|
|
Small apartment house
Kaňovský, Michal ; Jurka,, Jiří (referee) ; Utíkalová, Ivana (advisor)
ABSTRACT The aim of the bachelor’s work is a composition of project documentation for the construction building of apartment building. The object is situated on the cadastral area of Myslibořice on plot number 9/1. The apartment building is designed as separated, three storeys, flat roof building without basement. There are five apartment units in total, from which one is designed for people with movement disabilities. To each apartment unit belong one basement cellar. The building stands on foundation strips. The construction system of the object is wall system. External walls are made of Porotherm brick blocks with thermal insulation from expanded polystyrene. The inside vertical load-bearing constructions are made of acoustic brick blocks. The horizontal load-bearing constructions are made of reinforced concrete slab and of precast floor slab Spiroll. The building is roofed with single layer hipped roof.
|
|
|
Apartment house
Hrabovský, Kristián ; Skřek, Daniel (referee) ; Donaťáková, Dagmar (advisor)
The subject of the bachelor thesis is to design a design documentation for an apartment building. The property is located on plot 4954/1 in the cadastral territory of the town of Žilina. The apartment house has three above-ground floors, and it is house with cellar. The entrance to the house is designed on the half landing. In each above-ground floor there are 3 flats, there are 9 flats in the whole house. Two flats are designed as 3+KK and there are mirror-facing opposite each other. The middle flat is designed as 2+KK. Flats are available from the main landing staircase. In the mirror of the staircase there is an elevator. The building is designed in the construction wall system Porotherm. Ceiling constructions are designed as prestressed panels spiroll. The staircase, including landings, are designed as a monolithic ceiling. The foundation constructions under the walls are designed as a strip foundations.
|
|
|
Apartment building in Hrotovice
Kuchaříková, Andrea ; Janda, Lukáš (referee) ; Brzoň, Roman (advisor)
The aim of the bachelor´s work is a composition of project documentation for the construction building of apartment building. The object is situated on the cadastral area of Hrotovice on plot number 278. The apartment building is designed as separated, three storeys, flat roof building withnout basement. There are six apartment units in total, from witch one is deisgned for people with movement disabilities. To each apartment unit belong one basement cellar. There are two garages, first with five parking palaces, second with one parking place for people with movement disabilities. The building on foundation strips. The construction system of the object is wall system. Extrenal walls are made od Porotherm brick blocks with thermal insulation from expanded polystyrene. The inside vertical load-bearing contructions are made od acoustic brick blocks with mortar pockets. The horizontal load-bearing constructions are made of reinforced concrete slabs. The building is roofed with single layer flat roof.
|
|
|
Family House with Workroom
Ćmielová, Iwona ; Potužník, Michal (referee) ; Mátl, Miroslav (advisor)
The subject of this bachelor’s thesis is the new building of family house with workroom (hairdresser’s) in Návsí. The family house is located on flat land on the outskirts of the village. The building does not have a basement and has two above – ground floors. In the first floor there is a workroom and entrance to the living area. The house is designed for a family of four. The building is made of wall construction system Porotherm, the roof of the house and the workroom is gabled. The project will also include the parking lots and pavements.
|
|
|
Medical Center
Pospíšil, Václav ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The subject of my diploma thesis is the design of a new medical center MEDCEN in the area of the Jihlava hospital, on plot no. 4374/1. The total land area is 22 706 m2. The building has three aboveground and one underground floor. The vertical bearing structure consists of masonry ceramic elements, which are complemented by a monolithic, water-reinforced concrete in the underground floor. Vertical peripheral structures are equipped with thermal insulation system, in the above-ground floors with ventilated facade. The vertical load-bearing structures are made of prefabricated reinforced concrete panels and reinforced by reinforced concrete beams at the local load. The whole building is designed flat single-skin roof with a classic order of layers, where the main waterproofing layer consists of plasticized PVC foils. The layout of the building is divided into left and right wing, which connects the central central part. The entire underground floor is designed to be operational, there are parking spaces for employees, storage facilities and technical facilities of the building. Individual offices, nurses and waiting rooms are designed on all above-ground floors. In the central central part are designed sanitary rooms for visitors and employees. On the first floor is a pharmacy and X-ray examination room. On the third floor there are two office management offices and one-day surgery premises.
