National Repository of Grey Literature 15,832 records found  beginprevious21 - 30nextend  jump to record: Search took 0.58 seconds. 

Surface modification of glass fibers for polymer composites
Knob, Antonín ; Marek,, Aleš (referee) ; Burša, Jiří (referee) ; Čech, Vladimír (advisor)
The doctoral thesis is aimed at preparation of glass fiber reinforced polymer composites with controlled interphase formed by plasma-polymerized tetravinylsilane and tetravinylsilane/oxygen thin films. The thin polymer films of specific physico-chemical properties and thickness were deposited to improve interfacial adhesion of glass fiber/polyester composites. The fiber surface modification was performed by using plasma enhanced chemical vapor deposition in low-temperature RF plasma operating in an various effective power range and different treatment time. Test results were examined in relation to the interlayer thickness and different treatment conditions. The prepared interlayers were analyzed to evaluate physico-chemical composition and properties (XPS, RBS, ERDA, FTIR and spectroscopic elipsometry). Selected mechanical properties were evaluated by AFM. Mechanical response of plasma interlayers was evaluated by short beam shear test and direct method of testing the interfacial shear strength using microindentation. The interphase shear failure was controlled by the shear strength at the interlayer/fiber interface as follows from experimental and model data.

Identification of damaged zones in C/PPS specimens subjected to fatigue loading based on high-resolution thermography
Koudelka_ml., P. ; Kytýř, Daniel ; Fenclová, Nela ; Šperl, Martin
In this study high resolution thermography is used for identification of damaged zones in Carbon fiber/polyphenylene sulfide (C/PPS) long fiber composite specimens with induced impact damage subjected to tensile fatigue loading. Image processing techniques were applied on thermographs from all loading cases to obtain segmented images of the damaged location that were then used for\ncalculation of the heated area. Results show that the considered method can be used to identify heated area in the vicinity of damage with high confidence at low number of cycles where no significant fatigue effect is present in the material.

Mechanochemical Preparation of Alumina-Ceria
Jirátová, Květa ; Spojakina, A. ; Tyuliev, G. ; Balabánová, Jana ; Kaluža, Luděk ; Palcheva, R.
Ceria containing catalysts play an essential role in heterogeneous catalytic processes. However, ceria shows poor thermal stability and low specific surface area and therefore, many studies have been done to improve its properties by combination with other oxides. Alumina-ceria is substantial component of the three ways catalysts, due to the ceria ability to function as the buffer of oxygen and to enhance the oxygen storage capacity of the catalysts. Ceria in these catalysts also functions as structural promoting component, increasing alumina stability towards thermal sintering. Promising method of oxides preparation, very interesting and simple but not sufficiently studied yet is a mechanochemical synthesis. Here we report on the synthesis of nano-sized alumina, ceria and ceria-alumina of various compositions by a wet solid phase mechanochemical reaction of hydrous aluminum, and/or cerium nitrate with ammonium bicarbonate after addition of a small amount of water. The aim of this contribution is to study processes being in progress during synthesis of the mixed oxides, interaction between components and their mutual effect on the properties of resulting products. The phase evolution during mechanical milling and the subsequent heat treatment of precursors were studied by X-ray diffraction, DTA/TG, H2-TPR, NH3-TPD, CO2-TPD, N2 adsorption at -195°C, IR, and XPS spectroscopy. Alumina and mixtures of alumina with different quantities of CeO2 (1- 18 wt. %) were synthesized by mechanochemical method from aluminum nitrate, cerium nitrate and ammonia bicarbonate.
Fulltext: content.csg - Download fulltextPDF
Plný tet: SKMBT_C22015083108560 - Download fulltextPDF

Doped DLC coatings for biomedical applications
Písařík, Petr
Nowadays there are materials having excellent properties for use in medicine (Diamond-like carbon, Hydroxyapatite, …). Diamond-like carbon (DLC) is a metastable form of amorphous carbon containing bonded carbon atoms of sp2 and sp3 hybridized orbital. DLC layers are semiconductors with high mechanical hardness, chemical inertness, low coefficient of friction, high thermal conductivity, good electrical and optical properties, biocompatibility and no cytotoxicity. All properties of the films are not always ideal, so it is necessary to modify the layer. One example of how to modify the properties of thin layers are dopations. The incorporation of dopants in films may lead to greater multifunctionality and much improved properties. Most modifications were made to modify contact angle and surface energy, to reduce internal stresses, to decrease surface roughness, coefficient of friction or wear....

