|
|
Prefabricated concrete structure
Šimon, Jan ; Šulák, Pavel (referee) ; Bažant, Zdeněk (advisor)
The master thesis is about a design of supporting structure of prefabricated skeleton hall. The major part of a design are an internal trasverse and longitudinal frames, which contents roof reinforce concrete truss, columns, beam and ceiling joists. All the load acting to the bearing structure is transferred to the prefabricate footing made of reinforce concrete. Other parts of the bulding are not solved in this thesis. The content of the thesis consists of an assembly drawing of parts of the skeleton and the static calculation according to the actual international standards. The output of each static calculation is drawing of a shape of part and its reinforcement.
|
|
|
Design of Monolithic RC Structure
Kuchař, Martin ; Zlámal, Martin (referee) ; Švaříčková, Ivana (advisor)
The bachelor’s thesis describes the design of the load-bearing part of the reinforced monolithic frame concrete structure of the home for the elderly. The subject of assessment are the typical elements of the load-bearing skeleton in the 1st floor: frame rung PS, beam T5, column SR3a and the ceiling plate above the first floor. The assessment is made for ultimate limit states, moreover for frame rung PS the deflection control is provided, too.
|
|
|
Concrete ceiling over stage
Tošenovjan, Marek ; Šimůnek, Petr (referee) ; Perla, Jan (advisor)
This thesis is focused on the design of monolithic ceiling structure above the stage of the theater. The requirements for placement of an theatrical equipment are respected in the calculation of internal forces. Special emphasis is placed on the calculation of support moments in a partial fixation of the ceiling frame in a reinforced concrete wall. The structural design is limited by deflection limits affecting the functionality of theatrical equipment.
|
|
|
The Showroom Structure in Jihlava
Stloukal, Radim ; Sýkora, Karel (referee) ; Šmak, Milan (advisor)
The subject of this thesis is a structural design of a car showroom in municipality Jihlava. For this purpose two different concepts were developed. The main bearing system of the first consists of steel truss girder supported by single profile steel columns. The second idea, a structure with axial ground area 36,0 x 18,5-23,5 m , is made from glue laminated timber. The second mentioned concept was chosen for detailed calculation and documentation. The structure was modelled by 1D member while using Scia Engineer. Results obtained from the computer analysis were taken and main strutctural members were check by manual calculation.
|
|
|
Suspension footbridge
Černý, Jan ; Kulhavý,, Tomáš (referee) ; Nečas, Radim (advisor)
The objective of this master's thesis is a design of suspension footbridge. The footbridge is suspended construction of stress ribbon by one span. The brick deck is supported on the edges and it is kept in a parabolic arc. The suspension cables are kept at two inclined levels. The model lengthways is implemented in the program ANSYS, by non-linear solution. The model crosswise is implemented in the program SCIA ENGINEER 2011. The design is according to relevant current standart.
|
|
|
Multi-storey building
Hrycík, Martin ; Straka, Bohumil (referee) ; Sýkora, Karel (advisor)
Thesis deals with design of steel structure multi-storey office building. Specifically, it is the eight-storey steel structure of rectangular plan with dimensions of 15.4 x 54.4 m and a height of 29.2 meters. The structure is designed for the site Brno. Static calculation is solved by a combination of manual calculation and calculation using software Scia. It is designed structural arrangement, static action, load analysis, calculation of internal forces, the design of dimensions and connections solutions. Thesis includes drawing documentation. The structure is designed in a variant with a frame joints and in variant with articulated joints. Variant with articulated joints is further processed.
|
|
|
Administration Building
Luža, Radim ; Šulák, Pavel (referee) ; Jeneš, Rostislav (advisor)
This bachelor’s thesis deals with the static analysis and assessment of reinforced concrete floor slab above the first ground floor of the administrative building. The ceiling structure consists of a monolithic floor slab, locally supported. The Static analysis was carried out using a programme called Scia Engineer 14. The verification of the calculation was done by the same software, but with two perpendicular frames instead of a modeled plate. Subsequently, we could define the limit state of the dimensioning capacity. The investigation of the ultimate limit state was mainly about bending moments and embossing. Further to It was also carried out assessment of the second limit state, so usability. The second limit state investigations was mainly about limitation of cracks. The drawing documentation was based on the static analysis and advice to single limit states, including a lower and upper reinforcer and extrusion.
|
|
|
Load-bearing structure of mountain hotel
Kudličková, Jitka ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
Master’s thesis is based on analysis and design of a load bearing structure of an mountains hotel. Mountain hotel schould be realized in the village Vernirovice in Šumperk district. The proposed structure is formed 4th floors. In 1.NP is a restaurant, a sports and wellness center. In 2.NP in the right side is situated the swimming pool. In 2 to 4 floor are located rooms. This structure is supported with a strip footing made of reinforced concrete. The main load-bearing elements in the vertical direction are in 1.NP reinforced concrete walls and columns, the upper floors bearing masonry walls of ceramic blocks THERM. The inner support walls are 300 mm thick, outside support walls are 400 mm thick. Floors are constructed of carrying plates with girders above the larger openings. These plates and girders are made of reinforced concrete. In the 2 floor are beams with the span of 8,8 m. These girders are designed of prestressed concrete cause the large loads. Individual levels are connected with monolithic concrete staircases. Around the middle of the building is a monolithic reinforced concrete elevator shaft. The highest elevation above grade level is 16 m. The thesis also deals with relevant drawing documentations for chosen parts of construction.The building is located in the ski area VI and IV wind areas.
|
|
|
Load - bearing structure of apartment block
Nečas, Daniel ; Juchelková, Pavlína (referee) ; Strnad, Jiří (advisor)
Master’s thesis is based on analysis and design of a load bearing structure of an apartment block. This structure is supported with a strip footing made of reinforced concrete. The above-ground part of designed structure consists of brick masonry. Floors are constructed of carrying plates. These plates are made of reinforced concrete and precast boards (prestressed concrete). Individual levels are connected with monolithic concrete staircases. The thesis also deals with relevant drawing documentations for chosen parts of construction.
|
|
|
Concrete ceiling of apartment house
Vyhnalíková, Kateřina ; Strnad, Jiří (referee) ; Perla, Jan (advisor)
The aim of bachelor thesis is to dimension and assess concrete ceiling in a typical storey of apartment house. Software RFEM is used here to calculate internal forces. The thesis also includes manual calculation of internal forces and comparison with results of software and also includes drawings of proposed solution. All calculation are done in accordance with Eurocode 2.
|
guest ::
