ending level in class H is written in detail including its possible kinds of solution. The own solution of amplifier in class H is completed by simulation and areal connectors to individual parts. The aim of this work is a prototype of a final look of a device with record about measurement of its basic qualities and their evaluation.
|
|
|
The inverter based battery charger
Kadlec, Josef ; Pazdera, Ivo (referee) ; Červinka, Dalibor (advisor)
The aim of this master’s thesis is provide detailed information about car battery’s charger with a switching power supply. The kind of this power supply is one-pulsed conducting inverter with transformer. The charger’s rates of nominal voltage are 6 and 12 V. The method of charging is charging by constantly voltage with a current limitation. The values of a current limitations are 0.5A, 5A and 20A. The charger’s maximal current is 50A. This current can help to the accumulator with starting of a vehicle. This device is equipped by indicators which indicate the end of charging.
|
|
|
Push-pull quasi-resonant DC/DC converter with a transformer
Dvořák, Petr ; Vorel, Pavel (referee) ; Martiš, Jan (advisor)
This diploma thesis deals with analysis of function and subsequent construction of a quasi-resonant DC / DC converter 300 V / 50 V for an output of about 1.5 kW. The aim of this work is to test and describe the behavior of an experimental converter at various operating parameters. In the theoretical part, resonant circuits are described, as well as our connection of the resonant converter. Based on the used topology and the simulated behavior of the converter, the individual components of the power circuit and its control and excitation circuit are designed in Chapters 4 and 5. The sixth chapter deals with the construction and testing of the converter, including a description of its behavior. The last chapter contains technical documentation.
|
|
|
Precise adjustable power suplly
Pawlas, Andrzej ; Magát, Martin (referee) ; Kadlec, Jaroslav (advisor)
This bachelor´s thesis deals with the proposing precise switching power supply. This switching power supply works with a maximum of 99 % duty cycle. Input voltage is 12 V and output can be set in the range of 1.2 V - 11.9 V. Current can be a source of burden 0 A - 20 A. The entire power supply is controlled by microcontroller. While addressing the proposal switching power supply have been developed five prototypes. Last prototype works well, but the output appeared significant interference.
|
|
|
DC/DC converter 2,5kW/1500A for resistive heating of iron components
Martiš, Jan ; Knobloch, Jan (referee) ; Vorel, Pavel (advisor)
This thesis deals with the design and construction of a single-phase switching power supply, which is intended for direct resistive heating of iron components. The power supply is especially intended for resistive heating of horse-shoes. The supply is able to deliver an output current of up to 1500 A at a power of up to 2500 W. The first part of this work deals with the design of individual parts of the unit, the second part is focused on construction and testing of the supply and the last part contains technical documentation. The power supply was successfully tested and the required output parameters were met. However some problems do exist, especially with overheating of the output rectifier and with contacting the heated component to the output leads of the supply. These problems will be discussed in the work. The power supply can be used as an alternative solution to classic means of iron heating. The methods and ideas presented in this work can be applied in a design of a similar power supply with high output current, but most of the design rules are valid generally for the given topology.
|
|
|
Controled laboratory voltage suplier
Vít, Tomáš ; Valach, Soběslav (referee) ; Macho, Tomáš (advisor)
The aim of my master’s thesis is the design and implementation of laboratory power supply with output parameters 0-25V and 0-2A and options to manage this resource by elements of the front panel or via a computer control program. Content is the theoretical analysis of the possibility of subsequent theoretical sources suggesting that it verified on the prototype laboratory resources.
|
|
|
Controllable source supplied and controlled via USB
Sedláček, Michal ; Číž, Radim (referee) ; Pavelka, Ondřej (advisor)
Master thesis deals with design controllable switching power source. Device is supplied and controlled via USB bus of PC. The required output parameters are specified by user in a computer application. The teoretical part includes method of USB communication and introduction to switching power sources with focus on a Sepic topologii. The practical part describe individual circuit solution which contains of a complete device. Is analyzed in detail the proposal Sepic converter circuit and controling by microcontroller. The work also includes the design of microcontroller and computer applications. The result of this thesis is a functional device on which is the performed measurement.
|
|
|
Control system for cantilever gates
Koždoň, Ondřej ; Šťastný, Ladislav (referee) ; Bradáč, Zdeněk (advisor)
In this bachelor's thesis is designed and in detail described a battery powered control system for wireless controlling swing gate. This system is designed as a small electronical system with necessary Inputs/Outputs (I/O) an Input for powering from solar cells and it is equipped with requisite software.
|
guest ::
