|
A study of electric vehicle recharging
Solař, Adam ; Kučera, Pavel (referee) ; Píštěk, Václav (advisor)
The subject of this thesis on the topic of the study of the electric vehicle charging. The aim was to draw up a research study on the history of the electric vehicles, the options of their charging and to assess the availability of the charging points in our country and abroad. Additionally, this study provides overview of the electric vehicles available on the market and the types of charging devices and charging options. In conclusion, a large number of the ways and charging types were discovered. Furthermore, we calculated the approximate charging time with regard to the type of charging device and convenience of the charging points. This work also mentions some disadvantages of the electric vehicles, such us the long charging time, charges for the fast charging station use or currently high retail prices of these cars. Despite the prevailing drawbacks, the electric cars are becoming more visible on the roads.
|
|
Intelligent charger for lead-acid accumulators 12V/130A with an option "start-car"
Láznička, Martin ; Červinka, Dalibor (referee) ; Vorel, Pavel (advisor)
This bachelor's thesis is considered on a basic description of car battery charger with a support function “start-car”. A switching power supply creates a base of the equipment-this is why the charger is compact and easily portable. It is designed for 6V and 12V batteries. A charging by a constant voltage with a current limitation (to 0.5A, 5A or 20A) is used. The charger maximal current is 120A for a short-term load, so a proposal of an appropriate thermal protection is included in the project.
|
| |
|
Design of construction, control and electronics for unstable balancing vehicle
Zouhar, František ; Krejčí, Petr (referee) ; Grepl, Robert (advisor)
Thesis deals with design of construction, control and electronics for unstable balancing vehicle. The rst part is focused on the determination of requirements for the function and then design and manufacture of structure in line with set requirements, including 3D models and drawings. The second part is devoted to the creation of simulation models of vehicles using the Lagrange equations of the second kind and using SimMechanics. Also PID and LQR regulators are designed, including the advantages and disadvantages of each regulator for this application. The last part is focused on electronics necessary to vehicle operating. They are mainly power electronics (H-bridge, battery charger, switching supply of voltage board). There are also necessary calculations, complete PCB design and a description of the rmware for the this specifc device.
|
|
Intelligent charger for Pb accumulators
Hadwiger, Tomáš ; Šebesta, Jiří (referee) ; Kratochvíl, Tomáš (advisor)
This bachelor project deals with lead accumulator charging. The properties of this acumulator charger are described here and the best possible way of charging has been based on these properties. The capacity of the accumulators has also been taken into account. The charger itself is able to distinguish between the twelve-volt and the six-volt accumulator. The charger prevents accumulators from overcharging and does not charge damaged ones.It also contains the protection against reversing polarity. The project contains complete scheme, DSP layout, lists of components and their placement on the DPS. The design of the transformator suitable for the charger is also included.
|
|
Uninterruptible Power Supply
Mrázek, Petr ; Harabiš, Vratislav (referee) ; Chmelař, Milan (advisor)
The thesis deals with Uninterruptible Power Supply (UPS) and associated problems of backup power in case of unexpected outages of electricity. Start of work is dedicated to limitation of the electricity supplies, as well as their causes and consequences. Furthermore, brief history of UPS and subsequently distinguish between UPS’s architectures. There is also a description of the energy sources such as batteries, flywheels or fuel cells. Part of thesis describes security of electricity supply in health care facilities, including requirements for emergency power. The own design of UPS is described in the end.
|
|
Car-battery charger
Kadlec, Josef ; Procházka, Petr (referee) ; Červinka, Dalibor (advisor)
This bachelor’s thesis is considered by projection and construction of the car battery charger with switching source. One-pulsed conducting changer is base of this charger. The charger is intended for accumulators of nominate voltage 6 and 12V. Accumulators are charged by method of constant voltage with current limitation of 0.5A, 5A, 20A and 50A. Value 50A has reason during stating of car for example in winter, because the charger helps to battery. The device is equipped with additional protection, which protects the charger and also the accumulator and the supply network. Three pilot lights are the next equipment of the device.
|
|
Lead Acid Battery Charger
Jeleček, Ondřej ; Tonar, Karel (referee) ; Tošer, Pavel (advisor)
This diploma thesis is focused on design of lead acid baterry charger. First chapters describes the charging and discharging principes. This paper also shows basics types of lead acid batteries, their distribution depends on maintenance and part connected to the processes connected to the charging and discharging of the acumulators. Following part is focused on theoretical design of the charger with set up of parameters. Diploma thesis also contains comparsion of requested and real parameters of the charger.
|
| |
|
The inverter based battery charger
Kadlec, Josef ; Pazdera, Ivo (referee) ; Červinka, Dalibor (advisor)
The aim of this master’s thesis is provide detailed information about car battery’s charger with a switching power supply. The kind of this power supply is one-pulsed conducting inverter with transformer. The charger’s rates of nominal voltage are 6 and 12 V. The method of charging is charging by constantly voltage with a current limitation. The values of a current limitations are 0.5A, 5A and 20A. The charger’s maximal current is 50A. This current can help to the accumulator with starting of a vehicle. This device is equipped by indicators which indicate the end of charging.
|