|
|
Multifunctional Building
Kika, Aleš ; Podroužková, Božena (referee) ; Jeneš, Rostislav (advisor)
The project deals the part of the structure of multifunctional building . It is a multi-storey building. In this project are designed slab, basement wall, continous footing, column and footing . Static system and the calculations of the internal forces was conducted in a student version of Scia Engineer 2012.
|
|
|
Overground Parking House
Pevner, Jan ; Klodner, Jan (referee) ; Perla, Jan (advisor)
The work focuses on the design and assessment of selected structural elements of one overground floor monolithic concrete structures and staircases. All calculations are done in accordance with Eurocode 2.
|
|
|
Load bearing RC structure of office building
Ferencz, Balázs ; Zlámal, Martin (referee) ; Šimůnek, Petr (advisor)
The Master’s thesis is focused on the analysis and design of selected members of load-bearing structure of an administration building according to the ultimate limit states (ULS) and seviceability limit states (SLS). The calculation and the analysis was supported by design software SCIA ENGINEER 2012. Structural analysis deals with the design of the reinforced concrete (RC) flat slab above the 4rd strorey which is particularly supported by RC columns and particularly lies on RC walls. Furthermore, the Master’s thesis contains analysis of some selected columns of last three storeys, column of lowest storey, construction of stairway between 4rd and 5th storeys. The work beside this deals with the calculation and design of foundation of the object. The rest parts of the load-bearing structure are not solved in the Master’s thesis.
|
|
|
Load bearing RC structure of the multiple dwelling
Janisch, Filip ; Perla, Jan (referee) ; Šimůnek, Petr (advisor)
The project deals with the lower part of the construction of a residential building. The parking spaces are situated in three underground floors. The five floors occur in the over-ground part of the building. The building is based on the secant walls of Milan around the perimeter. Internal walls and columns are supported with micropiles. In this project are designed base plate, external walls and stairs. Static system and the calculation of the internal forces was carried out in Scia Engineer 2012 Student version.
|
|
|
Multipurpose hall in Holice
Rückerová, Eva ; Hron, Lukáš (referee) ; Šmak, Milan (advisor)
Master´s thesis deals with the design and assessment of the roof construction of the multi-purpose hall in Holice. The other two dimensions of the hall are 28 x 45 m. Height of the hall is 11,28 m. Roofing is done in three variants. The final solution is processed for one presentation. The main supporting element is formed by cross-linking arc beam made of laminated wood. Girders are spaced 5 m and connected purlins. Stability of the construction by three field bracings. The cladding is a rafter, shuttering of OSB particle that carry the roof deck.
|
|
|
Multi-storey building
Hrycík, Martin ; Straka, Bohumil (referee) ; Sýkora, Karel (advisor)
Thesis deals with design of steel structure multi-storey office building. Specifically, it is the eight-storey steel structure of rectangular plan with dimensions of 15.4 x 54.4 m and a height of 29.2 meters. The structure is designed for the site Brno. Static calculation is solved by a combination of manual calculation and calculation using software Scia. It is designed structural arrangement, static action, load analysis, calculation of internal forces, the design of dimensions and connections solutions. Thesis includes drawing documentation. The structure is designed in a variant with a frame joints and in variant with articulated joints. Variant with articulated joints is further processed.
|
|
|
Simulation and statically analysis of cieling structure by Ansys FEM program.
Obršlík, Petr ; Keršner, Zbyněk (referee) ; Křiváková, Jarmila (advisor)
This thesis mainly deals with modeling and static analysis of the ceiling structure in the basic environment of ANSYS. The first part is focused on verifying correctness of the model most stressed parts of the structure with a simple hand-static calculation by the process of stress on a continuous beam. The main part is devoted to modeling composite structure, element types, specifying loads and boundary conditions by ANSYS FEM program. In the end, there are the results of stress and deflection presented, and the structure is evaluated at the ultimate limit state and serviceability limit state.
|
|
|
Design of Load Bearing Concrete Structure
Klodner, Jan ; Vácha, Jaroslav (referee) ; Štěpánek, Petr (advisor)
This thesis is focusing on general issues of floor concrete slabs, technology, implementation, subsoil models, calculation of internal forces and design approaches. Based on these data the thesis monitors the behaviour of floor slabs according to the various parameters. It also includes three versions of design of the real floor slab, made of steel fibre reinforced concrete, reinforced concrete and prestressed concrete. Economic comparison is also included. In addition it developes a design of the chalice base and reinforced concrete column of the supporting hall system, instead of the original usual base with steel column.
|
|
|
Prestressed road bridge in Staré Město
Juříček, Lukáš ; Nečas, Radim (referee) ; Koláček, Jan (advisor)
The thesis proposes the design of main structure concrete bridge,which is transferring highway road across the river Krupá in Staré Město.It is simple span bridge with length of 14,995 m.For the next calculation were chosen post tensioned concrete trapeizodal slab.The slab is assessment on serviceability limit state and ultimate limit state according to valid European standarts.
|
|
|
Slab bridge in Staré Město
Pejčoch, Karel ; Panáček, Josef (referee) ; Koláček, Jan (advisor)
The aim of this bachelor thesis is to design of bridge construction over the river of Krupá located near the city of Staré Město. The load bearing system is composed from one prestressed concrete span. The structural design was made in two variants, which were compared between them. For calculations of first way was used the software of Scia Engineering and second way was calculated by simplified manual method of effective width. All calculations were performed according to actual standard EN.
|
guest ::
