National Repository of Grey Literature 31,887 records found  beginprevious21 - 30nextend  jump to record: Search took 2.78 seconds. 

Packet Classification Algorithms
Puš, Viktor ; Lhotka,, Ladislav (referee) ; Dvořák, Václav (advisor)
Tato práce se zabývá klasifikací paketů v počítačových sítích. Klasifikace paketů je klíčovou úlohou mnoha síťových zařízení, především paketových filtrů - firewallů. Práce se tedy týká oblasti počítačové bezpečnosti. Práce je zaměřena na vysokorychlostní sítě s přenosovou rychlostí 100 Gb/s a více. V těchto případech nelze použít pro klasifikaci obecné procesory, které svým výkonem zdaleka nevyhovují požadavkům na rychlost. Proto se využívají specializované technické prostředky, především obvody ASIC a FPGA. Neméně důležitý je také samotný algoritmus klasifikace. Existuje mnoho algoritmů klasifikace paketů předpokládajících hardwarovou implementaci, přesto však tyto přístupy nejsou připraveny pro velmi rychlé sítě. Dizertační práce se proto zabývá návrhem nových algoritmů klasifikace paketů se zaměřením na vysokorychlostní implementaci ve specializovaném hardware. Je navržen algoritmus, který dělí problém klasifikace na jednodušší podproblémy. Prvním krokem je operace vyhledání nejdelšího shodného prefixu, používaná také při směrování paketů v IP sítích. Tato práce předpokládá využití některého existujícího přístupu, neboť již byly prezentovány algoritmy s dostatečnou rychlostí. Následujícím krokem je mapování nalezených prefixů na číslo pravidla. V této části práce přináší vylepšení využitím na míru vytvořené hashovací funkce. Díky použití hashovací funkce lze mapování provést v konstantním čase a využít při tom pouze jednu paměť s úzkým datovým rozhraním. Rychlost tohoto algoritmu lze určit analyticky a nezávisí na počtu pravidel ani na charakteru síťového provozu. S využitím dostupných součástek lze dosáhnout propustnosti 266 milionů paketů za sekundu. Následující tři algoritmy uvedené v této práci snižují paměťové nároky prvního algoritmu, aniž by ovlivňovaly rychlost. Druhý algoritmus snižuje velikost paměti o 11 % až 96 % v závislosti na sadě pravidel. Nevýhodu nízké stability odstraňuje třetí algoritmus, který v porovnání s prvním zmenšuje paměťové nároky o 31 % až 84 %. Čtvrtý algoritmus kombinuje třetí algoritmus se starším přístupem a díky využití několika technik zmenšuje paměťové nároky o 73 % až 99 %.

The Physiotherapy after Fractures of Bones of the Upper Limbs
Fantová, Ludmila ; Majerová, Markéta (referee) ; Micková, Marie (advisor)
This work is focused on the possibilities of physiotherapy in upper limb bone fractures. Fractures are very common especially by older aged patients with osteoporosis. Most fractures are caused by falling on extended upper limb. Fractures treatment can be conservative or operative. Healing time of the bone and the success of physiotherapy depend on the type of wound, method of treatment, personality and cooperation of the patient. Regime precautions are also very important. I was able to verify the efficiency of theoretical knowledge on two patients, by chosen method I reached different level of improvement.

Image analysis in tribodiagnostics
Machalík, Stanislav ; Stodola,, Jiří (referee) ; Tillová,, Eva (referee) ; Zemčík, Pavel (advisor)
Image analysis of wear particles is a suitable support tool for detail analysis of engine, gear, hydraulic and industrial oils. It allows to obtain information not only of basic parameters of abrasion particles but also data that would be very difficult to obtain using classical ways of evaluation. Based on the analysis of morphological or image characteristics of particles, the progress of wearing the machine parts out can be followed and, as a result, possible breakdown of the engine can be prevented or the optimum period for changing the oil can be determined. The aim of this paper is to explore the possibilities of using the image analysis combined with the method of analytical ferrography and suggest a tool for automated particle classification. Current methods of wear particle analysis are derived from the evaluation that does not offer an exact idea of processes that take place between the friction surfaces in the engine system. The work is based upon the method of analytical ferrography which allows to evaluate the state of the machine. The benefit of use of classifiers defined in this wirk is the possibility of automated evaluation of analytical ferrography outputs; the use of them eliminates the crucial disadvantage of ferrographical analysis which is its dependence on the subjective evaluation done by the expert who performs the analysis. Classifiers are defined as a result of using the methods of machine learning. Based on an extensive database of particles that was created in the first part of the work, the classifiers were trained as a result, they make the evaluation of ferrographically separated abrasion particles from oils taken from lubricated systems possible. In the next stage, experiments were carried out and optimum classifier settings were determined based on the results of the experiments.

