|
|
Wireless data collection form engine control units
Procházka, Miroslav ; Kejík, Petr (referee) ; Prokopec, Jan (advisor)
This thesis deals with implementation of a wireless interface for a module providing communication between computer and electronic control unit of an automobile. The 802.11 standard, wireless network structures and MAC sublayer were described. The thesis suggests selection of the most suitable WLAN module, testing of module's features used and the WLAN module implementation. Modifications for the next device version were developed and programs for device operation were implemented.
|
|
|
Remote-controlled switching of information systems - part II
Prečan, David ; Kapoun, Vladimír (referee) ; Herman, Ivo (advisor)
This bachelor´s thesis deals with remote communication over Ethernet interface. First, a brief survey of the existing solutions is presented. Then a remote temperature measurement using data transmission over Ethernet network is proposed. The proposed solution is described in detail including hardware and software design of an equipment for data transmission and evaluation that is based on ATmega 162/30 processor. This equipment communicates with a PC where the measured temperature is displayed. A functional sample of this equipment, which was used to verify the design, is described.
|
|
|
Communication devices over GSM/GPRS
Prečan, David ; Růčka, Lukáš (referee) ; Herman, Ivo (advisor)
This master thesis deals with a data remote transmission by means of SMS and GPRS technology. The overview of current solutions is presented and then a remote temperature measurement and a data transmission employing a communication module GSM/GPRS TM1 through GSM network using GPRS technology is described. As a response to an impulse, the communication module sends SMS. The technical solution is described in details including HW and SW design of the data transfer and processing equipment using a ATmega 162 microprocessor. This equipment communicates with a server (PC), which displays the measured temperature. A prototype which was used for a validation of the design is also described.
|
|
|
Optimization of data communication over high-voltage lines
Minárik, Peter ; Krajsa, Ondřej (referee) ; Mlýnek, Petr (advisor)
The thesis deals with analysis of the PLC (Power Line Communication) system for data communications through powerlines. In the introduction describes the technology of data transmission through the energy network and is divided into categories corresponding with the explanation of the various specifications and features. Different types of coding, affecting the transmitted signal interference and modulation techniques used in a PLC are also described. The practical part is made up of telecommunications network model with transmission channel realized as additive white noise. The model can setup different types of modulation and coding in relate with the signal to noise ratio and bit error rates. The individual blocks settings are described in detail. The model was simulated. The results of simulation are displayed and evaluated at the end of work.
|
|
|
Error protection of data transmission using BCH Codes
Kašpar, Jaroslav ; Křivánek, Vítězslav (referee) ; Němec, Karel (advisor)
The thesis Data transmission error-protection with BCH codes deals with a large class of random-error correcting cyclic codes which are able to protect binary data and can be used for example in data storages, high speed modems. Bose, Chaudhuri and Hocquenghem (BCH) codes operate over algebraic structures called Galois fields. The BCH encoding is the same as cyclic encoding and can be done with linear feedback shift register but decoding is more complex and can be done with different algorithms - in this thesis there are two algorithms for decoding Peterson and Berlekam-Massey mentioned. The aim of this thesis is to find BCH code which is able to correct t = 6 independent errors in up to data sequence n = 150 bits, then peruse possible realizations of the codecs and set criteria for the best realization, then design and test this realization. This thesis is split into three main parts. In the first part there are encoding and decoding methods of the BCH code generally described. The second part deals with selecting of the right code and realization. There was chosen BCH (63,30) code and realization with FPGA chip. In the last part is described design of BCH encoder and decoder and compilation in the Altera design software.
|
|
|
Software for assuming control over the computer
Kostelník, Jan ; Kouřil, Jiří (referee) ; Polívka, Michal (advisor)
The introduction of this Master’s thesis describes a historical and technological evolution of the terminal application, including its advantages and disadvantages. In the following part, a general description of the services and their understanding are mentioned. The benefits and general advantages of the terminal services are described. For the each type of the terminal service, all the functions, options, exact advantages and disadvantages are described. Consequently, the study of the suitability of the compression is presented. On the demo application, the impact of an excessive (voluntary) loss of information is demonstrated. In the next part, the thesis deals with the most frequently used remote-control applications. The tests and comparisons are made as well. The fifth chapter is the fundamental part of this work. The design approach of the workbench is presented there. Consequently, the design approach and system implementation intended for the supervision and control is described. This system makes the user possible to observe other user’s activities and also to control their workstations. The supervising user can also access their drives and other memory devices, which are located in the monitored workstation. The communication is compressed and encrypted. The symmetric and asymmetric encryption algorithms are used there. In the following part, there are two supplementary applications mentioned – application for the key generating and network file manager. In the end of my work, the results of the performance test and also the design of other improvements are presented.