|
|
|
Multi-generational house Paskov
Pavlasová, Denisa ; Žajdlík, Tomáš (referee) ; Šuhajdová, Eva (advisor)
The subject of the submitted bachelor’s thesis was the elaboration of project documentation for the construction of a multi-generational house. The building is located in the town of Paskov, district Frýdek - Místek, cadastral area Paskov. The building is designed as a detached two-storey building with a partial basement on flat ground. There are two residential units for a total of six people. The building also includes a garage with two parking spaces. There are also three additional unroofed parking spaces on the property. The entrance to the house is situated on the east side. Most of the living rooms have been placed on the south and west sides. As a structural system, ceramic masonry of the Porotherm type was chosen, which is used in the above-ground floors as well as load-bearing and non-load-bearing interior walls throughout the building. The perimeter walls in the basement are made of monolithic reinforced concrete walls. Horizontal load-bearing structures are made on each floor with ceramic beams and inserts. The staircase is monolithic reinforced concrete. The perimeter walls are insulated above ground level using mineral wool. The whole building is roofed with a single-skin flat roof.
|
|
|
Apartment building
Hubáček, Radim ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The subject of the bachelor thesis is the project documentation for the construction of the apartment building with almost zero energy consumption. The main objectives of the thesis include the design of the layout, construction and material solutions. The residential building is located on an almost flat terrain with a slight slope on the eastern edge of the village Modrá. It is a five-storey fully basemented building. None of the residential units are designed as barrier-free for people with limited mobility, but access to the building is barrier-free. If necessary, it is possible to change the layout of one of the apartments to a barrier-free apartment. The vertical load-bearing structures are made of ceramic blocks. Perimeter walls are made of thermally insulating ceramic blocks. The building is based on a foundation slab with stiffening foundation strips securing the slab for uplift due to groundwater. The foundation slab is connected to the reinforced concrete perimeter walls of the basement and both the walls and the foundation slab are made of waterproof concrete due to the presence of groundwater. The perimeter masonry is made of thermally insulating ceramic blocks with integrated mineral wool. The horizontal load-bearing structures are made of monolithic concrete. The roof is designed as a flat single-skin vegetated roof. The apartment building has 12 residential units, non-residential premises, fitness and technological facilities. Parking spaces are located in the outdoor area behind the building. The building has been assessed for fire safety, thermal engineering, acoustics, sunlight and daylighting and has met all investment and regulatory requirements.
|
|
|
Apartment building
Kuňák, Radim ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The aim of this bachelor thesis is to prepare the design documentation of a new residential building that will meet the requirements and conditions for a building with almost zero energy consumption. This apartment building has been designed in such a way that its operation does not interfere with or restrict the operation of adjacent apartment buildings on adjacent land in the vicinity. The new apartment building is situated in the town of Zlin, in the cadastral and urban part of Priluky u Zlina. Among the advantages belonging to this plot is its flatness, which will facilitate the process of construction of the apartment building or other adjacent buildings. On the land used by us, a parking lot will be designed with 24 parking spaces, one of which is intended for people with mobility disabilities and the other for families with children, these parking spaces are located closest to the entrance to the BD on the west side. The residential building is designed as a four-storey, partially basemented building. In the apartment building are sized storage spaces, technical facilities of relevant technologies, common areas serving as a place of recreation for the residents of the BD and separate residential units. The total number of residential units is 15. They are divided into 3 layout categories - 1+kk, 2+kk, 3+kk. Residential units on the 1st floor have recreational space terraces. Residential units in 2.NP and 3.NP have balconies or loggias designed for recreation. The largest apartment in the 4th floor has a spacious terrace on the vegetated roof designed for this purpose. If necessary, the layout of apartments and common areas can be changed to meet the requirements of barrier-free use of the building by people with disabilities. The bachelor thesis has been prepared in accordance with the current legislation of the Czech Republic as of the date of submission of this bachelor thesis.
|
|
|
Apartment building
Klučková, Jana ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The subject of this bachelor's thesis is the development of project documentation for an apartment building with almost zero energy consumption. The object of the apartment building is a building consisting of four above-ground floors and one above-ground floor. In the basement of the building, its technical equipment is located, which is located together with common storage areas and storage areas for individual housing units. There are 10 apartment units on the upper floor, and there are also office spaces on the 3rd floor. The building has a designed wall construction system, it has a full basement, which is based on foundation strips, and its roofing is solved by a flat vegetated roof.
|
|
|
Flat house SNP
Líner, Ondrej ; Pilný, Ondřej (referee) ; Kolář, Radim (advisor)
The goal of the bachelor’s thesis is the elaboration of project documentation for a newbuilt flat house in Turčianske Teplice. Flat house is designed as four-storey, non-basement building, which houses a total of 15 residential units. The building has a wall construction system made of THERM type ceramic blocks. The ceiling structures are made of reinforced concrete monolithic slabs. The individual floors are connected by a two-arm staircase and a barrier-free elevator. The roofing of the building is designed as a single-skin flat roof. Insulation of the building is provided by an external thermal insulation composite system made of mineral wool.
|
guest ::