Optimization of network flow monitoring
Žádník, Martin ; Lhotka,, Ladislav (referee) ; Matoušek, Radomil (referee) ; Sekanina, Lukáš (advisor)
The thesis deals with optimization of network flow monitoring. Flow-based network traffic processing, that is, processing packets based on some state information associated to the flows which the packets belong to, is a key enabler for a variety of network services and applications. The number of simultaneous flows increases with the growing number of new services and applications. It has become a challenge to keep a state per each flow in a network device processing high speed traffic. A flow table, a structure with flow states, must be stored in a memory hierarchy. The memory closest to the processing is known as a flow cache. Flow cache management plays an important role in terms of its effective utilization, which affects the performance of the whole system. This thesis focuses on an automated design of cache replacement policy optimized to a deployment on particular networks. A genetic algorithm is proposed to automate this process. The genetic algorithm generates and evaluates evolved replacement policies by a simulation on obtained traffic traces. The proposed algorithm is evaluated by designing replacement policies for two variations of the cache management problem. The first variation is an evolution of the replacement policy with an overall low number of state evictions from the flow cache. The second variation represents an evolution of the replacement policy with a low number of evictions belonging to large flows only. Optimized replacement policies for both variations are found while experimenting with various encoding of the replacement policy and genetic operators. The newly evolved replacement policies achieve better results than other tested policies. The evolved replacement policy lowers the overall amount of evictions by ten percent in comparison with the best compared policy. The evolved replacement policy focusing on large flows lowers the amount of their evictions two times. Moreover, no eviction occurs for most of the large flows (over 90%). The evolved replacement policy offers better resilience against flooding the flow cache with large amount of short flows which are typical side effects of scanning or distributed denial of service activities. An extension of the replacement policy is also proposed. The extension complements the replacement policy with an additional information extracted from packet headers. The results show further decrease in the number of evictions when the extension is used.

Effective using of potential of bilingual environment
HOVORKOVÁ, Eva
The dissertation thesis "How to use the potential of bilingual environment efficiently" endeavors to highlight bad as well as good practices in bilingual upbringing. Bilingualism represents at present a very topical issue. In connection with increasing globalization, the issue of learning of foreign languages is more and more emphasised. People living in mixed marriages have often no idea how to bring their children up. In many cases they take steps that lead to irreversible consequences. The theoretical part of the thesis gives a survey of bilingualism, the division and kinds of bilingualism and ways of its acquisiton. The theory is practically illustrated in the empirical part through various examples. 42 case studies have been carried out, which include characteristic and uncharacteristic respondents. The findings of the research are compared with the facts mentioned in the reference works. The aim of the dissertation thesis is to find out which educational methods should parents follow in bilingual education and which methods they should better avoid.

Social transformations of the Czechoslovak village in the first half of the fifties - example of the district of Sedlcany
Čermáková, Hana ; Rákosník, Jakub (advisor) ; Pullmann, Michal (referee)
This thesis seeks to capture the changed political climate after 1948 in the Czechoslovak village. It examines one political Sedlčany district, which was very specific in term of industrial backwardness and depopulation after World War II. It consisted of a specific marginal share of industrial production and low population density. The starting point is the work of Communist propaganda at the district level. The second chapter deals with the theoretical definition, especially socio-cultural propaganda as a concept, is looking for its solution, goals and different definitions. Another chapter deals with general history Sedlčany and regional specifics. The fourth and fifth chapter focuses on the local structure of the district committee and the lower components of the Communist Party of Czechoslovakia in the region and social transformation of society as a whole in the first half of the fifties in the country. The second part of the thesis is devoted to defining the scope of direct advertising strategies and resources. Most of the work deals with propaganda, describing the district level, monitors the work of the district committee of the Communist Party of Czechoslovakia, analyzes the rural district newspaper articles and records the memories of witnesses. The remaining chapters deal with the practical...