|
|
|
Data transmission over distribution power networks
Vašíček, Filip ; Mišurec, Jiří (referee) ; Zeman, Václav (advisor)
This thesis brings together information about the data transmission over distribution power networks with a view to the broadband systems. The division of PLC systems is mentioned and the principle and characteristics of PLC technology are described. I was also interested in topology and a description of elements of PLC network. There are presented the two most frequently used systems: HomePlug and DS2. Next section contains an analysis of network architecture, especially the physical layer. The protection of data against errors and the OFDM method are described. There are also analyzed other layers of the network reference model, the mechanism of quality of services and the data encryption using AES. I was also focused on the issues of standardization of PLC, the electromagnetic compatibility and a description of the international project OPERA. In the practical part is processed the concept of the laboratory PLC network with elements of the system Defidev/DS2. Functionality of the network has been tested by measuring of the bit rate on the physical and application layer.
|
|
|
Protection of data transmission against long error bursts
Malach, Roman ; Lambertová, Petra (referee) ; Němec, Karel (advisor)
This Master´s thesis discuses the protection of data transmission against long error bursts. The data is transmited throught the channel with defined error rate. Parameters of the channel are error-free interval 2000 bits and length of burst error 250 bits. One of the aims of this work is to make a set of possible methods for the realization of a system for data correction. The basic selection is made from most known codes. These codes are divided into several categories and then the best one is chosen for higher selection. Of course interleaving is used too. Only one code from each category can pass on to the higher level of the best code selection. At the end the codes are compared and the best three are simulated using the Matlab program to check correct function. From these three options, one is chosen as optimal regarding practical realization. Two options exist, hardware or software realization. The second one would seem more useful. The real codec is created in validator language C. Nowadays, considering language C and from a computer architecture point of view the 8 bits size of element unit is convenient. That´s why the code RS(255, 191), which works with 8 bits symbols, is optimal. In the next step the codec of this code is created containing the coder and decoder of the code above. The simulation of error channel is ensured by last program. Finally the results are presented using several examples.
|
|
|
PLC ? datové přenosy v elektrorozvodné síti
Páter, David ; Jandoš, Jaroslav (advisor) ; Čech, Milan (referee)
Cílem této diplomové práce je seznámit čtenáře s konceptem datových přenosů v elektrorozvodné síti ? PLC (Powerline Communication), provést analýzu současného stavu v PLC oblasti ve světě a v České republice, vyzkoušet možnosti PLC v praxi, identifikovat přednosti a omezení PLC a srovnat PLC s konkurenčními komunikačními technologiemi v České republice. Za účelem dosažení stanovených cílů je diplomová práce členěna na dvě hlavní části ? teoretickou a praktickou. Teoretická část je založena především na analýze dostupných zahraničních a českých informačních zdrojů, týkajících se oblasti PLC, a na následném zpracování takto získaných poznatků. Praktická část diplomové práce pak spočívá v řešení případové studie z českého podnikatelského prostředí.
|
|
|
Metodika hodnocení finančních výkazů a návrh aplikace pro jejich zpracování
Nápravník, Lukáš ; Klas, Jan (advisor) ; Novotný, Jakub (referee)
Jedním ze způsobů, jak přiblížit lidem ekonomické a účetní pojmy, je populární forma spočívající v sestavení žebříčku firem. Tato bakalářská práce se zabývá popisem problematiky spojené s jeho tvorbou. Důraz je v práci kladen na problematiku návrhu aplikace, která bude data zpracovávat a vyhodnocovat. Tato problematika tvoří nejpodstatnější část dokumentu a zahrnuje témata volby vhodné metodiky návrhu, výběru technologií, za jejichž použití bude aplikace implementována, diskuzi možných variant přenosu dat mezi externím zdrojem dat a databází aplikace, a samotný návrh. Prioritně je přitom dbáno na jednoduchost procesu zpracování dat a nízkou náročnost ovládání pro uživatele. Úkol návrhu aplikace pro zpracování a vyhodnocení dat je v práci zasazen do širšího kontextu dalších částí, které projekt sestavování žebříčku zahrnuje.
|
guest ::
