|
Ventilation of Cultural Centre
Hodula, Jakub ; Uher, Pavel (referee) ; Rubinová, Olga (advisor)
This thesis describes the design of ventilation for the cultural center, located in Prague 6 - Dejvice. The center consists of entrance hall, restaurant, conference room, sanitary facilities, restaurant facilities, facilities for performers and from the main hall with a vestibule. I solved the zone in detail the main hall and vestibule zone of sanitary facilities in the first basement floor. The main hall is air-conditioned vestibule with central air-conditioning equipment. Sanitary hot air is ventilated with air-conditioning equipment installed under the ceiling structure. The vestibule is partially air-conditioned central air handling units and fan coils partially located in the lower ceiling. Hall capacity is 173 persons and 68 persons foyer. The cooling source is a block unit. In winter, the hall, lobby and sanitary hot air ventilation. The building is heated with central heating converters in the hall and vestibule with radiator in hygienic facilities. In the theoretical part of the topic I worked in air distribution components, where I discussed the types of distribution of elements, their location and distribution of the type and scope of the current.
|
|
Leisure Time Centre Brno
Machát, Jan ; Fišer, Jiří (referee) ; Odvárka, Antonín (advisor) ; Štěpánek, Ladislav (advisor)
Leisure time center is situated in a part of Brno Nový Liskovec. The land is sloping character, it is bordered by buildings of prefabricated houses. The building is composed of one masses with passage in the middle. Passage replicates the terrain slopes, it has two floors where the first is partially embedded in the ground. The facade is designed as a climbing wall. The bearing structure is reinforced concrete frame in the module 5x6m. The frame is lining concrete monolithic perimeter wall. Infill walls is with blocks of YTONG. As the roofing is flat green roof. Establishment of an object is made of reinforced concrete foundations pass and quiffs.
|
|
Family house with office part
Zeťka, Lukáš ; Jelínek, Petr (referee) ; Rusinová, Marie (advisor)
Subject of this bachelor's thesis is elaboration of the project documentation for currying out of new family house with office part. Building is partial cellarage with ground floor and attic covered with gabled roof as well. Garage is extended to side of building. The vertical structures are made from Porotherm ceramic system. Ceilings are made from concrete prefabricated panels. Structure of the roof constitute wooden truss.
|
|
Centre of Culture Brno
Hanychová, Hana ; Teplý, Vladimír (referee) ; Odvárka, Antonín (advisor) ; Štěpánek, Ladislav (advisor)
Cultural center is situated in a part of Brno Stary Liskovec at Mikulaskovo square. The land is terraced character, it is bordered by buildings of prefabricated houses, at the bottom is hub of public transport. The building is composed of three masses – two cultural halls and in the middle is shopping mall. Shopping mall replicates the terrain slopes, it has three floors where the first and second is partially embedded in the ground. The great hall is located on the second terrace and is connected to 2.NP, a small hall is on the third terrace and is connected to 3.NP. The bearing structure is reinforced concrete frame in the module 5x5m and 5x10m, the frame is lining concrete monolithic perimeter wall in 1.NP, in the others floors with blocks of YTONG. As the roofing is flat roof. Stairs are designed as escalators. Establishment of an object is made of reinforced concrete foundations pass and quiffs.
|
|
Detached house with a dentist’s surgery
Pilný, Ondřej ; Krejsa, Jan (referee) ; Kacálek, Petr (advisor)
The present bachelor’s thesis processed a desing of a newly-built single-family house in the city of Chlum u Hradce Králové. The desing is concerned with a detached building with two floors and partial basement, dentist’s surgery and swimming pool. The house is designed for a family of four members. The structural systém of Kalksandstein sand-lime blocks was chosen for the designed building. The ceiling structure is created with prestressed ceiling panels SPIROLL. The thermal insulation is provided by the ETICS systém and by the ventilated facade with air gap with panelling of fibre cement boards CEMBRIT. The building is roofed with a flat and sloping roof.
