National Repository of Grey Literature 46 records found  beginprevious37 - 46  jump to record: Search took 0.01 seconds. 
Static analysis of one joint of timber structure
Sedlák, Petr ; Gratza, Roman (referee) ; Kytýr, Jiří (advisor)
This diploma thesis deals with the numerical modeling of the nail joint of the timber roof structure and it is based on the already realized physical experiment. Totally twelve various solutions, where the isotropic and ortotropic characteristics of the spruce timber and steel components change, have been created. The final values of the joint shift obtained by using of the numerical modeling are compared with results of physical experiment. Program system ANSYS is used.
Mountain hotel in Beskydy
Kubášková, Barbora ; Buchta, Stanislav (referee) ; Šmak, Milan (advisor)
This thesis solves design of timber structure of mountain hotel in Beskydy. The hotel is two-storey building with residential attic and no cellar. The ground plan of the building is about 15x26 m and height of the building is 14,76 m. The type of roof timbers was chosen from two options. There was used structural timber of the strength class C24, glued laminated timber of the strength class GL24 and steel S235. Program Scia Engineer was used for the static analysis of the structure. There was made only linear calculation.
Roof structure of construction for social purposes
Bašista, Ján ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The work treats the static recalculation of an existing roof structure of a construction for social purposes and proposes two variants of the design of a new roof structure. The construction has a rectangular ground plan of 30 m x 47 m and the roof structure is placed on the load bearing circumference concrete walls. Except for the load constituted by the function of the construction and by the climatic area, an extra load of 2 tons suspended at any place of the structure is considered because of the special requirement of working and technological equipment. The variant no. 1 is designed from the steel S355. The variant no. 2 is designed as a combination of the wood GL24h and the aluminium EN-AW 5083. Both of the variants have 11 transverse load bearing girders. The purlins are perpendicular to the girders and are placed on them. Stiffness is secured by roof stiffeners.
Steel Load-bearing Structure of a Car Showroom and Repair Centre
Thomanková, Lucie ; Buchta, Stanislav (referee) ; Bajer, Miroslav (advisor)
Diploma thesis includes design and examination of steel load-carrying structure. Construction includes car deal warehouse and car repair shop with extension for car varnishing. Car deal warehouse has ground dimensions 22 x 30 m and total high 10 m. Main frame is composed of Vierendeel trusses with arc shape. Car repair shop has ground dimensions 20 x 30 m and total high 10 m. Main frame is composed of truss girders and web-plate columns. Frame extension has ground dimension 20 x 10 m and total high 6,4 m. Cladding is composed of sandwich panels. Store´s gable wall and a part of the roof are glass. Climatic load is intended for locality Ostrava.
Joining components by forming technologies
Hudeček, Marek ; Šlais, Miroslav (referee) ; Peterková, Eva (advisor)
The project elaborated in frame of bachelor's degree B-STI gives an overview about methods of joining parts primarily made from sheet. Most of these methods are implemented by cold forming technology without machining. In great detail is described joining parts from sheet using technology of seaming in bachelor thesis. Using a new materials in production and requirements on decrease cost require application modern way of joining, some of them are mechanical coupling procedures and joining by deformation strain.
Steel Structure of Multipurpose Hall
Vošček, Martin ; Buchta, Stanislav (referee) ; Hron, Lukáš (advisor)
Theme of this bachelor thesis is calculation and design of steel load bearing structure. The plan of the multipurpose hall is in rectangular shape with the width of 28m and length of 46m. The roof is in circular arch shape. Whole structure is designed from S355 steel. Structure is situated in Brno and is designed according the Eurocodes.
Study of static behaviour of selected agricultural objects
Horský, Vojtěch ; Zídek, Rostislav (referee) ; Brdečko, Luděk (advisor)
This thesis deals with the study of static behavior of agricultural buildings, evaluating their existing state using two-dimensional and three-dimensional construction models. Elements that serve to improve static effects of constructions are implemented into these models or replace the currently used elements. Strains of the modified constructions are calculated are applied to qualify the implemented elements and designed joints.
The roof structure of a bus station with facilities in Vrchlabí
Vondráček, Vít ; Hron, Lukáš (referee) ; Šmak, Milan (advisor)
The subject of bachelor's thesis is design and assessment of steel load-bearing construction of bus station in Vrchlabí. It is designed as a co-operating load-bearing steel pillar based structure with the construction of the outdoor platform. The design was considered in four different options for inner building. Followed was mainly the weight of inner structure with respect to the roof deck. The selected option is then incorporated into the scope of the entire structure. Design and assessment was conducted in accordance with the applicable standards and by using a computer program Scia Engineer.
Návrh konstrukce zvětšovacího jídelního stolu s neměnnou výškou plochy po rozložení
Stádník, Jiří
The thesis deals with structural proposal of unfoldable dining table that has the same height after the unfolding. The structure designed was created with the knowledge gained from theoretical studies about this issue and after the market research on unfoldable dining tables in the Czech Republic. The proposal was made in accordance with ergonomic, safety and technical requirements put on dining tables. Particular design of the structure is made in the form of technical drawings including list of materials, technical-economic standards and material costs of the product.
Návrh nábytkového prvku vhodného pro CNC výrobu
Zahradníček, Ondřej
This dissertation deals with the design of conversation chair intended for production on CNC machines. It contains not only a study of the theory of the given issues, but also a practical part describing procedures during problem solving. It includes also a public opinion survey aimed at sitting furniture. The concept of the construction of chair is based on its disassembling qualities. This requires a creation of concept of a suitable joint and its testing on samples. As a conclusion a prototype of the final design of the conversation chair is made, which is evaluated on the basis of the fulfillment of the goals demanded.

National Repository of Grey Literature : 46 records found   beginprevious37 - 46  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.