|
| |
|
|
Selected designing works on the acid water stripping process
Motyka, Ondřej ; Kilkovský, Bohuslav (referee) ; Jegla, Zdeněk (advisor)
The diploma thesis is focused on selected designing works related to the design of a specific process of acid water stripping. The main purpose of the work is to describe the procedure and the obtained results for these performed design work based on the relevant assignment and the process requirements. In the introductory two chapters, the work focuses on process introduction and description of main process equipment. The following chapters are devoted to the description of the designing works, specifically simulation of the process in CHEMCAD, design calculation of the spiral plate heat exchanger for feed preheating, creation of 3D model and drawing documentation using AutoCAD Plant 3D and lastly strength analysis of the selected pipeline. The main outputs of this work are mainly generated result reports from the process and equipment simulation and strength analysis of the solved pipeline route, 3D model of the process and selected technical and drawing documentation. At the end of the diploma thesis, the performed activities and their outputs are summarized and evaluated.
|
|
|
Design of system wiring of hostel complex, student dormitory and bar
Sladký, Tomáš ; Mastný, Petr (referee) ; Janík, Daniel (advisor)
This diploma thesis focuses on the designing of the systematic wiring in hostel complex, including student dormitory and bar. The work is divided into two parts. The theoretical part involves an overview of current most used intelligent systems. Furthermore, there is a description of the TECO Foxtrot system, which is used to control the complex. The theoretical part summarizes the basic definitions for creating project documentation. Finally, the chapter closes with an outline of a general artificial and escape route emergency lighting design generated using WILS 7.0 software. In the practical part of the diploma thesis, there is a complete project documentation consisting of all requisites needed in the given level of documentation for the construction of a complex of hostel, dormitory and bar using the TECO Foxtrot system. The project documentation contains floor plans of the whole complex, in which the power and data distribution are drawn. It also contains a diagram of wiring of power and system switchboards, topological diagram of power and system distribution, budget and technical report.
|
|
|
Modern approaches to designing electrical equipment with a focus on railway construction
Forejtník, Jan ; Pěcha, Jiří (referee) ; Bátora, Branislav (advisor)
The topic Modern Approaches to Designing Electrical Equipment with a Focus on Railway Construction responds to the decision of the Government of the Czech Republic to introduce the BIM method for government over-the-counter contracts from 1 January 2022. The government evaluated the BIM method as an effective tool for digitizing the construction industry. The diploma thesis deals with the method of designing high-current equipment, technologies and distribution on railways according to this new method. The work summarizes information about the present method of design, used high-current electrical equipment on the railway, the near and distant future of railway operation, the organization of administration and maintenance of equipment. It discusses the principle of the BIM method and basic software solutions supporting design activities according to this new method. The Promis.e software published by Bentley is also described in detail, which supports the design of electrical equipment for linear structures according to this method. The BIM method is a means of fulfilling the essence of Construction 4.0. It uses uniform data formats, a common data environment, working with non-graphic information. In the second part of the diploma thesis, the drawing documentation for the sample project of high-current distribution of the railway station was prepared. It was first created using AutoCAD software. After that, the sample project demonstrates the basic principles of the BIM method using Promis.e software. Furthermore, this project is evaluated, both methods of design are compared. The procedure of introducing the BIM method for the design of electrical equipment in a specific design company is proposed and other possible steps in working with the Promis.e software are discussed. The way of creating a and adding element libraries is described. At the end of the diploma thesis it is stated that to successfully master the design work according to the BIM method, it is necessary to have experience with design work in the field, know the principles of the BIM method, choose a suitable software solution, continuously and thoroughly manage these tools and train staff. Under these conditions, it will be possible to make full use of the potential of the BIM method.
|
|
|
Teaching software for designing an intrusion alarm system
Malík, Ondrej ; Zeman, Václav (referee) ; Burda, Karel (advisor)
In this thesis, we propose a web application for creating basis of documentation for intrusion alarm systems. The application will serve students of the course Security systems for their project work. In the first part of the thesis, we describe general principles of intrusion alarm systems operation that are important for a correct design of a functional and secure alarm system. The proposed application builds on these principles and its functioning is described in the second part of the thesis.
|
|
|
Process pipeline design
Motyka, Ondřej ; Babička Fialová, Dominika (referee) ; Jegla, Zdeněk (advisor)
This bachelor thesis deals with the description of each areas and activities in designing pipeline routes for process equipment, that the designer or constructor has to propose properly and appropriately. First part of this bachelor thesis is focused on the theoretical knowledge and necessary knowledge for the design of a functional route for process equipment. Also, more detailed description of the designing the pipeline can be seen in the first part, such as pipe gripping, thermal expansion, corrosion and pipe insulation. The practical part will deal with the individual steps in creating a project according to the task from engineering organization and creating drawing documentation using the available software. The aim is to describe the procedure for working with this software and the subsequent introduction of this knowledge into the practical design of pipeline routes.
|
|
| |
|
|
Design of electrical installation of polyfunctional house
Sladký, Tomáš ; Pěcha, Jiří (referee) ; Janík, Daniel (advisor)
The bachelor thesis deals with the design of power and data installations in a multifunctional building. This building is composed of two parts - office space located on the first floor and four residential units located on the second floor. The theoretical part of the bachelor thesis deals with the basic definitions and principles for the creation of project documentation, at the end of the theoretical part is presented the proposal of artificial lighting and the design of emergency lighting of escape routes. In the practical part of the bachelor's thesis there is a completely processed project of electrical installation. The project consists of all the requisites necessary for the realization of the building and contains drawings of the floor plans of the two floors of the building, where the power and data wiring are drawn, also contains the diagrams of the connection of all the cabinets and the electricity meter cabinet, the power distribution diagram, the budget and the technical report. The design of the cabinets was verified using the SICHR calculation program.
|
|
|
Vliv stavebně technického řešení nemotorové komunikace na bezpečnost silničního provozu
Šauer, Vojtěch
The thesis discusses the issue of roads designated for non-motorized traffic with respect to their structural and technical solutions and the effect on road safety. The first part focuses on the analysis of unpowered transport infrastructure and legislative innovations in cycling. The practical part analyzes the evolution of accidents among cyclists, compares the theoretical requirements for the creation of infrastructure and practice. More specifically focuses on infrastructure planning and creation of project documentation. Part of it's own tender evaluation and project documentation paths for pedestrians and cyclists, the design of measures aimed at increasing the safety of road users and the quality of the project.
|
|
|
Project documentation of wiring for the revitalization of residential house
Štangl, Jan ; Tesař, Radek (referee) ; Bátora, Branislav (advisor)
This thesis deals with the issue of the revitalization of the outdated electrical wiring in houses with regard to the valid standards. In the introduction to the theoretical part of the thesis the current connection conditions of the E.on distribution network are summarized, then there is a subchapter dedicated to the ways of conductors storing. The following section is devoted to the common spaces as far as lighting and socket circuits are concerned. The thesis continues with a part which contains an analysis of the existing conditions of the building, including the calculation of the risks of unprotected and protected building. The work is then directed on practical technical documentation heavy-current (main lead, lead to the distribution boxes, lightning conductor and grounding) and light-current (common TV antenna, house phone) wiring in the building. The mentioned section contains calculations necessary for determination of the correct wire cross section based on the way of storing, ambient temperature and output power. In the same section there are processed also lighting designs in all the common areas (for example, the intensity of the illumination determined by the ČSN standards emitted by the Czech Office for Standards, Metrology and Testing). In chapter no. 4.9 the lightning conductor including the earthing of the building is drawn up.
|
guest ::