Faktory ovlivňující poptávku po osobních automobilech v ČR
ČURILLOVÁ, Michaela
The bachelor thesis investigates factors which influence the demand for passenger cars in the Czech Republic. The theoretical part of this work is focused on basic terms and determinants which are important for the demand. Further it describes particular statistical methods, which are used for the analysis. The practical part contains the introduction to the automotive industry and the description of specific attributes of the demand for passenger cars. This part analyses factors which may have an effect on the demand for passenger cars in the Czech Republic. The main factors and the dependence are explained by applying econometric methods. Analyzing reveals these important factors: number of registrations of passenger cars, consumer prices of new and used passenger cars, consumer prices of fuel, population and income.The conclusion contains the summary of impacts on the specific demand.

Application of Queueing Theory
VÁŇOVÁ, Eliška
The goal of this thesis was to understand Queueing Theory and use it for analysis of queueing system of hypermarket company PZV. Theoretical part is consists of basic iformations which is necessary to know for application of queueing theory. First chapter is about random variables, random event, random proces, stochastic and Poisson processes and Markov chains. Then was possible to describe queueing theory basic characteristics, parameters, analy-sis, classification and basic models. In the practical part was from the beginning analyze development of custo-mers going through cashier zone. On the base of analysis were customers divided into 4 groups. For these groups were counted characteristics and parameters, next was analyzed the system, but because data were too inaccurate, it was necessary to use different values for the groups and to count analysis for these values. The last step was to find number of cashiers to make system optimal. The result, it was 4 ca-shiers, was unfortunately not accurate. For better results it would be necessary to have more detail data.

Project management in selected company
POKORNÝ, Radek
This work deals with project management in chosen company. It has two parts. The first part is theoretical, which is focused to theoretical treatment of the subject. It explains what is the project, management of projects, organizations of projects, processes of project management, what is target of project, communication, control, changes and risks and more. In the practical part I focused to concrete company and project management and than I analyzed concrete project. Name of the mentioned company is OHL ŽS, a.s. It is company from Spain, which acts all over the world. In the Czech Republic has the base in Brno. This company has several divisions and every of them is focused to different professional architecture. I have chosen division of structural engineering. This division builds all kinds of buildings. It could be construction of new buildings or reconstruction. To analysis of chosen project I used various business documents, contracts with investor or suppliers, document which include billing, timetable. I especially used my experience with projects of this company, and I was part of this project. Name of this project is Reconstruction of cladding including replacement windows and insulation. During the analysis of project I found a couple major gaps. If we could avoid these gaps, we could increase profit. These graphs is especially in management. At the beginning there were appointed two temporary construction managers. They doesn't care about result project, because they knew that they will not be to the end of the project. These gaps are because there is missing motivation system. Project manager can´t affect results of employees. It doesn´t depend on performance of employees, they always has the same wages. For elimination of these gaps I proposed several suggestions for improvement. The first suggestion is modification and extension of motivation system. New motivation system include personal evaluation. This evaluation depends on performance of employee. The second part is bonus from over profit. The next suggestion is make a new working position. This position would take care about controlling and project documentation. During the building project, especially at the end is construction manager very busy. It depend of decision of construction 63 manager what kind of activity will have prefer. Project documentation and administration or controlling of building works. If they are doing everything correct and technology are respect. Suggested position would take care about invoices, real work, which is done, project documentation, controlling of budget. The third suggestion is purchase of small machinery such as chipping hammers and drills. At this time they rent all devices. Rent is higher than purchase price. The last suggestion is use credit to restoration of fleet. At this time they have obsolete fleet, because the bought all cars by cash. It is not conveniently.

Distribution management in a large company (warehouse)
MICHALOVÁ, Jana
Distribution management in a large company. This Master´s Thesis examines the company Fruko-Schulz, s. r. o. This company has been making spirits. The goal is to map out the information and material flows toward the warehouse and from the warehouse. Subsequently, to analyze the current state of the company. Based on the information propose measures for improvement. In own work is described in detail and enterprise activities in a company. After ideas are designed to change. These proposals relate to distribution to the end customer through the gastronomical exhibitions and fairs. Other proposals are aimed at end users in the Russian market. Ideas for packaging or new products are designed, but is backed that do not make sense. Company Fruko-Schulz, s. r. o. sas a long tradition and reputation. But that's not enough, the competition is great and it isalso at a high level. The idea to focus on the Russian market is very good and there is great potential.