|
|
Comparative study of discrete PSD controllers
Pelikán, Leoš ; Dvořáček, Martin (referee) ; Pivoňka, Petr (advisor)
This bachelor thesis deals with verification of heterogeneous structures of discrete PSD controllers on different process structures. Description of controlling system and various structures of PSD regulators is in theoretic part. The practical part of thesis describes progress testing, particular results and compare with adaptive an adaptive controller of B&R company.
|
|
|
Adaptive controllers for systems with time delay and its comparison with classical controllers.
Krykorka, Daniel ; Burlak, Vladimír (referee) ; Pivoňka, Petr (advisor)
Master thesis is focused on the philosophy of design adaptive controller. In the theoretic part are described parts of the adaptive controller, which belongs parts as online identification by recursive least-squares method and PSD controller, which can set its parameters according to identified system (use Z-N method). The part of control system with transport delay is situated at the conclusion of the theoretic part, there are focused on Smith predictor. Practical part is focused on verification of all algorithms, which was performed on models and real systems.
|
|
|
Implementation of RTOS into STM32 microcontrollers with ARM Cortex-M4F core
Gothard, Adolf ; Valach, Soběslav (referee) ; Macho, Tomáš (advisor)
This masters's thesis deals with choice and implementation of two free real-time operating systems into powerful 32-bit microcontroller with ARM Cortex-M4F core. First, there is shortly described the ARM architecture in general, its programmer's model, instruction set and Cortex-M4F core in brief. Next is description of the architecture of used microcontroller STM32F407VGT6 from ST Microelectronics, description of its integrated memories and their organization and functions of its integrated A/D and D/A converters. Next part of this thesis deals with searching real-time operating systems with ARM Cortex-M4F core support and then choose two of these systems for the implementation. The chosen operating systems are more closely described in two following chapters. Next chapter analyses possible implementations of the digital PSD controller and more complex system of such controllers using real-time operating system. Following chapter describes implementation of chosen operating systems and designed controllers. Last chapter deals with evaluation of features and qualities of the chosen real-time operating systems for implementation of embedded control system.
|
|
|
Adaptive controllers for systems with time delay and its comparison with classical controllers.
Faltus, Ivo ; Burlak, Vladimír (referee) ; Pivoňka, Petr (advisor)
Master thesis is focused on the philosophy of design adaptive controller. In the theoretic part are described parts of the adaptive controller, which belongs parts as online identification by recursive least-squares method and PSD controller, which can set its parameters according to identified system (use Z-N method). The part of control system with transport delay is situated at the conclusion of the theoretic part, there are focused on Smith predictor. Practical part is focused on verification of all algorithms, which was performed on models and real systems.
|
|
|
Use of the software PLC in thermal engineering of buildings
Hubený, František ; Kaczmarczyk, Václav (referee) ; Pásek, Jan (advisor)
This presenting master’s thesis deals with a problem of digitaly controled room temperature using the software PLC. The result of this work was creating of an algorithm to control temperature on the requested leve ofl setpoint, minimizing operating costs of the building. The PLC softwares from different manufacturers were analyzed and compared with conventional PLC. The testing facility was disigned and used to control the temperature in the room and data visualization. Room temperature was regulated by PS controller or two point regulator.
|
|
|
Industrial PSD controller
Pelikán, Leoš ; Šír, Michal (referee) ; Bradáč, Zdeněk (advisor)
This master’s thesis deal with principles temperature measurement using resistive temperature sensor PT100 and algorithm design PSD controler. In Work is includ description problems temperature measurement and way evaluation by means of mikrokontroler, which by PWM output controls supplied heat power. Next is here described method realization controls device for heating electric furnace with setup via Ethernet.
|
|
|
Analog system SW simulator
Košta, Ondřej ; Kaczmarczyk, Václav (referee) ; Bradáč, Zdeněk (advisor)
This Master’s Thesis focuses on development and realization of analog system software simulator for simulation of various kinds and orders systems and for function verification of microcontrollers’ control systems. The development and realization of PSD controller is part of this thesis as well. The simulator is written in C++/CLI programming language which combines fast execution of native code and provides an advantage of managed code which has its execution managed by the .NET Framework. The data acquisition is performed via National Instrument’s USB multifunctional DAQ. The PSD regulator is realized by using modern ARM processor architecture.
|
|
|
Prediktive controllers with principles of artificial intelligence
Matys, Libor ; Mikšánek, Vojtěch (referee) ; Pivoňka, Petr (advisor)
Master’s thesis deals with problems of predictive control especially Model (Based) Predictive Control (MBPC or MPC). Identifications methods are compared in the first part. Recursive least mean squares algorithm is compared with identification methods based on neural networks. Next parts deal with predictive control. There is described creation MPC with summing element and adaptive MPC. There is also compared fixed setting PSD controller with MPC. Responses on disturbance and changes of parameters of controlled plant are compared. Comparing is made on simulation models in MATLAB/Simulink and on physical model connected to PLC B&R.
|
|
| |
|
|
Temperature controller of microwave reactor
Pokorný, Ondřej ; Chomát, Luděk (referee) ; Pivoňka, Petr (advisor)
Simple low-cost temperature feedback control loop was created, using personal computer as control and data acquisition element. It controlled the temperature inside mircowave pressure reactor. Medium in reactor tank (volume about 600 ml) was calorified by 1,8 kW magnetron, which power was driven by PSD controller. The PC- process interface was made by USB data acquisition modul UD128A8D. The utility program was written. It implemented PSD controller and data acquisition function. Furhtermore it implemented interface which enabled user to set the technological curve (time-temperature relation). The protocol of experiment was automatically stored to Micosoft Excel file before the program’s termination.
|
guest ::
