|
|
Multipurpose Sport Hall
Rusoňová, Nikola ; Hron, Lukáš (referee) ; Buchta, Stanislav (advisor)
Subject of this thesis is to design and evaluate the multipurpose sports hall for a permanent,climate and traffic load. Light range of construction is 42,900 m, clear height at its highest point is 10,824 m. The construction is located in Brno. The main load-bearing elements of constructionare two-juncture arcs of constant cross-section of glued laminated timber class GL24h, axially remote 3,000 m. Trusses are transversely connected by purlins from solid wood for strengthclass C20 axially remote 1,100 m. The entire construction is braced by four transverse bracing,consisting of a rods system.
|
|
|
Structure of The Showroom
Trojanová, Lenka ; Röder, Václav (referee) ; Buchta, Stanislav (advisor)
This thesis describes the design of wooden substructures Motor Show. This constructionis located in South Moravia in Brno area. The dimensions are 33 mx 49 m and height from ground to top is 15.5 m The main structure is unbalanced arc of glued laminated timber, constant section height. Length of the arch is 39 meters. For the design of bearings, connections and contacts have been used steel elements. The concrete columns are stored using the arc tangent bearings. Front and side (east) side have a glass facade, glass is the antisun and security properties are opposite sides of the brickPOROTHERM 40th The structure was modeled in the SCIA ENGINEER 2011th The structural analysis was performed manually.
|
|
|
Technological phase of the cover ground object
Fatura, Josef ; Čech, David (referee) ; Henková, Svatava (advisor)
Thesis resolves civil technological stage of the roofing of the administrative buildings and warehouse halls in the Grand River. It deals with the structure, roof insulation, nekrokevní, klempířskými and povlakovou-covering elements. The work contains technology rules, a statement of the Bill, the timetable, drawings and other technological documentation stage.
|
|
|
The steel structure of a shelter
Kuba, Cyril ; Hron, Lukáš (referee) ; Štrba, Michal (advisor)
A new steel structure of a gas station. Shape and dimensions design. Determination of innerforces and dimensioning of main bearing elements for two variants. Comparison of variants. Structural analysis of the choosen variant. Section plan of steel structure is 12 m x 18 m. Choosen variant is created by beams, purlins and columns. Height of construction is 4,10 m.
|
|
|
The steel roof structure of a sport hall
Frank, Ivo ; Barnat,, Jan (referee) ; Štrba, Michal (advisor)
The subject of this bachelor’s thesis is to design the steel roof structure of a sport hall in the area of city Jihlava. The plan dimensions of the structure are rectangural 45.200 x 40.300 m. The height of the structure is 15.150 m. The hall is designed by cylindrical roof. The main load bearing structure is created by arch lattice frame. The width of the frame is 40.300 m. The spacing of frames is 9.000 m. Frames are connected by lattice purlins‘. Purlins’are arranged radially. Longitudal rigidity of the structure is provided by transverse wind braces and upper beams of the purlins‘. Roof covering is made of roof panels laid directly on the purlins‘. The cladding is made of panels too. In the front of the structure is the cladding made by self-supported structure, which is not part of this thesis.
|
|
|
Two Bay Industrial Hall
Hetmer, Jakub ; Buchta, Stanislav (referee) ; Bajer, Miroslav (advisor)
This bachelor´s thesis "two-bay industrial hall" is processed in the form of project documentation according to applicable regulations. It is a steel hall. It is designed as a single-storey, two-bay with a gable roof. The hall is located in Brno. Main structure consists of planar cross coupling, which is stored on restraint articulated columns. The construction is designed 9 cross ties and spacing of individual bonds is 6.0 m in the extreme lateral links are hinged mounted columns with stored axial length 6.0 m, which are secured lattice bracing longitudinal forces from the effects of wind. All columns are stored on concrete footings. In the longitudinal direction of the object is reinforced by transverse glue press in the plane of the roof and walls. Lateral bracing is located in the outer fields of the structure. Purlins and side runner are statically designed as simple beams, stored in the longitudinal direction of the transverse links and columns.
|
|
|
The roof structure of a multipurpose sport hall in Brno
Grussmann, Jan ; Pilgr,, Milan (referee) ; Šmak, Milan (advisor)
Bachelor´s thesis describes the design and static assessment of the main roof structure supporting elements of the multipurpose sport hall in Brno. It is the emphasis on the optimization of the proposal in terms of material consumption. Curved girders made of glued laminated timber and on the edge connected rafters forms together the cross-link structure. Basis of OSB sheathing carrying the roof deck is secured by the orthogonal grid system purlins and rafters. The static calculation also includes fire resistance reports of single elements.
|
|
|
Sports hall
Návarová, Michaela ; Doc.Ing. Bohumil Straka,CSc. (referee) ; Sýkora, Karel (advisor)
The thesis proposal is developed wooden structure sports hall. The hall is designed for general sports (handball, football, tennis, volleyball, basketball). Plan dimensions of the hall are 26,5 m x 45 m and variable height.The structure is designed for the České Budějovice. Carrier enclosure is designed from the glued laminated wood with axial distance of 3 m Purlins are designed as simple beams with axial distance of 2,5 m and PUR sheathing panels are used. Articulated connection is made with steel pivotal connections.
|
|
|
Steel structure of botanical pavilion
Ducheček, Jan ; Barnat,, Jan (referee) ; Röder, Václav (advisor)
Work called Supporting curved construction of botanical pavilon is developed as realization documentation. The building is situated in an area with low vegetation, where the hight of sorrounding buildings do not exceed 5 metres. Construction of a triaxial ellipsoid shape has a layout dimensions of 42,5 x 30 m and 7,3 m surge. Roof cladding is made from textile sheets from PTFE fibers, which are anchored to the trusses. The translucent textile sheets are used to achieve optimum conditions for plants that are grow inside. The supporting construction is made of glued laminated beams, which are tilted by 45 degrees and alternately fit together. Emphasis is placed on visual design of construction.
|
|
|
The Roofing of Terraces of a Stadium
Bartoň, Radek ; Sýkora, Karel (referee) ; Puchner, Josef (advisor)
My task was to propose and consider steel structure of roofing of a terraces on an athletic stadium. Terraces, with the ground-plan dimensions 12,0 x 80,0 m, are designed as a reinforced concrete structure and its structural analysis is not included in this thesis. Construction is situated in area of Rožnov pod Radhoštěm, which meant, It had to be accounted with considerable variable loads (wind, snow), which is associated with enlargement of a cross-sections. Cross sections of the main elements were proposed and considered and also selected joints and details of the structure. Assigned drawings are included in attachments of the thesis.
|
guest ::
