|
| |
|
|
Characterization of poly(1,4-diethynylbenzene) by IGC method
Petrášová, Sabina ; Sedláček, Jan (advisor) ; Pacáková, Věra (referee)
Poly(1,4-diethynylbenzene) ( -conjugated polymer) was prepared as an insoluble polymer network via chain coordination polymerization of 1,4-diethynylbezene catalyzed with [Rh(NBD)acac] complex. Thermodynamic properties and acid-base characteristics of the prepared poly(1,4-diethynylbenzene) were studied by means of Inverse Gas Chromatography (IGC) in the temperature range 80-100 řC. Retention data of selected testing substances were used to determine the Gibbs energy of sorption, the sorption enthalpy and their acid-base and disperse parts as well as the disperse contribution to the surface energy and parameters of KA, KD, ANHPS and DNHPS quantifying the acid-base character of the studied polymer. The results showed that poly(1,4-diethynylbenzene) interacted more efficiently with Lewis bases than with Lewis acids. The values of experimental sorption enthalpy were used for the determination of the parameters KA and KD. Values of these parameters classify poly(1,4-diethynylbenzene) as the material with a slightly acid character. This conclusion is further supported by the results of H. P. Schreiber method based on the application of ANHPS and DNHPS parameters for the evaluation of the acid-base properties of the material. The infrared spectroscopy proved that poly(1,4-diethynylbenzene) contained...
|
|
|
Preparation and properties of thin layers of conjugated polyelectrolytes
Slunečková, Veronika ; Vohlídal, Jiří (advisor) ; Svoboda, Jan (referee)
The study shows strong influence of the conformation of the main chains of polythiophenes in solutions on their spectroscopic properties. The conformational changes affect strength of interactions between neighboring chains and lead to the formation of aggregates of stacked polythiophene chains. Stacked chains show red shift of the optical absorption and lead to visible vibronic structure of absorption bands. Multilayered systems prepared by periodic adsorption of the cationic and anionic polythiophene polyelectrolytes on various substrates show proportionality of the overall layer thickness to the number of coatings, which allows a control of the layer thickness. Adsorption of the conjugated polyelectrolytes on the anatase form of titanium dioxide show better penetration of the anionic polythiophene to porous anatase. The adsorption of polymer into the mesoporous structure is not complete: maximum adsorption of PTTA (poly(thiophene-3-ylacetic acid)) adsorbed on anatase do not correspond to the inner surface of mesoporous anatase. Alternating adsorption from the solutions of polythiophene with anionic and cationic side groups on mesoporous anatase allows preparation of the Graetzel-like photovoltaic cell provided that the adsorption process starts with the anionic polythiophene and the layers are deposited...
|
|
|
synthesis of conjugated polyacetylene based polymers
Duchoslavová, Zuzana ; Zedník, Jiří (advisor) ; Doubský, Jan (referee)
Mostly new acetylene based monomers were prepared. All monomers were prepared by the means of standard spectroscopic methods. All monomers were successfully polymerized using standard metathesis TaCl5 based catalyst. Prepared polymers were characterized by the means of GPC/GPC-MALLS chromatography and standard spectral methods. Fluorescence properties of all prepared compounds were also studied: quantum fluorescence yields were determined and excitation and emission fluorescence spectra were recorded. Polymerization on modern metathesis Grubbs-Hoveyda catalytic systems of all prepared monomers was also tested. These reactions were only partially successful and only low molecular weight oligomers in mediocre yields were obtained.
|
|
| |
|
|
Electric and dielectric properties of organic materials for photovoltaic applications
Florián, Pavel ; Nešpůrek, Stanislav (referee) ; Zmeškal, Oldřich (advisor)
Diploma thesis deals with the use of organic materials in photovoltaic applications and the study of their electric and dielectric properties. The theoretical part of thesis deals issue of the use of organic polymeric materials in photovoltaics and their advantages and disadvantages. Next are the results of various studies of organic solar cells by other authors. In the practical part of the work are shown experimental results (volt-ampere characteristics and impedance spectra) of samples of organic semiconductors and their evaluation.
|
|
|
Deposition and study of optoelectronic properties of thin films for organic photonics
Nagyová, Veronika ; Hubálek, Jaromír (referee) ; Weiter, Martin (advisor)
This diploma thesis concentrates on the properties characterization of new organic materials for solar cells. In the theoretical part, there is a solar cells themed literature search, there is described a mechanism of conversion of solar energy, factors influencing photovoltaic conversion efficiency and materials using for preparation of organic solar cells. The practical part includes the preparation of solar cells and characterization of optical and electrical properties of the studied materials in thin layers and solutions. Used materials were conjugated polymers and derivatives of fullerenes.
|
|
|
Organic solar cells based on polymers
Nagyová, Veronika ; David, Jan (referee) ; Weiter, Martin (advisor)
This bachelor thesis concentrates on the properties characterization of new organic materials for solar cells. In the theoretical part, there is a solar cells themed literature search, there is described a mechanism of conversion of solar energy and the structure of organic solar cells. The practical part includes the preparation of solar cells and characterization of basic optical and electrical properties of the studied materials.
|
|
|
Fotogenerace nosičů náboje v polymerních nanokompozitech
Pfleger, Jiří ; Pavlík, Martin ; Vohlídal, J.
Polymer nanocomposites seem to be promising systems for solar cell application with polythiophene acting as photosensitizer and charge transport medium. The electrophoretic deposition proved to be suitable method for preparation nanostructured core/shell functional layers. The simplicity, fast operation rate and the possibility of covering surfaces of irregular shape, as well as a good quality of prepared films are the major advantages of the method.
|
|
|
Funkční polymery pro aplikace v solárních článcích
Pfleger, Jiří ; Pavlík, Martin ; Hebestreit, N. ; Plieth, W.
Two alternative systems of polymer based solar cell structures were prepared: 1) based on the acceptor modified .pi.-conjugated polymer and 2) composed of a functional polymer - inorganic semiconductor nanocomposite, and their photoelectrical properties were tested. The simple electrodeposition method, providing a large area heterojunction distributed within a bulk of the polymer nanocomposite, was developed.
|
guest ::
