|
|
Modern cutting tools for grooving and cutting-off
Matoušek, Jan ; Fiala, Zdeněk (referee) ; Píška, Miroslav (advisor)
The thesis in question deals with the influence of geometry of the cutting tool with a non-null angle r and of the cutting conditions on change of cutting tool’s overall deformation during the process of cutting-off and grooving. When conducting the experiments the loading of cutting tool was measured, there was created a simple 3D model of the cutting tool based on measured data, the deformation analysis of the cutting tool by the simulation programme ANSYS was performed and on the grounds of established facts there was made a conclusion on attributes of the cutting tool during the process of cutting-off and grooving.
|
|
|
Machining of quenched steels
Kosmák, Jaroslav ; Zemčík, Oskar (referee) ; Chladil, Josef (advisor)
Diploma thesis deals with machining of hardened steels. In the introductory section it is described the physical process of cutting and basic used technologies of machining. The next chapter provides an overview of cutting materials. Other chapters deal with the workpiece material and heat treatment. Furthermore, there is made a comparison of the cutting conditions while machining of hardened steels by tools from selected manufacturers. As the conclusion there is the economic evaluation.
|
|
|
Optimization of the production process of a precision machined part
Kolomý, Štěpán ; Sedlák, Josef (referee) ; Píška, Miroslav (advisor)
This master‘s thesis deals with optimization of cutting conditions when machining of precise parts in mass production. In experimental part of this thesis is a comparison of the roughing tool with indexable cutting inserts with the new implemented milling cutter. Tool wear of both roughing tools has been analysed. The surface roughness analysis after machining with the face milling cutter was performed. The output of this work is to obtain optimal cutting conditions to gain a minimum surface roughness.
|
|
|
Superhard cutting materials and theirs effective use
Martincová, Zdeňka ; Polzer, Aleš (referee) ; Humár, Anton (advisor)
Diploma thesis is intended on a polycrystalic diamond and a pocrystalic cubic boron nitride from the standpoint of their description, physical, mechanical and cutting properties, use and contemporary trends of development at renowned producers of tools and tool materials. The aim of the work was a complex working of conditions (type of cutting material, cutting conditions), which are recommended by choice producers for the effective turning applications their kind of superhard tool materials.
|
|
|
Cutting ceramics and its effective use
Podešva, Lukáš ; Dvořáková, Jana (referee) ; Humár, Anton (advisor)
In the first part of this diploma thesis there are discribed basic findings about cutting ceramics (sorts, notation, structure, physical-mechanical properties, using, production) and it evaluates this tool material from the aspect of cutting power. The second part focuses on complex data processing about assortment of ceramics cutting materials of significant tool materials producers and comparison of service conditions (kind of mechanided materials, cutting conditions), which are recommend for effective turning by producers.
|
|
|
Technological conditions application superhard material
Jelínek, Adam ; Kalivoda, Milan (referee) ; Prokop, Jaroslav (advisor)
Diploma thesis is intended on the aplication of superhard cutting material which contain polycrystalline diamond and cubic nitro nitride boron. There are solved area of using superhard cutting materials, optimal cutting conditions, technilgic – economic view and reached parameters during cutting (roughness, geometric tolerance). The aim of this is to define what are an achieved parameters
|
|
|
Technology of a selected part of the vacuum pump
Lišková, Tereza ; Kučera, Lukáš (referee) ; Chladil, Josef (advisor)
The content of study is related to reducing the production times of milling of aluminum component of vacuum pump. The primary aim of the thesis is to experimentally verify the proposed cutting conditions when milling the rotor blades and then evaluate them according to predetermined parameters. The output is reducing machining time with respect to cost, tools and machine.
|
|
|
Comparison of the drilling process on samples of material
Furch, Michal ; Dvořák, Jaromír (referee) ; Kalivoda, Milan (advisor)
According to the name we can judge, that this research work is interested in comparing drilling technologies. The introduction of work includes different types of tools and machines to production interior rotated holes, another part continues with dissertation about drilling preparatory and tools materials. The end of work describes the experiment about drill interior rotated holes.
|
|
|
Coated cemented carbides and their effective use
Pavlovský, Tomáš ; Dvořáček, Jan (referee) ; Humár, Anton (advisor)
This thesis deals with coated cemented carbides, which are used for the manufacture of cutting tools. The introductory section provides an overview of the most common tool materials. The main part focuses on the production of coated SK, coating methods, types and properties of coatings. The final section deals with coated cemented carbide product range in the world's leading producer of tools and tool materials, tools and recommended working conditions for their effective use.
|
|
|
Hard machining with defined geometry edge tools
Bukáček, Zdeněk ; Sedlák, Josef (referee) ; Prokop, Jaroslav (advisor)
This master’s thesis is concerned with subject matter hard machining with defined geometry edge tools. Aim master’s thesis is analysis and parameters evaluation machined surface at hard machining. This master’s thesis contain a characteristic of hard materials, used technology for cutting operation, but also tools and cutting conditions suitable for hard machining. In the conclusion are parameters evaluation machined surface the workpiece.
|
guest ::
