|
|
Evaluation of competitive balance in top European football leagues
Vichr, David ; Šíma, Jan (advisor) ; Novotný, Jiří (referee)
Title: Evaluation of competitive balance in top European football leagues Objectives The quality of objective of this bachelor thesis is the analysis of competitive balance of four European football leagues. Namely the Czech league, the Danish league, the Sweden league and the Norwegian league, their comparison and subsequent comparison with other European leagues. Methods: Static competitive balance calculated using the standard deviation of percentage wins. Results: The results show comparison of competitive balance in top European leagues and their development trends. As well as combine examined competitions into groups by similar development trends. Key words: Football, competition, static balance, standard deviation
|
|
|
Competitive Balance the of selected football leagues in Europe, their development and comparison
Mráček, Václav ; Šíma, Jan (advisor) ; Procházka, Jan (referee)
Title: Competitive Balance of the selected football leagues in Europe, their development and comparison. Goals: Determining the competitive balance in the six top European football competitions. This is a Czech Gambrinus liga, Dutch Eredivisie, German Bundesliga, Austrian Bundesliga, Ukrainian Premier liha Hungarian OTP liga, compare to competition and an outline of the development trend. Methods: The standard deviation of percentage wins, correlation coefficient, the presentation of results based on percentages, graphs, trends. Results: All results are presented in the analytical part of the work, verify predetermined hypotheses and are an important source of comparison for each event and outline trends. Keywords: Competition, equilibrium, European football league, football league, static balance, dynamic balance, season, club, reform, UEFA, sport, decreased balance, standard deviation, correlation coefficient.
|
|
|
Suppression of power-line interference in ECG signals
Gregorová, Kateřina ; Vítek, Martin (referee) ; Kozumplík, Jiří (advisor)
This work includes an overview of the different methods of filtering of ECG signals that suppress the network interference. It focuses on the parameters that affect the quality of filtration for the three main groups of filters: FIR, IIR and adaptive filters. The main objective is to evaluate proposed methods in terms of the quality of filtration. This quality is rated an average output SNR, standard deviation and time filtering. The criteria of success is based on the filtration of the basic requirements on digital filters. Design of filter is realized in the Matlab programming environment.
|
|
|
Studie klimatických změn
Kapustová, Zuzana
Bachelor thesis deals with determining the dependence of the maximum wind gust speed on wind's daily track or on its average speed, and disciplines that might be affected. Program Maple was used to find the proper functional relation. Data measured between years 2012 and 2014 by Bohumil Lýsek owner of the meteorological station located in Kunovice where used as a source data for the program Maple
|
|
|
Preprocessing of 1D gel electrophoresis image
Svozilová, Veronika ; Škutková, Helena (referee) ; Vítek, Martin (advisor)
The aim of this work is to propose an algorithm in MATLAB, allowing image processing and evaluation of one-dimensional gel electrophoresis. At first describes the detection of samples based on the horizontal segmentation of electrophoresis gel image, followed by detection of the minimum intensity values of the image, a vertical segmentation and determination of the sample boundaries in the image. The final phase involves testing of the method on publicly available images and evaluation of the results.
|
|
|
Cavitation assessment from flow rate drop and high-frequency pressure pulsations.
Šebek, Miloš ; Hudec, Martin (referee) ; Habán, Vladimír (advisor)
Main issue of this master´s thesis deals with high-frequency pulsations caused by cavitating hydraulic components (in this case nozzle and throttle valve). In first measurement on the nozzle was not a high-frequency sensor set in the way, so the evaluation was incorrect. After re-setting of the way was the nozzle measured again and the pulsations were evaluated correct this time. During the last measurement was the sensor located behind the throttle valve, which was with gradual opening and cavitation treatment measured. Resulting dependencies worked out on time dependence. A special mathematical method, Fourier transformation, was used. It transformed pressure amplitudes into frequency dependence. Evaluation of dependecies is the basic step for frequency band assesment, in which the cavitation on particular components happens.
|
|
|
Redeployment and verification spindles water supply river armours
Jelínek, Norbert ; Musil, Martin (referee) ; Pernikář, Jiří (advisor)
Solving problems of production and calibration spindles water supply river armours by the help of method SPC. Analysis capability of gauge by the help of methodists MSA-Cg,Cgk. Evaluation capability of machanical abnd digital outside micrometer. Verification limiting deviation of micrometrical screw in among - calibration interval. Attestation capability of machine and of the process. Construction of regulation diagram. Project of new control instruments. Technically-economic evaluation:savings 110 560,00Kč, profitability 764,85%, economic return 0,13 year. Successful application of methodists SPC attested by document about adjustability of the process.
|
|
|
Optimalization of the die cast process of high-voltage transformers.
Borunský, Tomáš ; Fiala, Alois (referee) ; Maroš, Bohumil (advisor)
This thesis deals with choises of using mathematical statistics when optimising the compression casting process of high-voltage device transformer. There is a theoretical consideration to be found in the introduction which concerns the compression casting itself and all necessary information connected with it. Then there is a key numerical analysis part following. In the first instance there are variability problems of individual casting device discussed and then a regression analysis made to demonstrate and prove a link between the partial discharge and the key parameters of casting process. Finally an “optimal” casting sequence is suggested and alternative attitude problems with the assistance of Design of Experiments (DOE) are discussed.
|
|
|
Performance comparison of methods for design of experiments for analysis of tasks involving random variables
Martinásková, Magdalena ; Novák, Drahomír (referee) ; Vořechovský, Miroslav (advisor)
The thesis presents methods and criteria for creation and optimization of design of computer experiments. Using the core of a program Freet the optimized designs were created by combination of these methods and criteria. Then, the suitability of the designs for statistical analysis of the tasks vith input random variables was assessed by comparison of the obtained results of six selected functions and the exact (analytically obtained) solutions. Basic theory, definitions of the evaluated functions, description of the setting of optimization and the discussion of the obtained results, including recommendations related to identified weaknesses of certain designs, are presented. The thesis also contains a description of an application that was created to display the results.
|
|
|
The Use of Means of Artificial Intelligence for the Decision Making Support on Stock Market
Vaško, Jan ; Kříž, Jiří (referee) ; Dostál, Petr (advisor)
Diploma thesis deals with analyzing the possibility of using artificial intelligence, specifically artificial neural networks and fuzzy logic, on the capital markets as a tool to support decision making in business. The Matlab software is used for this purpose. The work is divided into three parts. The first part deals with theoretical knowledge, brief description of the current situationin is covered in a second part and the theoretical solutions are applied to the system in the third section.
|
guest ::