Expression of selected proteins in sperm in men with normal and pathological spermiograms using monoclonal antibodies
Pěknicová, Jana ; Čapková, Jana ; Dorosh, Andriy ; Margaryan, Hasmik ; Kubátová, Alena ; Děd, Lukáš
Recent studies show that infertility in human populations it affects an estimated 15% of couples of reproductive age. Male infertility is the primary cause for 60% of these cases. For these reasons, we analyzed the acrosomal and sperm surface proteins in men with normal and pathological spermiograms. We found that intra-acrosome proteins: TERA (Transitional endoplasmic reticulum ATPase), GAPDHS (Sperm Glyceraldehyde-3-phosphate dehydrogenase), and PRKAR2A (C-AMP-dependent protein kinase II, PRKAR2A), which can be identified using our monoclonal antibodies, are different express in healthy men and men with astenozoospermia (with reduced sperm motility), and with a significantly reduced expression in the astenozoospermia. These proteins are involved in energy metabolism and apoptosis of the cells, and some of them in the sperm-egg interaction; therefore, they have an important role in reproduction. On the other hand, there were no statistically significant differences in the expression of surface proteins (Appolipoprotein J (Clusterin) and Semenogelin). Our findings show that astenozoospermia as a complex disorder of the semen is often combined with other pathological conditions that are not diagnosed by the semen analysis. Therefore monoclonal antibodies are so suitable instrument for the detection of proteins associated with the pathology of the sperm in the semen with low sperm motility. In general, monoclonal antibodies against the sperm proteins are an appropriate tool to detect sperm quality in reproductive medicine.

Role and competences of the nurse in compared with Czech Republic and Namibia
KLYNCYPAROVÁ, Hana
Theoretical grounds The nursing profession among the professions and mission. Job nurse is one of very important professions. Nurse is an independent worker who has an irreplaceable role in the provision of care. In practice, certain roles, such as the role of a caregiver, the educationalist, communicator, the role of the lawyer, consultant, person, who brings the change, manager and researcher. These roles are constantly interacting and are interconnected. Health care has multidisciplinary and multiprofessional character. Although each of these professions contribute to care in a unique way, all share certain skills that are necessary to ensure the quality of care. Over the years there have been increasing professional skills and increase competencies. Expanded the range of services for which they previously did not have the competence or sisters had a written authorization of a doctor. This work is made up of theoretical and empirical part. The theoretical part provides an overview and information on the field of nursing and its history, dealing with the care system and education system in the Czech Republic and Namibia. The following list of findings roles and their importance in the nursing profession. The last part deals with the competencies of nurses in both countries. The aim of the thesis: The aim of the study was to determine the roles and responsibilities of nurses in the Czech Republic and Namibia. To to obtain this information were chosen research question what role nurses advocate in the Czech Republic and Namibia, and what are nurses in the Czech Republic and Namibia competence. Methods: To ensure the necessary data and information was chosen qualitative research through deep interviews. Nurses who were interviewed were from a hospital in the Czech Republic and nurses from hospitals in Namibia Keetmanshoop. All interviews were recorded on a Dictaphone andwritten down on the paper. Results: Recorded interviews were analyzed after writing down, we were using paper and pencil methods. Dialogs were openly coded. The analysis of these data arose following categories: the role of caregivers, the role of the teacher, communicator, the lawyer's role, the role of counselor, role of person who brings the change, the role of leader, manager's role, the role of researcher and categories of competence. Individual categories were assigned to subcategories. All informationwere are illustrated by clear diagrams of the individual categories. Conclusion: The Research shows that nurses have a general maintenance of the roles and competencies, actually both of sides, Namibia and Czech Republic also. both groups were mostly able to define roles in nursing care. Surprisingly czech nurses most failed in the role of the Advocate, while African colleague have proven to be very informed. Research also showed negative effect of paperwork and administration in czech system. Nurses having feeling they do not provide active care as they would be able to. Czech nurses seems also low initiative and ambitious, Czech nurses do not desire for increasing competence on the other hand African nurses, who have more competencies, want still more, than they already have.

