|
|
Design of manufacturing technology for plastic base timer
Březina, Vít ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This master´s thesis addresses the design of technology manufacturing plastic parts. The first part deals with the study of theoretical properties of plastics and processing applicable to a given problem. In the second part is designed double injection mold with hot runners. The following authentication function by analyzing the injection solution and the work concludes technical and economic assessment of the project.
|
|
|
Manufacturing process optimalization of high-volume plastic molded parts production
Grycz, Radek ; Dvořák, Milan (referee) ; Štroner, Marek (advisor)
This thesis deals with optimization of manufacturing process of plastic molded parts production. The first part focuses of describing current workplace, thanks to that was found out amount of transported materials. In second part there are two possibilities of solving problem with target to decrease amount of manipulations and transports. On base of this evaluation this these variants, the optimal variant is choosen. This variation improve molding process, decrease number of manipulation equipments and number of operators.
|
|
|
Optimum layout of pressing line for the production of reflectors at Automotive Lighting
Šťastný, Michal ; Hrbáček, Jan (referee) ; Kubík, Roman (advisor)
This thesis deals with optimization of a press line part for the manufacture of reflectors present at the Automotive Lighting Company, Jihlava. The first part focuses on describing the current workplace layout of the press line. The workplaces are located inconveniently and thus require a larger number of operators and a considerable amount of manual work. The second part of the thesis proposes layout solutions for the injection presses and for other machine parts. At the same time, a smoother transition design is proposed for the press line and for the manufacturing section that follows. Based on an evaluation of selected criteria, the optimum version is chosen, thereby adding to the efficiency of the molding process by reducing the number of operators required, by lowering the proportion of manual work relative to other activities, and by limiting the risk of poor quality. The conclusion of the thesis sums up the necessary investment costs and offers an economic assessment of introducing the selected press line arrangement to operation.
|
|
|
Design of manufacturing technology for plastic lever
Stránský, Luboš ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This thesis describes the design of injection form for production of plastic lever. In the introduction,there is general literary studies of plastics and injection molding technology. Then continues studies of the injection molding machine, injection form or by selecting the gating systém. The practical part is injection mold design which includes a calculation of the injectionparameters, selection of equipment and technical and economic evaluation.
|
|
|
Production technology of plastic threaded adapters
Turek, Tomáš ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
The Master thesis deals with the possible production of the plastic unit with thread. As the most suitable material was chosen the polyformaldehyde (POM), its production label is Delrin 500P NC010 by Du Pont. The thesis consists of a part with the information about the technology of injection molding of plastics and a part where processing parameters for the production of the plastic unit are designed. Part of the solution was to create an assembly design of injection mold. Since the plastic unit with thread is very specificly shaped the form is handled as a slide mold. The mold is pieced together from normalized parts by the Hasco and DME company. The serie of 100 000 pieces would be delivered in 5 months. Because of the cost savings a solution of the cold-runner system was suggested. A suitable injection molding machine was chosen from the calculated values from Arburgfroms – Type 370s Allrounder 500-170.At the end of the thesis costs were evalueted for acquire per one piece of adapter.
|
|
|
Manipulator automati conveyor container for injection molding machine
Rychtářík, Jan ; Pavlík, Jan (referee) ; Bradáč, František (advisor)
The thesis is focused on proposal of automatic transport feeder that can be used for injection moulding machines. It is concerned with conveyor belt, gravitational roller line and lift. Proposal of construction of automatic transport feeder, calculation of drive for conveyor belt and driven line is contained in this thesis. There is calculation of driveshaft, proposal of spring and calculation of bearing lifetime. Angle of conveyor of gravimetric roller line and speed at the end are calculated. Calculation of proposal of drive for lift and proposal of drive roller line on the lift is here. This thesis contains senzor, operation and steering, safety protection of feeder. There are applicability of robotic workplace and economic calculation at the end of thesis.
|
|
|
Production technology of plastic unit base
Vyškovský, Stanislav ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
Thermoplastic injection technology is widely used in all sectors of consumer electronics and automotive industry. The biggest advantage of this manufacturing technology is a high degree of automatization and good reproducibility of the manufacturing process. Another advantage is the possibility of recycling of the gating scrap and defective products. The main task of this work is to calculate the necessary parameters for the injection process, which takes place at the designed injection form. Next part is technical design which includes choice of standard parts of injection mold and idividual semi-finished parts for mold. Thesis continues with selecting the type of injection press based on calculated parameters of the injection process. Thesis is finished by technical-economic evaluation.
|
|
|
Design of manufacturing technology for car carpet
Kavan, David ; Žák, Ladislav (referee) ; Kandus, Bohumil (advisor)
The main goal of this bachelor thesis is design of a manufacturing technology for car carpet made from a thermoplastic elastomer. Car carpet will be produced by injection molding with a hot runner system in a series of 42 000 units per year. At first there is an analysis of the current technologies, enclosed with a summary of reasons for the changes in manufacturing technology. Then following is a general review of the literature relating to plastic materials and injection molding technology. In the practical part a suitable material is chosen, injection molding machine is chosen according to calculated technological parameters and a conceptual design of an injection mold for car carpet is executed. The last part is a technical and economical evaluation comparing the current production technology with the newly proposed technology.
|
|
|
Production technology of the plastic top cover
Majerčíková, Erika ; Žák, Ladislav (referee) ; Kandus, Bohumil (advisor)
This thesis deals with the production technology of the plastic top cover by injection molding. Series production is set at 500 000 units, for which the required period of delivery is 9 months. A literary study is developed, focusing on the technology of injection molding in molds in the first part of the thesis. The second part is practical, which includes a design technology for the manufacturing of the plastic top cover, namely: the choice of material, determination of process parameters, the choice of the injection molding machine, and the injection mold design. The chosen material is a polyamide 6 with 30 % share of the glass. According to technological parameters of injection, the injection molding machine, Engel ES 200/65, was chosen. The injection mold is composed of standards parts of the company Meusburger and HASCO.
|
|
|
Technology of injection of thermoplastics
BASTL, Jiří
This thesis describes technology of injection of thermoplastics and disserts upon important factors of mass production of plastic components. The document also illustrates modeling in 3D software application and step by step explains production of a part of an injection molding machine.
|
guest ::
