|
|
The Design Methods of Equipments for Audio
Kondler, Radim ; Vrba, Kamil (referee) ; Mišurec, Jiří (advisor)
The work is focused on equipment used in audio, such as a loudspeaker crossovers, amplifiers and preamplifiers. There are theoretically described loudspeaker crossovers, their parameters, types of structures derived from the frequency filters with their parameters. Further deals about audio amplifiers and both voltage and power, their theories, parameters, and distribution.
|
|
|
Design of class-D audio power amplifier
Fiala, Roman ; Götthans, Tomáš (referee) ; Brančík, Lubomír (advisor)
This semestral thesis describes class D low frequency power amplifiers and design of specific 2x100W class D power amplifier. The designed amplifier contains a second order sigma-delta modulator in which the quantization is controlled only by the delay of modulator components. This design does not include the clock generator which usually controls the quantization in sigma-delta modulators. This semestral thesis also includes design of a switched-mode power supply for the power amplifier and for the preamplifier. The PSpice program has been used for the design and verification of some sections of circuits. All designs have been built. Also basic parameters of completed circuits were measured.
|
|
|
Mixing board with class-AB output amplifier
Krolák, David ; Šotner, Roman (referee) ; Brančík, Lubomír (advisor)
Bachelor thesis deals with the type of mixer preamplifier with active tone control for each of four inputs. This preamplifier is used at dance parties, concerts and recording songs if it equipped with a line output for recording device. The thesis also includes design of power amplifier in class AB with output power 2 × 100 W at 8 nominal load, simulations and a summary of the results.
|
|
|
System of controlled generators of rectangular pulses
Holeksa, David ; Mišurec, Jiří (referee) ; Hanák, Pavel (advisor)
This bachelor thesis deals with the design system of controlled generators of rectangular pulses, which are burdened with toroidal coils. The objective is realization of the equipment to be controlled by a microcontroller, which will bring rectangular pulses to each coil according to pre-specified parameters. The resultant generator is capable of generating current pulses having an amplitude of 0.1 to 1 A and a pulse time of 1-10 ms.
|
|
|
Design of switching class audio power amplifier
Bronec, David ; Kratochvíl, Tomáš (referee) ; Brančík, Lubomír (advisor)
This bachelor thesis is dealing with the issues of the switched category output amplifiers and its aim is to design and to construct a stereo amplifier with the energy output about 100W. The amplifier is constructed in the switched category D. The design of the corrective preamplifier with the correction of depths, heights and the balance functions is also described. Furthermore, this thesis deals with the description of the switched power supply with the TOPswitch control circuit. The design is also supplemented by the simulations and the printed circuits of each part. There are also some photographs of the device and the measurement protocol is included too.
|
|
|
Quadrophonic audio amplifier for home use
Gavlák, Antonín ; Kratochvíl, Tomáš (referee) ; Brančík, Lubomír (advisor)
This bachelor work describes the design quadraphonic audio amplifiers for home use that works in class AB. The proposal includes a correction preamplifier integrated circuit LM1036 and power amplifier monolithic integrated circuit LM3886 to the output impedance of 8 with appropriate cooling power element. The work also deals with suitable power supply units and soft start circuit for the amplifier. The work contains materials for the construction of a functional prototype of the low-frequency power amplifier and the results of laboratory measurements.
|
|
|
Design of class AB stereo audio power amplifier
Podr, Michal ; Šotner, Roman (referee) ; Brančík, Lubomír (advisor)
This thesis describes the design of a complete amplifier operating in class AB. It contain two power amplifiers with working in the bridge mode correction amplifier with volume control, bass, treble, and also with the choice of loudness. Preamplifier with three different inputs and the choice between stereo and mono modes.
|
|
|
Class H audio power amplifier design
Spáčil, Tomáš ; Šebesta, Jiří (referee) ; Dušek, Martin (advisor)
This bachelor´s thesis is dealing with a plan of a low frequency ending amplifier of class H that is made of discreet parts. Content of this work is an explanation of basic terms and classes of ending levels low frequency amplifiers. The ending level in class H is written in detail including its possible kinds of solution. The own solution of amplifier in class H is completed by simulation and areal connectors to individual parts. The aim of this work is a prototype of a final look of a device with record about measurement of its basic qualities and their evaluation.
|
|
|
Design and construction of audio power amplifier
Růžička, Jaroslav ; Kratochvíl, Tomáš (referee) ; Brančík, Lubomír (advisor)
This bachelor’s thesis is concerned with amplifier classes, integration end-level, protective circuits and concrete concept of class AB power amplifier, including concept of preamplifier and power amplifier. Features of designed circuits were simulated in PSpice software. These individual concepts of modules are connected with DPS. This thesis contains results of measurement and photos of amplifier.
|
|
|
Simulation and implementation of the audio power amplifier
Svadbík, Pavel ; Kratochvíl, Tomáš (referee) ; Šotner, Roman (advisor)
This work deals with simulation and analysis of audio power amplifiers of various concepts and classes. The theoretical part presents the basic necessary knowledge of electrical concepts and principles necessary for mastery of issues that this work deals. For each simulated circuit are described the basic operating principles and evaluated the results of the analysis. Based on the results of the analysis is chosen circuit, which is experimentally realized and measurement. In conclusion discusses the parameters obtained by simulations and practical measurements, and are fully assessed characteristics realized amplifier.
|
guest ::