Consumption of fiber in old age
ŠÁLEK, Jan
The theme of this bachelor thesis is the Consumption of fiber in the old age (seniors). Formerly, the dietary fiber was considered unnecessarily burdensome for human organism. Later, it was found that it has a relatively large impact on human health, especially by serving as a prebiotic for symbiotic bacteria inhabiting the gastrointestinal tract. There is still prevailing opinion that roughage divides into a soluble and insoluble, despite that some types of fiber cannot be definitely classified and placed into any of these groups because they have characteristics of both of them. The daily recommended dose is 30 g. The qualitative research was used for elaboration of the practical part. The first goal was to find out how much fiber seniors consume. The second aim was to compare the consumption of fiber among elderly people living alone and the elderly living in retirement homes built for them. The research group, at the first research question, consists of 20 seniors from the Southern Region aged over 65 years. The research group, at the second research question, consists of five retirement homes from the whole Czech Republic. All respondents were given a record sheet for one week, and instructions on how to fill it. Acquired menus were subsequently re-calculated through the program "Nutriservis Professional". The results show higher consumption of fiber than the average in the Czech Republic, but there is still almost a half missing to get the recommended daily dose. There was observed BMI and its impact on the consumption of fiber. No significant effect was found, because overweight had all interviewees except one respondent. The financial limit is visible for evaluated diet of homes for the elderly, therefore, there are no whole grain products, vegetables and almost no fruit. Despite these limitations, the average consumption of fiber is almost equal to elderly people living alone. In conclusion, there is a proposition how to, despite the low funds, increase the intake of roughage, and avoid or, at least, reduce the problems associated with its low consumption. Recommendations for respondents are individual and given under each evaluation.

How to prevent the proliferation of Legionella pneumophylis in hot water in the hospital Czech Krumlov
TUREK, Jan
This diploma thesis deals with microbiological quality of hot water in a hospital in Cesky Krumlov as well as hot water piping condition with respect to Legionella. It also deals with arrangements for improving the quality of hot water in this hospital. The subject and target of this thesis are the findings of the mentioned parameters based on own observations, technical documentation and analysis of warm water performed by an accredited laboratory. The hospital in Cesky Krumlov, the construction of which began in 1909, was built in 1911 as the 'Nemocnice Císaře Františka Josefa I.' As the time went by, new buildings were built up. The hospital was renamed to 'Všeobecná veřejná nemocnice' in 1942. In the following years the hospital expanded until the current condition. Water quality and presence of Legionella is a world-wide issue, which we must fight against. The thesis is divided into two parts. First, theoretical part, which includes both general and specific knowledge about Legionella, its health risks, the environment in which it occurs, possibilities of eliminating, suitability of the material for hot water pipes, gained in professional literature and a part of the Czech legislation dealing with public health protection, the law 'No. 258/2004 Coll.' in actual version and quality of drinking water and hot water. In the second, empirical part, I focus on the situation of the hospital in Cesky Krumlov from 2009 till 2015, concerning newly built boiler room and the whole distribution system of hot water regarding Legionella. Particularly I focused on materials used for ecologisation of the gas boiler room and materials used for hot water pipes and actual state of water distribution in individual buildings of this health care facility. I mentioned the analysis of the water samples performed by an accredited laboratory with corresponding technical documentation, which concerns the water distribution system, provided by the medical facility. I used secondary data analysis to evaluate these documents. Regarding the results from 2009 to 2015 the microbiological quality of warm water doesn't meet the limits defined in the Attachment No. 3 of the above mentioned law Order 252/2004 Coll. Limit value for colony forming units of Legionella is set to maximum of 100 CFU. In most of the samples this limit was exceeded by series of units up to hundred thousands of units. The last results in 2015 prove improvement of the unfavorable situation. In that year the analysis was tested three times. First in February, where the CFU units were 'only' in hundreds, with the top value of 550 CFU in the Postacute Care ward. Second analysis was performed in June that same year. Results were acceptable. The highest value was 64 CFU. Last analysis in the hospital was performed in December. Increased concentration of Legionella was again in the Surgery building. There were established of 1400 colony forming units. There were 300 CFU in the Postacute Care ward and the limit value of 100 CFU was in the ward of Internal medicine. The answers to research questions 'How to prevent reproduction of Legionella peumophylis in the water distribution system of the hospital in Cesky Krumlov?' and 'How to ensure a sufficient amount of quality hot water in the medical facility?' are included at the end of the stated recommendations. A risk factor causing the fast reproduction of Legionella is the old water distribution system in most of the buildings and low water temperature of water leaving the boiler, which is 55°C. All mentioned results and evaluations are included in this thesis as well as attached pictures, which show the environment and situation within the Health Care Institutions.

