|
|
Family house Bratčice
Pulgretová, Kateřina ; Pobořil, Lukáš (referee) ; Petříček, Tomáš (advisor)
The aim of the project is a new building of a family house in the cadastral area Bratčice, South Moravian Region. The house is in the row of existing development. It is designed for a family of four. The building has no basement and two floors. On the first floor there is an entrance, garage and main day area. On the second floor there is a bedrooms, work room and utility room. The building is designed mainly in wall system of Porotherm. There is a shed roof with a dormer and flat roof. The facade is designed as an external thermal insulation composite system or as a ventilated facade.
|
|
|
Family House
Dolínková, Ivana ; Ing.Martina Miškufova (referee) ; Hubáčková, Blažena (advisor)
Project documentation addresses the single-family house. It is a semi – detached house. The building has two floors. House is a no basement with shed roof. The structural systém consists of a vertical brick wall of ceramic bricks and reinforced concrete columns. Ceilings, beams and ceramic inserts. The roof is a single casting. The construction is based on strip footing.
|
|
|
Energy efficient house with design office
Lampa, Martin ; Tomíček, Oldřich (referee) ; Ostrý, Milan (advisor)
The Bachelor´s thesis Energy efficient house with desing office is made as building documentation in agreenment whith standarts and legal norms and acts. House is desinged as two floored basement house with pitched roof and one floored cellarless, flat roofe part with workshop and garage. The construction is based on a concrete strip foundation. The building is made of ceramic block, the ceiling and flat roof is designed as monolithic construcion, pitched roof is made as wooden roof construction. House is projected as Low energy detached house.
|
|
|
The family house with residential attic
Chalupská, Eva ; Krejčová, Lenka (referee) ; Krupicová, Jana (advisor)
The aim of my thesis was a proposal of new built family house. The house will be located in the land in Třebenice on plot No. 303/1. There is no cellar in the house, but there are two main storey, the second storey is a habitable attic. It has a gable roof. The Ytong system was used for the construction proposal of the house.
|
|
|
Family house
Skalický, Roman ; Brezovský, Jindřich (referee) ; Hlavačka, Tomáš (advisor)
Two-storey family house without basement, with double garage and green roof. Walling system KMB SENDWIX L is used for walls. System KMB MIAKO is used for ceiling construction. Fasades with wooden facing or brick veneer wall are ventilated.
|
|
|
Family house, Těšetice
Krahulcová, Šárka ; Matějka, Libor (referee) ; Müller, Jan (advisor)
The Bachelor´s thesis solves a design of the family house. The family house will be in village called Těšetice, in the cadastral municipality "Těšetice u Olomouce". The house id independently standing, it is designed as house for a family of four. The building has two floors and the building has no basement. The main construction system are walls constructed from Ytong porous concrete blocks, insulated by mineral insulation from stone-made fibers. The building is partly covered by shed roof with gradiet 5°and partly is covered by flat roof.
|
|
|
Family House
Pončíková, Pavla ; Ing.Martina Miškufova (referee) ; Hubáčková, Blažena (advisor)
Project documentation one generation family house with garage. This family house is single state. The building has two floors. House is a no basement with shed roof. The structural systém consists of a vertical brick wall of ceramic bricks and reinforced concrete columns. Ceilings, beams and ceramic inserts. The roof is a two casting. The construction is based on strip footing.
|
|
|
Semi-attached house, Helenin
Polák, Tomáš ; Kalábová, Tereza (referee) ; Bečkovský, David (advisor)
Subject of submission bachelor thesis was designed semi-attached house, which part of this building is lonely space for family housing. Semi-attached house was placed in Helenín. Object with two above-ground floor and has nothnig basement. Entrance and access road is placed from north side of the plot. Load bearing structure is designed from Velox system. Object has saddle and aisle roof. House provides ample space for a five-member family. Semi-attached house was designed in step with rule in operations and legal regulations.
|
|
|
Semi-attached house, Havlickuv Brod
Váňa, Václav ; Kalábová, Tereza (referee) ; Bečkovský, David (advisor)
Bachelor thesis project solves a family semi-attached house in flat terrain. Terraced house is located on the ground number 1646/302 in the city Havlíčkův Brod, district Horní Žižkov. Built-up area of the house is 104,73m2. The building has two above-ground floors, no basement. The house is designed for four to five people, the rooms are oriented mainly towards the south, part of the house is a garage. Outer and interior bearing walls are designed from the shuttering of the company Velox, interior partitions are made of plasterboard. Ceilings are created from ceiling beams and formwork liners Velox. Terraced house has a saddle roof, roof slope is 15°. Exterior doors and windows are plastic from the company Vekra. Also includes is a seminar paper on the topic of heat pumps in family houses.
|
|
|
New building for habitation with tooth surgery in Červený Kostelec
Junková, Pavlína ; Horálek, Jiří (referee) ; Benešová, Romana (advisor)
In the bachelor´s thesis there is designed new building for habitation with tooth surgery. House is located in the town of Cerveny Kostelec, street Lánská on plot No 1007/14. The building has two floors, has not a basement and has flat roof. The building is designed by Heluz system, whole house is insulated with external thermal insulation composite system. In the first floor there is tooth surgery and living area. In the second floor there is only living area. The right side is connected to the building garage. The project itself is processed in ArchiCAD 14.
|
guest ::
