|
|
Development of diesel engine injection systems
Sikora, Ondřej ; Beran, Martin (referee) ; Píštěk, Václav (advisor)
The bachelor’s thesis has been created as a study on the development of fuel injection systems for diesel engines. The first part deals with the fuel system, which describes the preparation of fuel mixture. There are brief descriptions of individual system components and explains their functions. The main part deals with the injection device, which describes the specific technical solutions used in the past and in the present. Each system is discussed from a construction point of view and its functions. The last chapter describes the contemporary development of injection systems associated with complications and limitations.
|
|
|
Injection System Build-in on Tractor Engine
Svršek, Michal ; Ramík, Pavel (referee) ; Dundálek, Radim (advisor)
The aim of this work is to design the installation of a new injection system to the existing tractor engines and construct new components necessary for proper function of the injection. In the following section is suggesting the location of other accessories for engine control. This is an injection system with a pressure reservoir "Common Rail" and all its components are created in modeling environment PTC Creo 2.0. Designed components are tested for strength and they are subjected to modal analysis.
|
|
|
Common Rail for Four-cylinder CI Engine
Brhel, Štěpán ; Svída, David (referee) ; Dundálek, Radim (advisor)
This master´s thesis deals with instalation of high pressure injection system Common Rail on four-cylinder tractor CI engine. Thesis introduces in the first part the injection systems of CI and tractor engines and related issues. In the next part is solved the conversion of engine, design of most important components - injetor, high pressure pump, pressure accumulator and high-pressure pipes and then stress analysis of new components.
|
|
|
Application of Pressure Accumulator Injection System on Six-cylinder CI Engine
Pacovský, Tomáš ; Štěpánek, Karel (referee) ; Dundálek, Radim (advisor)
This master's thesis deals with application of modern injection system Common Rail on six-cylinder CI engine. One of aims of thesis is to get a large overview of pressure accumulator injection system and explore the development in this area. Among main aims of the thesis belong a new construction layout in Pro/Engineer, accomplishing of static and dynamic analyse of most important parts via the finite element method (FME) and necessary control calculations. Finally, the design documentation of new most essential designed parts will be made. During making the thesis necessary source materials obtained from Vývojový ústav traktorů a.s. of Zetor Group company was made use of.
|
|
|
Application of Pressure Accumulator Injection System on CI Engine
Šiška, Adam ; Štěpánek, Karel (referee) ; Dundálek, Radim (advisor)
This master’s thesis deals with building the most modern injection systém Common-Rail for four-cylinder tractor diesel engine. The following application is a conversion from a obsolete system with inline injection pumps. Because the costs for this conversion must be minimized, that it is effort of minimal intervention in engine design. First this master’s thesis focuses on the theory of injection systems of diesel engines and related things and then the thesis shows the design conversion supported analytical calculations and FEM analysis of newly designed components.
|
|
|
Common Rail System for 6-cylinder Tractor Engine
Černoch, Josef ; Ramík, Pavel (referee) ; Dundálek, Radim (advisor)
This thesis deals with the installation of modern high pressure injection common rail system to six-cylinder tractor engine. This system replaces injection system with in-line fuel injection pump. Common Rail system installation on an existing engine is designed with minimal design changes to the engine block and engine head. It is advantageous to minimize production costs of the transition to high-pressure injection system. The thesis contains the design and stress analysis of the new component for high-pressure injection system.
|
|
|
Common-rail System for 4-cylinder CI-engine
Ošmera, Petr ; Svída, David (referee) ; Dundálek, Radim (advisor)
This diploma thesis with a view to „common rail system for 4-cylinder CI-engine“ deals with the application of modern injection system „common rail“ to already existing compression-ignition tractor engine. The diploma thesis treats of the most necessary adjustments related with the replacement of injection systems which was solved in the way of the minimum adjustments. This kind of solution deals with an economic aspect of the problem. The reconstruction contains the engineering design of development of high pressure components and the suitability of their placing on engine.The primary adjustment of the application of system „common rail“ for existing tractor engine confirmed the possibility of this reconstruction.
|
|
|
Injection Systems of Commercial Vehicles
Horníček, Petr ; Prokop, Aleš (referee) ; Dundálek, Radim (advisor)
In this thesis I describe the fuel system components and their function. Furthermore, there is an overview of the most commonly used injection systems with the principle of operation, advantages and disadvantages of the embodiment. There is also processed the issue of the emission standards. This thesis contains a list of the world's leading manufacturers of commercial vehicles and their injection systems. Finally there is a reflection on the future development of injection systems.
|
|
|
Injection Systems of Commercial Vehicles
Cajzl, Štěpán ; Janoušek, Michal (referee) ; Dundálek, Radim (advisor)
This thesis summarizes information about injection systems used in commercial vehicles. Includes an overview of different types of injection systems, their differences in structure, function description and their pros and cons. The following is a list of the world's leading automobile manufacturers of commercial vehicles, indicating the injection system on the engines. Finally, a comparison of different systems.
|
|
|
Possibilities of Common-rail Injection System
Smilek, Tomáš ; Svída, David (referee) ; Dundálek, Radim (advisor)
Tomáš Smilek Possibilities of Common-rail Injection System BT, Institute of Automotive Engineering, 2008, p. 23, fig. 18, appendices 0 This study´s motivation was to describe common-rail injection system. This work describes history of inovation same as the key parts of this system and function each of them. It also declares advantages in confrontation with old way of injection.
|
guest ::