Strategie oplozování u ryb s vnějším oplozením
SIDDIQUE, Mohammad Abdul Momin
Morphological properties, species specific differences, development, and function of egg envelopes are of importance for a better understanding of fertilization strategies as well as for captive reproduction. We reviewed morphology and the developmental stages of egg envelopes, mechanism of polyspermy block, and also the role of micropyle and cortical granules in polyspermy block for acipenserid eggs. The structure of the egg envelope is similar among the acipenserids, comprising an external envelope (thecal cells, basal lamina, and follicular epithelium), a five-layered oocyte envelope (adhesive layer, alveolar layer, epilayer, and zona radiata externa and interna) and a layer of oocyte matrix and cortical granules. The development of acipenserid egg envelope within the ovary comprises five stages, with further changes following fertilization. Moreover, we standardized the terminology used to describe the egg membranes which can minimize the confusions and be helpful for future work on acipenserids eggs as well as for other fish species. The sperm to egg ratio (required to fertilize eggs) and effects of pre-incubation of eggs in freshwater before fertilization were studied to standardized fertilization protocols for sterlet Acipenser ruthenus. Pre-incubation time had no effect on fertilization success at 430,000:1 and 43,000:1 sperm to egg ratios, while it was significant at the 4300:1 and 430:1 ratios. The use of adequate experimental suboptimal sperm to egg ratio revealed a positive effect of pre-incubation time, such that at the 430:1 ratio, 0.5 min pre-incubation increased the fertilization rate than 10 min. Transmission electron microscopy showed that pre-incubation of eggs in water for <10 min did not trigger a cortical reaction, suggesting that a low sperm to egg ratio 0.5 to 1 min pre-incubation of eggs in freshwater prior to fertilization can enhance fertilization rate of sterlet (minimally do not change fertilization). The effects of pre-incubation in seawater and the duration of egg receptivity were determined for fresh and over-ripe sea bass eggs. Our results revealed a significant effect of pre-incubation time for both the fresh (P < 0.01) and over-ripe eggs (P < 0.01). The fresh eggs had a higher fertilization success than over-ripe eggs. Fertilization success of eggs significantly declined for both of these treatments after 3 min of pre-incubation clearly indicated that sea bass eggs are able to be fertilized by sperm for up to 3 min after release into seawater. Effects of pre-incubation of eggs and activation medium on the percentage of eyed embryos for Ide Leuciscus idus were examined. At the eyed-egg stage, pre-incubation time was significant for the freshwater activation medium (P < 0.001), such that the percentage of eyed embryos declined across the pre-incubation time gradient. Activating medium had a significant effect on the percentage of eyed embryos for each pre-incubation time (P < 0.05). More precisely, freshwater produced the lowest percentage of eyed embryos at all pre-incubation times, whereas saline water and Woynarovich solution produced the highest percentage of eyed embryos at 0 s and 30 s before incubation. Examination of sperm traits showed no impact of activating medium on computer assisted sperm analysis parameters. Our results suggested that saline water or Woynarovich solution improve fertilization rate in Ide during fertilization. In conclusion, this thesis provides basic knowledge on gamete biology, role of egg receptivity period, effects of pre-incubation of eggs and different activating medium which can be useful to understand the fertilization strategies of different externally fertilizing fishes as well as standardize their fertilization protocol for captive reproduction.

Global Economy Outlook - September 2016
Česká národní banka
The September issue of Global Economic Outlook presents the regular monthly overview of recent and expected developments in selected territories, focusing on key economic variables: inflation, GDP growth, leading indicators, interest rates, exchange rates and commodity prices. In this issue, we also focus on the closing of the output gap in OECD countries in the current low-inflation environment. We point out that the output gap is currently closing at near-zero inflation rates rather than at rates close to 2% (corresponding to the generally accepted price stability criterion). The current output gap and inflation outlooks signal a gradual return to the output gap closing at consumer inflation rates of approximately 2%.
Fulltext: Download fulltextPDF; Download fulltextPDF