|
|
Insulation system of synchronous and induction motors for 18kV
Šporcr, Viktor ; Vetiška, Vojtěch (referee) ; Ondrůšek, Čestmír (advisor)
Bachelor’s thesis is divided into two separate sections. First part is concentrated on insulation system of high voltage machines impregnated by vacuum pressure impregnation. This part of semester thesis concisely describes the composition of individual components used for construction insulation systems of air and water cooled rotation machines. Second practical part contains evaluation of dielectric resistance of coil set with insulation system designed for voltage level 18 kV. This part contains a short description of used insulations. Further includes a report of dielectric tests of used coil set. This set of coils was tested on following tests. Heating measurement semi conductive tape with infrared camera at impulse voltage. The coils was exposed to impulse voltage for one 100 hours and sinus voltage for one 1000 hours. Before and between, aging was measured value of charge partial discharges and dissipation factor.
|
|
|
Metal detector for industrial use
Stehno, Rostislav ; Friedl, Martin (referee) ; Szabó, Zoltán (advisor)
The goal of this project is explore and study the ways of metal detecting and create a metal detector for industrial use. During a project development, the device size and user easy interface were the basic requirement. As a visual device was chosen LCD touch display, which is very important as a user-friendly interface. For math calculations and right function of device will be implemented microcontroller from Atmel corporation. As a data storage will be used a flash memory with 16MB of size. When the device were inventing, a lot of methods were studied and the impulse detect method were chosen which is the most perspective way of metal detecting. Device will communicate with PC trough a USB port. The device will have a battery which allows device to run for a few hours. The prototype of PCB were developed. Few mistakes has been discovered, while the device were constructed, but they were solved successfully.
|
|
|
System of controlled generators of rectangular pulses
Holeksa, David ; Mišurec, Jiří (referee) ; Hanák, Pavel (advisor)
This bachelor thesis deals with the design system of controlled generators of rectangular pulses, which are burdened with toroidal coils. The objective is realization of the equipment to be controlled by a microcontroller, which will bring rectangular pulses to each coil according to pre-specified parameters. The resultant generator is capable of generating current pulses having an amplitude of 0.1 to 1 A and a pulse time of 1-10 ms.
|
|
|
Velocity pickup
Konečný, Jan ; Pikula, Stanislav (referee) ; Beneš, Petr (advisor)
This bachelor thesis deals with a proposal of a sensor for measuring relative oscillation of two interacting surfaces. The thesis describes two possible solutions with their advantages and disadvantages, and a patent research. The main part of this bachelor thesis concentrates on inductive position sensor – its attributes and practical proposal.
|
|
|
Analytic represantation of AC winding properties
Kubín, Tomáš ; Skalka, Miroslav (referee) ; Ondrůšek, Čestmír (advisor)
My bachelor thesis deals with the issue of overview diagram of magnetic fields of basic free-phase winding. It is divided into four parts.The first part focuses on basic winding types and types of their connection. The second part describes the issue of analytic calculation of the magnetic field intensity in the air gap of rotating machines. This description is easier and faster than modern method of final elements in some cases because it displays course of particular harmonics and their partial sums for selected magnetic fields. The third part presents Görges diagrams of basic winding types and finally there is a calculation of the winding factor shown on two examples in the fourth part.
|
|
|
Metal detector for industrial use
Stehno, Rostislav ; Hrabina, Jan (referee) ; Szabó, Zoltán (advisor)
The goal of this project is explore and study the ways of metal detecting and create a metal detector for industrial use. When the device were inventing, a lot of methods were studied and the impulse detect method were chosen as the most perspective way of metal detecting, thanks to a huge electronics parts possibilities. After experiences with preceding device was necessary to redesign it. Main target of this thesis is to increase the computing power of detector. For this purpose will device need a new microcontroller. Device will communicate with PC trough a USB port. The device will have a battery which allows device to run for a few hours. Processing of measured data will be make even with DFT which will lead to better analyze of mass and type of conductor under device.
|
|
|
Inductive position sensor
Volf, Lukáš ; Vorel, Pavel (referee) ; Huták, Petr (advisor)
In the beginning is given an overview of sensors and their separation and properties. This work also deals deeper with inductive sensors. The work is designed for evaluation of the oscillator circuit (binary inductive sensor), its practical implementation, measuring the sensing range of different metals and measurement evaluation. For those interested, here is a list of literature.
|
|
|
Position Inductive sensor
Kořistka, Petr ; Procházka, Petr (referee) ; Huták, Petr (advisor)
Bachelor thesis deals with desing and construction of the inductive sensor. It shortly describes the history, advantages and disadvantages. Next there is developed principle of basic sensors working on the basis changes of inductivity and qualities of scanned materials. Major part of work was desing of individual parts of sensor essential to its correct function. It includes oscillator, rectifier, PI regulator, supply of tension and evaluation circuits. In the practical part was suggested PCB for individual parts of sensor. Measurement and processing of results were done.
|
|
|
Planar Circuits Elements on Low Temperature Cofired Ceramics
Kosina, Petr ; Dřímal, Jiří (referee) ; Kolařík, Vladimír (referee) ; Šandera, Josef (advisor)
The present work deals with the design and manufacturing of 3D structures in LTCC (Low Temperatue Cofired Ceramics) technology. To use this technology LTCC workplaces have been designed and technological processes for high quality reproducible production were suggested. Technological possibilities of low temperature co-fired ceramics were demonstrated in the design and manufacturing of pressure sensors, electrode systems for ozone generators, planar circuit elements (coils and transformers) and in the design a special package for middle-power terahertz modulator. Design of selected parts of respective devices was proved by simulations in COMSOL Multiphysics. The work provides new insights into the structure of power integrated circuits sleeves and structure of electrode systems for different types of electrical discharges. Results of this work can contribute significantly in the application of planar circuit elements, in the development of different types of sensors, in the design of atypical types of packaging or in the design of electrode systems for capacitive coupled electrical discharges.
|
|
|
Trailer frame VARIANT for transport cabel spools
Buchta, Vladislav ; Kašpárek, Jaroslav (referee) ; Kašpárek, Jaroslav (advisor)
Thesis deals with the truck frame VARIANT 252. The main task is to analyze weighting states, setting the values for weigting states. Strength control of the frame by using the Finite Element Method (FEM). And each subsequent frame adjustments based on the results of FEM. Part of this thesis is also the drawing documentation provided a modified frame assembly and each modified components.
|
guest ::
