|
|
Manufacture of a prototype component by rapid prototyping method
Křupka, Marek ; Stachovec, Ivo (referee) ; Kosour, Vojtěch (advisor)
This thesis describes the production of a prototype component of the bicycle crank with FDM Rapid Prototyping method. Initially, production methods of this component, using different ways of Rapid Prototyping are summarized. The main part of the thesis focuses on the production process from the initial design to the final wax model, which can be used to manufacture metal components. The conclusion compares the component production using standard technology with the one using Rapid Prototyping.
|
|
|
Application of rapid prototyping technology in the investment casting technology
Čejka, Libor ; Mikulka, Vít (referee) ; Kosour, Vojtěch (advisor)
To accelerate the production of prototype castings, it is necessary to shorten the time required for the production of investment casting, allowing just the Rapid Prototyping technology. This technology is being developed for several decades, but the application of the method of lost wax model is completely normal. Task of the thesis is to develop a literature search possibilities of mapping technology in Rapid Prototyping technology foundry investment casting wax model.
|
|
| |
|
|
Production of the car gearbox using Fused Deposition Modeling method
Štěrba, Ondřej ; Nejedlý, Jindřich (referee) ; Sedlák, Josef (advisor)
The aim of this work is creating a virval model of the car gearbox . The gearbox from the car Skoda Felicia was used to create the individusl parts into a final assembly. Construction of the assembly model and the layout have been implemented inAutodesk Inventor, which is a software CAx application. Final production was performed by Rapid Prototyping Technology, using the Fused Deposition Modeling equipment uPrint from ABSplus material for the purpose of visualization. The final verification was assemblin single patrs of the gearbox, including ensurance its functionality.
|
|
|
Manufacturing of consumer accessories using rapid prototyping technology
Koubek, Michal ; Dvořáček, Jan (referee) ; Sedlák, Josef (advisor)
My bachelor thesis is focused ou the production of applied supplements not commonly available. The applied supplements were modelled by Autodesk Inventor graphic program, transferred to, outcoming format of data and them produced by Rapid Prototyping technology by using fused deposition modelling aditive method. The part of my thesis i salso production of silicon form of chosen part by means of vakuum moulding system. My thesis is finished by technical and economical evaluation comparing the price, for which these supplements can be obtained in the market or produced by means of 3D printed uPrint by using fused deposition modelling method, which is available at Brno Universit of Technology – Faculty of Mechanical Engineering.
|
|
|
Usage of modern technologies for manufacturing the blades of fishing baits
Barcuch, Jakub ; Dvořáček, Jan (referee) ; Sedlák, Josef (advisor)
The aim of this thesis was to design a number of blades for fishing baits in 3D parametric CAD system Autodesk Inventor 2010 and their production with using the additive technology of Rapid Prototyping. The method Fused Deposition Modeling will be used to produce the master model blades. The silicon molds for the production of resin casings will be created for blades with compliant properties. The work contains an overview of commercially available Rapid Prototyping methods, their brief description, advantages and disadvantages.
|
|
| |
|
| |
|
|
Production of handbrake component of the car using the rapid prototyping technology
Drbola, Vladimír ; Matuška, Martin (referee) ; Dvořáček, Jan (advisor)
Bachelor thesis is mainly focused on manufacturing of hand brake component for Fiat Stillo using method Fused Deposition Modeling. Introduction part contains a brief description of Rapid Prototyping technology. Practical part of the work is based on modeling of real component of handbrake, whose fastener part has been damaged. In the work is also description of the necessary modifications for the production of model by FDM method. Production of the component has been performed on Dimension uPrint FDM printer. The final part contains an assessment of production costs compared to price of the product in retail stores.
|
|
|
Realization of the plastic holder of the car navigation
Pavlík, Ondřej ; Nohál, Libor (referee) ; Paloušek, David (advisor)
The goal of this bachelor´s thesis is suggestion and manufacture of the plastic holder of the car navigation. The literature retrieval part contains gathering of information about external holders of the car navigations and description of prototype manufacturing method. The construction part is an accompanying report of suggestion and manufacturing of the car holder. 3D CAD Model is created in parametric modeller via Autodesk Inventor Professional 2010. The holder is then made via Rapid Prototyping FDM technology.
|
guest ::