|
|
Oscillatory Power Generator Base on Mechanical Resonant Element
Mihalík, Vlastimil ; Houška, Pavel (referee) ; Hadaš, Zdeněk (advisor)
This work deals with the power supply of wireless sensors. When using a wireless sensor is desirable application of alternative energy sources, because the primary cells or batteries may reduce the extent or length of service of the sensor itself. Ambient energy can be used as a suitable alternative source. This energy must be in an appropriate form, which allows its conversion to electric energy. These appropriate, already used types include: solar en., temperature gradient en., en. of flowing liquids, vibration, etc. The advantage of vibrations is its presence in almost all mechanical systems. One of the possibilities for using the vibration of machine systems for power supply wireless sensors is using the vibration power generator with oscillating component. The generator must be designed so that its resonance frequency coincides with the frequency of vibration in the machine system. This method can be used only if the machinery system vibrations at least partially constant. Another option is to use the vibrations caused by, for example, transit transport, or different step acting factor. In this case, it is desirable that the generator is designed with variable resonant frequency, which can partly be achieved, for example, integrating several oscillating component in the body of generator. After the general analysis of the problem, graduation theses will be concerned with the possibility of use of energy from the short damped oscillation and step impulse. Focusing on a proposal of multi-element structures.
|
|
Multifunctional House
Hetych, Martin ; Janík, Zdeněk (referee) ; Kalousek, Miloš (advisor)
This thesis focuses on the design of a multifunctional building in the village Nebovidy. The building will be used for sports, cultural events, entertainment and administrative activities. The building is located in close proximity to the municipal office. The building is divided into two buildings - rear hall with offices and a hall itself. Background has 3 floors and a partial basement. The structural system is a wall with a gable roof with dormers. Hall has a supporting structure made of steel and is partially sunk below ground level.
|
|
Mountain guesthouse
Pischl, Jiří ; Šuhajdová, Eva (referee) ; Šuhajda, Karel (advisor)
The theme of diploma thesis is a new building of the mountain guest house with restaurant. The location of object is quiet part of village Lipová-lázně – Dolní Lipová, district Jeseník. The building has two floors, a partial basement and an attic. Accommodation is designed for 31 hotel guests. In guest house is also private accommodation for employers. The main material of bearing walls are ceramic fittings. The building is based on the passports of plain concrete. The roof is gabled with a dormer window in all of attic rooms.
|
|
Library of Nymburk
Hrbáček, Adam ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
Topic of my diploma thesis is creating design documentation on level of detailed design, Library of Nymburk. Project contains engineering reports, realization drawings, thermal assessment, fire safety assessment, static ceiling evaluation, simplified foundation design and design of staircases. Projected building has three above ground floors and one partial basement. Structural system vertical is made of mansory walls, based in basement on drilled piles and in first upper floor on strip foundations. Staircases are made of cast-in-place reinforce concrete same for ceiling slabs and joist slabs. Roof structure is warm flat roof. Project was designed in computer programs: ArchiCAD 19, IdeaSTATICA7, WDLS 5, Svoboda software and vizualization done in Lumion 3D.
|
|
Possibilities of using and spending time of clients in rest homes
Jindrová, Michaela ; Vodáčková, Daniela (advisor) ; Lejsal, Matěj (referee)
The main aim of this thesis is to describe activation programmes held in rest homes and try to evaluate them on the basis of interviews with clients of chosen institutions. Using the information given by the clients, I would suggest possible changes in current programmes and try to formulate proposals for new programme creations. The partial aim of the thesis is to find out if there are noticeable differences between activation for clients of public, church and private rest homes, and if possible, to describe what these differences lie in. The empirical part of my thesis is a research made by means of interviews with clients of three different rest homes. On one hand I spoke with clients who regularly participate in activation programmes, on the other hand also with clients who do not participate in them or clients who are limited to participate due to their state of health.
|
guest ::
